
Intersil 6100
A 12-bit CMOS microprocessor that runs the PDP-8 instruction set on one chip
The Intersil 6100 is a single-chip microprocessor that implements the 12-bit PDP-8 instruction set, built by Intersil and also produced by Harris. Introduced in 1975 and sold until 1982, its CMOS construction gave it very low power draw, which made it useful in embedded and military equipment.
- Single-chip implementation of the 12-bit PDP-8 instruction set
- Introduced in Q2 1975; Harris version followed in 1976
- Under 100 mW at 10 V and 2 MHz, running from 4 to 11 V
- About 4,000 transistors in a 40-pin DIP
- Used in DEC's 1977 DECmate line and the Hagelin HC-520
What it is
The Intersil 6100, also called the IM6100, is a microprocessor that puts the whole 12-bit PDP-8 instruction set onto a single chip. Intersil developed it in the mid-1970s alongside support and memory chips, launching it in the second quarter of 1975. Harris Corporation made the part too, under the name HM-6100, from 1976. Some people called it the CMOS-PDP8. What set it apart from rivals such as the Z80, 8080, 6502 and 6800 was its CMOS construction, which kept power draw under 100 mW at 10 V and 2 MHz and let it run from a single 4 to 11 V supply.
How it came about
Intersil introduced the 6100 in the second quarter of 1975, and Harris followed with its own version in 1976. The chip was sold commercially as the IM6100 family through 1982. Being dual sourced by two companies helped it win military work, where it served as a low-power substitute for the 8080 and 6800. Commercially it struggled, because it was not priced competitively and the offering failed. The arrival of the IBM PC in 1981 finished off the so-called CMOS-8s.
Inside the chip
The 6100 is a 12-bit CPU that closely emulates the PDP-8. It has three main registers: a program counter, a 12-bit accumulator called AC, and an MQ register for multiplier and quotient values. Two-operand instructions read AC and MQ and write back to AC. There is no stack pointer, so a subroutine stores its return address in its own first word, which is awkward in ROM. Conditionals can only skip the next instruction, so branches pair a conditional with a jump. A single maskable interrupt saves the PC at address 0000 and runs from 0001. The 12-bit bus caps RAM at 4K words (6 KB); the 6102 chip adds three address lines for 32K words (48 KB).
How it was made
The family was built with CMOS, unlike the bipolar and NMOS parts most rivals used. That choice, plus modest clock speeds, kept power below 100 mW at 10 V and 2 MHz and allowed a single supply anywhere from 4 to 11 V. The CPU held about 4,000 transistors and shipped in a 40-pin dual in-line package. Intersil and Harris both fabricated the device, and it was offered to military specification.
Where it went
Low power draw and ruggedness suited the 6100 to embedded systems that had previously relied on discrete logic, motorised rotary switches or relay controllers. It appeared in military products as a frugal alternative to the 8080 and 6800. Commercial uses included DEC's 1977 DECmate line, the company's first attempt at a personal computer, and Pacific Cyber/Metrix's PCM-12 in 1976, which Byte magazine reported as its first use. Its appetite for power made it a fit for the battery-driven Hagelin HC-520 portable cipher machine of 1977.
Versions and family
Intersil sold a set of companion chips: the IM6101 Programmable Interface Element for I/O, the IM6102 MEDIC memory extension, DMA and timer unit, the IM6103 parallel port, and the IM6402 and IM6403 UARTs. Memory parts included the IM6551 and IM6561 1 Kbit SRAMs, the IM6512 768-bit SRAM and the IM6312 12 Kbit PROM. These could be bought in a CMOS Family Sampler Kit or on the 6960 board. The line later moved to the 6120, which folded the 6102 memory controller into the CPU.
Why it matters
The 6100 showed that a full minicomputer instruction set could live on one low-power CMOS chip, opening embedded work that had been done with discrete logic or relays. Dual sourcing from Intersil and Harris gave buyers a second supplier, a real advantage in military programmes. It powered DEC's first personal computer effort and a portable cipher machine. Still, weak pricing held back sales, and the IBM PC's arrival in 1981 ended the CMOS-8 idea as a commercial force.
Problems and reception
The chip earned respect for its simplicity and its very low power needs, and it met military specification. Its instruction set was very basic, with no stack pointer and only single-instruction skips for conditionals, which made ROM-based subroutines awkward. Commercially the family disappointed: Intersil priced it uncompetitively, the offering failed, and the IM6100 line ended in 1982.

Questions people ask about Intersil 6100
What is the Intersil 6100?
It is a microprocessor that puts the 12-bit PDP-8 instruction set onto a single chip. Intersil launched it in 1975 and Harris Corporation made its own version from 1976. Because it used CMOS, it drew very little power and could run from one supply between 4 and 11 V.
Why did it use so little power?
The 6100 was built with CMOS rather than the bipolar or NMOS processes behind chips like the Z80, 8080 and 6502. Combined with low clock speeds, that kept consumption under 100 mW at 10 V and 2 MHz, so systems needed little cooling if the rest of the board was CMOS too.
How much memory could a 6100 system have?
Its 12-bit data and address bus limited RAM to 4K words, or 6 KB. Adding the optional 6102 support chip brought three more address lines, raising the total to 32K words (48 KB), with its IFR and DFR registers offsetting the 4K page on each access.
What products used the 6100?
It appeared in DEC's 1977 DECmate line, the company's first personal computer attempt, and in Pacific Cyber/Metrix's PCM-12 in 1976. Its low power draw also suited the battery-powered Hagelin HC-520 portable cipher machine of 1977, plus various military and embedded systems.
What replaced it?
The basic 6100 was later upgraded to the 6120, which had the 6102 memory controller built in. Intersil sold the IM6100 family commercially through 1982, but pricing was uncompetitive and the line failed, with the IBM PC arriving in 1981.
Good reading and sources
- Intersil 6100 on WikipediaEncyclopedia
- More photos on Wikimedia CommonsPhotos
- Wikidata recordOpen data
The facts on this page come from the Wikipedia article "Intersil 6100", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like Intersil 6100
All CPUs and microprocessorsMore from Intersil
All of them
🇺🇸 United StatesIntel 80286
16-bit x86 CPU with protected mode and 24-bit addressing, launched in 1982CPU · x86 · 1982
🇺🇸 United StatesIntel 80286
16-bit microprocessor with protected mode and 16 MB memory supportCPU · x86 · 1982
🇺🇸 United StatesIntel 80286
16-bit microprocessor with protected mode and 16 MB memory supportCPU · x86 · 1982