POWER1
IBM's first high-end RISC processor, launched in 1990.
The POWER1 is a multi-chip central processing unit designed and built by IBM. Released in 1990, it implemented the new POWER instruction set architecture. It was IBM's first successful RISC chip for high-end workstations and servers, introducing advanced features like out-of-order execution to commercial systems.
- First IBM RISC processor for high-end applications
- Introduced out-of-order execution to workstations
- Multi-chip design with 6.9 million transistors
- Launched in 1990 with RS/6000 systems
- Used 1.0 μm CMOS fabrication process
What it is
The POWER1 is a central processing unit developed by IBM. It arrived in 1990 as the heart of the RS/6000 series. This processor uses the POWER instruction set architecture. It was originally called the RISC System/6000 CPU. The name changed to POWER1 to match later versions. It was IBM's first successful reduced instruction set computer for high-end tasks. Previous attempts like ROMP did not succeed in this market. The chip introduced mainframe-level techniques to workstations.
How it came about
IBM launched the POWER1 in 1990 with its POWERstation and POWERserver lines. Initial models ran at 20, 25, or 30 MHz. Improved manufacturing allowed faster versions later. The POWER1+ appeared in 1991 with speeds up to 41 MHz. The POWER1++ followed in 1992, reaching 62.5 MHz. These upgrades used better semiconductor processes. In September 1993, the POWER2 replaced the original design. The POWER1 lineage also produced the RISC Single Chip for entry systems. A radiation-hardened version called RAD6000 served space missions. The PowerPC 601 for consumers also derived from this architecture.
Inside the chip
This processor is a 32-bit two-way superscalar design. It splits work across three main units. The fixed-point unit handles integer math and data moves. The floating-point unit manages decimal calculations with high precision. The branch unit predicts program flow to keep pipelines full. It supports out-of-order execution and register renaming. These features boost performance by avoiding idle cycles. The system uses a Harvard cache structure with separate storage for instructions and data. Virtual addresses are 52 bits long, allowing large memory spaces for applications. It operates in big-endian mode.
How it was made
IBM fabricated the chips using a 1.0 μm CMOS process. The design spreads across multiple distinct chips connected by buses. These include units for caching, calculation, control, and input/output. They sit on an eight-layer printed circuit board. Ceramic packages hold each chip, which can dissipate up to 4 W of heat. A full RIOS-1 configuration contains 6.9 million transistors. Most of these serve memory functions rather than logic. The total silicon area for all chips combined is 1,284 mm2. Signal routing requires 1,464 pins across the modules.
Where it went
The POWER1 powered IBM RS/6000 workstations and servers. These machines served scientific and technical computing needs. The architecture supported clustering to mimic multiprocessing. This approach helped overcome the single-thread limit of the chip. The popular IBM RS/6000 SP supercomputer used this method. Derivatives found roles in entry-level systems and space hardware. The RISC Single Chip served smaller RS/6000 models. The RAD6000 variant handled radiation-heavy environments in space. Consumer devices later used the related PowerPC 601 chip.
Versions and family
Two main configurations existed based on cache size. The RIOS-1 used four data-cache units for a 128-bit memory bus. It ran at higher frequencies up to 40 MHz. The RIOS.9 used two data-cache units for a 64-bit bus. It operated at lower clock speeds. Later variants included the POWER1+ and POWER1++. These offered higher clock rates through process improvements. The RISC Single Chip was a simplified single-chip version. The RAD6000 was a radiation-hardened derivative for space use. The PowerPC 601 was an indirect consumer-focused descendant.
Why it matters
The POWER1 established IBM as a leader in RISC computing. It brought register renaming and out-of-order execution to commercial processors. These techniques were previously found only in mainframes. The chip launched the long-running POWER and PowerPC families. Hundreds of implementations followed this initial design. It proved that modular multi-chip designs could deliver high performance. The architecture influenced subsequent generations like POWER2 and POWER3. Support for the original instruction set was eventually dropped from GCC compilers.


Questions people ask about POWER1
What makes the POWER1 different from earlier IBM processors?
It was IBM's first successful RISC chip for high-end use. Unlike the failed ROMP, it implemented advanced features like out-of-order execution and register renaming. These techniques improved performance significantly over previous designs.
Why is the POWER1 made of multiple chips?
The design splits functions like caching, calculation, and control onto separate dies. This modular approach allowed IBM to create different configurations by changing the number of cache units. It also helped manage heat and complexity.
Did the POWER1 support multiprocessing?
No, the single CPU module did not support multiprocessing directly. IBM used clustering of multiple systems to achieve similar results. True multiprocessing support arrived later with the POWER3 processor in 1998.
What was the clock speed of the original POWER1?
The initial models launched in 1990 ran at 20, 25, or 30 MHz. Later variants like the POWER1+ and POWER1++ reached higher speeds up to 62.5 MHz thanks to improved manufacturing processes.
Good reading and sources
The facts on this page come from the Wikipedia article "POWER1", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like POWER1
All CPUs and microprocessorsMore from IBM
All of them
🇺🇸 United StatesI486
32-bit microprocessor with on-chip cache and FPUCPU · x86 · 1989
WorldIBM 386SLC
IBM’s low-power 386SX-compatible processor for portable systems.CPU · x86 · 1991
🇺🇸 United States and 1 moreMwave
IBM digital signal processor for combined audio and telephonyDSP · Other · 1992