StrongARM
High-performance ARM microprocessor family for portable devices
Digital Equipment Corporation developed the StrongARM family in the mid-1990s to bring high performance to low-power embedded systems. Intel acquired the technology in 1997 and produced variants like the SA-1100 and SA-1110 before replacing the line with XScale.
- First announced in February 1996 with speeds up to 200 MHz
- Used a 0.35 micrometre CMOS process with 2.5 million transistors
- Acquired by Intel in 1997 as part of a patent lawsuit settlement
- Powered early PDAs like the Apple MessagePad 2000 and Compaq iPAQ
What it is
The StrongARM is a family of microprocessors that implemented the ARM v4 instruction set. Digital Equipment Corporation created it in the mid-1990s to offer higher performance for low-power embedded applications than existing ARM chips could provide. The design targeted devices such as personal digital assistants and set-top boxes. Intel acquired the technology in 1997 and continued production before eventually replacing it with the XScale architecture.
How it came about
Engineers at DEC initially attempted to create a low-power version of their Alpha processor but found it unfeasible. They turned to ARM designs instead, collaborating with Advanced RISC Machines. To access top talent, DEC opened a design centre in Palo Alto, California, led by Dan Dobberpuhl, with another team in Austin, Texas. The project launched in 1995 and quickly produced the SA-110. Intel bought the division in 1997 to replace its own struggling RISC lines.
Inside the chip
The SA-110 used a simple scalar microarchitecture with a five-stage pipeline that executed instructions in order. It lacked branch prediction hardware but included mechanisms for fast branch processing. The chip featured separate 16 KB caches for instructions and data, which were virtually addressed to allow simultaneous cached and uncached memory access. A phase-locked loop generated the internal clock from an external signal. The design prioritised high cache hit rates to support slower, cheaper external memory.
How it was made
DEC fabricated the initial SA-110 chips at its Fab 6 facility in Hudson, Massachusetts, using its proprietary CMOS-6 process. This technology had a feature size of 0.35 micrometres. The die measured roughly 50 square millimetres and contained 2.5 million transistors. Later variants like the SA-1500 used a 0.28 micrometre process. The chips operated on variable voltages between 1.2 and 2.2 volts to balance power consumption with performance needs.
Where it went
The SA-110 powered the Apple MessagePad 2000 and the Acorn Risc PC. The SA-1100 variant appeared in the Psion netBook and Series 7. Intel’s SA-1110 drove popular personal digital assistants like the Compaq iPAQ and HP Jornada, as well as the Sharp SL-5x00 Linux platforms. It also ran the Intel Web Tablet prototype. The SA-1500 was intended for set-top boxes but saw limited production.
Versions and family
The SA-110 was the first model, with speeds up to 233 MHz. The SA-1100 added integrated memory and peripheral controllers for portable devices. The SA-1110 supported faster SDRAM and came in 133 or 206 MHz versions. The SA-1500 included an Attached Media Processor for multimedia tasks and ran up to 300 MHz. Intel discontinued the line in the early 2000s, replacing it with the XScale family.
Why it matters
StrongARM established that ARM-based chips could deliver high performance for portable computing, challenging the dominance of other architectures in the embedded space. Its design influenced subsequent low-power processors. The transfer of engineering talent from DEC to startups like SiByte and Alchemy Semiconductor helped spread expertise in system-on-chip design for networking and handheld markets.
Questions people ask about StrongARM
Who originally designed the StrongARM processor?
Digital Equipment Corporation designed the StrongARM in collaboration with Advanced RISC Machines. The main design work took place at a DEC centre in Palo Alto, California, led by Dan Dobberpuhl.
What devices used the StrongARM chip?
It powered personal digital assistants like the Apple MessagePad 2000, Compaq iPAQ, and Psion netBook. It was also used in the Acorn Risc PC, thin client systems, and some early Linux-based handheld platforms.
Why did Intel buy the StrongARM technology?
Intel acquired the StrongARM line from DEC in 1997 as part of a settlement for a patent infringement lawsuit. Intel used it to replace its own underperforming i860 and i960 RISC processor lines.
What replaced the StrongARM family?
Intel developed a new core based on StrongARM technology called XScale. Introduced in 2000, XScale eventually replaced the StrongARM line entirely in the early 2000s.
Good reading and sources
The facts on this page come from the Wikipedia article "StrongARM", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like StrongARM
All CPUs and microprocessorsMore from Digital Equipment Corporation
All of them
🇺🇸 United StatesPentium II
Intel's 1997 P6 desktop CPU line with MMX, sold in a slot cartridgeCPU · x86 · 1997