POWER3
64-bit PowerPC microprocessor for IBM workstations and servers
The POWER3 is a 64-bit microprocessor designed and made by IBM. Launched in October 1998, it completed the transition from the POWER to the PowerPC instruction set. It powered high-end RS/6000 systems and the ASCI White supercomputer.
- Launched on 5 October 1998 in RS/6000 workstations
- Powered the ASCI White, the top-ranked supercomputer
- Contains 15 million transistors on a 270 mm² die
- Executes up to four instructions per cycle
- Successor to the P2SC and predecessor to POWER4
What it is
The POWER3 is a microprocessor created by IBM that executes the 64-bit PowerPC instruction set. It includes optional instructions from the earlier POWER ISA that were missing from standard PowerPC definitions. Introduced on 5 October 1998, it debuted in the RS/6000 43P Model 260 graphics workstation. This chip marked the end of IBM’s delayed shift from its proprietary POWER architecture to the industry-standard PowerPC framework. It was originally intended to be named the PowerPC 630 but was rebranded to distinguish server-class hardware from consumer products.
How it came about
Development aimed to replace the P2SC derivative of the POWER2 chip. The design drew heavily from the PowerPC 620, an earlier 64-bit implementation that had failed commercially due to poor performance and delays. IBM engineers retained the three fixed-point units of the 620 but significantly upgraded floating-point capabilities. The project finished the migration to PowerPC, a move initially planned for 1995. The renaming from PowerPC 630 to POWER3 helped clarify its role in enterprise computing rather than personal devices.
Inside the chip
This superscalar processor executes instructions out of order to maximize efficiency. It features a seven-stage integer pipeline and separate pipelines for load/store and floating-point operations. The front end fetches eight instructions per cycle into a buffer before decoding four for issue. Three integer units handle general math, while two floating-point units perform fused multiply-add operations. Register files are duplicated to reduce port contention, with 48 general-purpose and 56 floating-point registers available. The design allows up to four instructions to retire each cycle.
How it was made
IBM manufactured the original POWER3 using its CMOS-6S2 process. This hybrid technology combined 0.25 μm feature sizes with 0.35 μm metal layers and five aluminium interconnect levels. The die measured 270 mm² and contained 15 million transistors. It used a 1,088-pin ceramic column grid array package. The later POWER3-II variant shrank to 170 mm² with 23 million transistors. This updated version used the 0.22 μm CMOS7S process with copper interconnects, allowing higher clock speeds.
Where it went
The chip powered IBM RS/6000 servers and workstations, initially running at 200 MHz. Its most notable application was in the ASCI White supercomputer. This system reached the number one position on the TOP500 list by combining POWER3 processors with a specialized Nighthawk chipset and SP network. In the market, it competed directly with the Digital Equipment Corporation Alpha 21264 and the Hewlett-Packard PA-8500. These rivals offered similar high-performance computing capabilities for technical and scientific tasks.
Versions and family
The POWER3-II improved upon the original design by raising the clock frequency to 450 MHz. It achieved this through a smaller manufacturing process and refined layout. The successor to the entire line was the POWER4, which arrived in 2001. The POWER3 itself replaced the P2SC, a derivative of the POWER2 architecture. No other major variants are described in the provided material beyond the standard and the II revision.
Why it matters
By implementing the full 64-bit PowerPC ISA, the POWER3 unified IBM’s server and workstation lines under one instruction set. It enabled the ASCI White to become the world’s fastest supercomputer at its launch. The design choices, such as duplicated register files and fused multiply-add units, influenced subsequent high-performance processors. It successfully competed against established RISC architectures from DEC and HP during the late 1990s.


Questions people ask about POWER3
What instruction set does the POWER3 use?
It implements the 64-bit version of the PowerPC instruction set architecture. It also includes optional instructions from the POWER ISA that were not part of the standard PowerPC definition at the time.
How many transistors are in the POWER3?
The original POWER3 contains 15 million transistors. The later POWER3-II variant increased this count to 23 million transistors due to process improvements and design changes.
What was the POWER3 originally called?
It was originally supposed to be named the PowerPC 630. IBM likely renamed it to POWER3 to differentiate these server-oriented processors from the consumer-focused 32-bit PowerPC chips.
Which supercomputer used the POWER3?
The ASCI White supercomputer utilized the POWER3. It combined these processors with a specialized Nighthawk chipset and SP network to achieve the number one spot on the TOP500 list.
Good reading and sources
The facts on this page come from the Wikipedia article "POWER3", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like POWER3
All CPUs and microprocessors
🇺🇸 United StatesPOWER5
Dual-core server microprocessor with simultaneous multithreadingCPU · Power · 2004