IBM RS64
64-bit microprocessor family for IBM commercial servers
IBM introduced the RS64 family in the mid-1990s to power AS/400 and RS/6000 servers. These chips used the PowerPC-AS instruction set, optimising integer performance for commercial workloads rather than floating-point maths.
- First mass-market processor with multithreading
- Clock speeds reached 750 MHz in RS64-IV
- Used PowerPC-AS instruction set architecture
- Manufactured using SOI process in IStar variant
- Optimised for integer commercial workloads
What it is
The IBM RS64 is a series of microprocessors launched in 1997 for enterprise servers. It implements the PowerPC-AS architecture, a superset of PowerPC with extensions for commercial computing. IBM designed these chips to handle integer-heavy tasks and frequent branching, common in business applications. Unlike the POWER family, which targets scientific floating-point calculations, the RS64 prioritises large caches and branch prediction. The family served both AS/400 and RS/6000 systems until IBM merged the lines with the POWER4 processor.
How it came about
Development began in 1990 at IBM Rochester to replace the IMPI architecture in AS/400 machines. Engineers initially proposed C-RISC, but management favoured extending the PowerPC set instead. This extension, named Amazon, allowed a single design to serve high-end RS/6000 servers and AS/400 systems. Early projects like Bellatrix failed due to complexity, leading to simpler designs like Cobra. The RS64 line evolved through several generations, incorporating feedback from both workstation and mainframe teams before being superseded by unified architectures.
Inside the chip
These processors use an in-order pipeline optimised for commercial code. The RS64-II introduced coarse-grained multithreading, allowing two threads to share one core. When one thread waits for data, the other executes, improving efficiency during cache misses. Later models like the RS64-III featured five-stage pipelines and improved branch prediction to reduce penalties. The chips support large off-chip L2 caches via wide buses, ensuring high bandwidth for data-intensive server tasks. Floating-point units are present but less emphasised than in scientific processors.
How it was made
IBM manufactured the RS64 family using various processes, starting with 0.5 μm CMOS for the Cobra chip. Later versions moved to BiCMOS, then to 0.35 μm and 0.22 μm CMOS with copper interconnects. The RS64-III IStar variant was the first to use silicon-on-insulator (SOI) technology. Transistor counts grew from 4.7 million in the initial Cobra to 44 million in the RS64-IV. Die sizes varied, with the RS64-IV measuring 128 mm². Packaging included ceramic ball grid arrays for thermal management.
Where it went
These chips powered IBM AS/400 and RS/6000 server systems. They handled commercial workloads such as database management and enterprise resource planning. The RS64-II allowed upgrades without replacing entire systems, supporting four-way symmetric multiprocessing boards. High-end configurations scaled to twelve processors in a single machine. The family competed with Sun Microsystems processors in the UNIX server market, offering strong integer performance for business applications while maintaining low power consumption per core.
Versions and family
The lineage includes Cobra (A10), Muskie (A25/A30), RS64 (Apache/A35), RS64-II (Northstar/A50), RS64-III (Pulsar/IStar), and RS64-IV (Sstar). Clock speeds rose from 50 MHz to 750 MHz. The IStar was a refined Pulsar using SOI fabrication. The RS64-IV supported up to 16 MB of L2 cache. Each generation increased transistor density and reduced process node size. The family ended when IBM introduced the POWER4, which combined the RS64 and POWER lines into a single architecture.
Why it matters
The RS64 family demonstrated that PowerPC could scale to high-end enterprise servers. Its focus on commercial integer performance filled a gap between workstation chips and mainframe processors. The introduction of coarse-grained multithreading influenced later processor designs. By using SOI and copper interconnects early, IBM advanced its manufacturing capabilities. The series maintained competitiveness against rival UNIX server chips until the industry shifted towards unified architectures like POWER4.



Questions people ask about IBM RS64
What instruction set does the RS64 use?
It uses PowerPC-AS, also known as Amazon. This is a superset of the standard PowerPC architecture with added features for commercial computing, derived from POWER2 and AS/400 requirements.
How does RS64 multithreading work?
The RS64-II uses coarse-grained multithreading. It stores state for two threads. If the active thread waits for data, the processor switches to the second thread, keeping the hardware busy during latency periods.
Which servers used the RS64 chips?
IBM used these processors in its AS/400 and RS/6000 server lines. They were designed to handle enterprise tasks like database management and supported configurations with up to twelve processors.
Good reading and sources
The facts on this page come from the Wikipedia article "IBM RS64", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like IBM RS64
All CPUs and microprocessorsMore from IBM
All of them
🇺🇸 United StatesCyrix 5x86
High-performance x86 CPU for legacy Socket 3 systemsCPU · x86 · 1995