Cell Broadband Engine
A multi-core RISC processor pairing one PowerPC core with eight vector coprocessors.
The Cell Broadband Engine is a 64-bit RISC multi-core processor built by Sony, Toshiba and IBM under the STI alliance. Work began in March 2001 and the chip appeared in the PlayStation 3 in 2006, later powering IBM's Roadrunner, the first supercomputer to sustain one petaFLOPS.
- Designed by Sony, Toshiba and IBM as the STI alliance
- One PowerPC PPE plus eight Synergistic Processing Elements
- PlayStation 3 chips run at 3.2 GHz with 250 million transistors
- Powered Roadrunner, the first one-petaFLOPS supercomputer
- Moved from 90 nm to 65 nm in 2007 and 45 nm in 2008
What it is
The Cell Broadband Engine is a 64-bit reduced instruction set multi-core processor and microarchitecture, designed by Sony, Toshiba and IBM together as the STI alliance. It pairs one general-purpose PowerPC core, called the Power Processing Element, with several specialised coprocessors named Synergistic Processing Elements that handle multimedia and vector maths. Introduced in November 2006, it first appeared in Sony's PlayStation 3 console. A modified version later powered IBM's Roadrunner, the first machine to sustain one petaFLOPS. The design aims at memory coherence, power efficiency and high throughput, though programming it proved hard and IBM supplied a Linux-based software development kit to help.
How it came about
Sony, Toshiba and IBM set up the STI Design Center in Austin, Texas in March 2001. More than 400 engineers worked on the project over four years, with IBM drawing on eleven of its design centres, and Sony reported a budget of about US$400 million. Early patents sketched four Power Processing Elements each with eight Synergistic Processing Elements for a theoretical teraFLOPS, but the manufactured part used one PPE with eight SPEs. Production began at 90 nm, moved to 65 nm in March 2007 and to 45 nm in February 2008. IBM stopped work on higher-core variants in late 2009 while still supporting existing products.
Inside the chip
The chip has four parts: external input and output, the Power Processing Element, eight Synergistic Processing Elements, and a circular high-bandwidth bus called the Element Interconnect Bus that links them. The PPE is a two-way simultaneous multithreaded PowerPC 2.02 core with a 23-stage pipeline, 32 KiB instruction and data caches and 512 KiB of level-2 cache. Each SPE is a dual-issue in-order processor with 256 KiB of local store, 128-bit registers and no branch prediction. SPEs reach memory only through direct memory access, moving blocks up to 16 KB, so the PPE must start and schedule them. Both use fixed-width 32-bit RISC instructions.
How it was made
The first Cell chips were fabricated on a 90 nm silicon on insulator process. IBM shifted production to 65 nm in March 2007 and announced a 45 nm process in February 2008. The PlayStation 3 version carries 250 million transistors. Each die is built with eight SPEs and then tested; a faulty SPE is cut out by laser trimming, and one is always disabled so every console matches. The PowerXCell 8i rework dropped the Rambus interface for larger DDR2 paths, giving a bigger die and larger package.
Where it went
Sony put the Cell in its PlayStation 3 console from 2006 and in the Zego media computing server. Bandai Namco Entertainment used it in the Namco System 357 and 369 arcade boards. Mercury Computer Systems applied it to medical imaging, aerospace and seismic work, later shipping blades and PCI Express cards. IBM's QS20 blade reached 410 gigaFLOPS per module in single precision, and the QS22 with PowerXCell 8i chips powered Roadrunner, which held the top supercomputer spot until late 2009. Fixstars released a PowerXCell 8i PCI Express board in April 2008.
Versions and family
The PlayStation 3 part runs one PPE with seven active SPEs at 3.2 GHz, six of them open to developers and one kept for the console's operating system. Mercury used the full eight-SPE chip. IBM's PowerXCell 8i, announced in May 2008, was built at 65 nm, supported up to 32 GB of DDR2 memory and lifted SPE double-precision output from about 12.8 GFLOPS to 102.4 GFLOPS across eight SPEs. Roadrunner combined 12,240 PowerXCell 8i processors with 6,562 AMD Opterons. IBM also built the tri-core Xenon for the Xbox 360 from a modified PPE with VMX128 extensions.
Why it matters
Roadrunner made Cell part of the first system to sustain one petaFLOPS, and it stayed the fastest machine until late 2009. PowerXCell 8i systems held the top six places on the Green500 list for efficiency per watt. The chip reached millions of homes through the PlayStation 3 and spread into arcade boards, blade servers, accelerator cards and embedded systems. Its mix of a PowerPC controller with vector coprocessors linked by direct memory access influenced how designers thought about heterogeneous throughput processors.
Problems and reception
Cell delivered high peak throughput but demanded careful hand-tuned code, because each coprocessor works only from its own small local store and moves data by direct memory access. IBM responded with a Linux-based software development kit. The yield strategy of disabling one SPE, plus laser trimming of defective ones, drew attention as a way to save otherwise wasted silicon. A former IBM executive said the company had hoped Apple would move the Mac line to Cell before Apple switched to Intel.




Questions people ask about Cell Broadband Engine
What kind of chip is the Cell Broadband Engine?
It is a 64-bit RISC multi-core processor. One general-purpose PowerPC core, the Power Processing Element, controls several specialised coprocessors called Synergistic Processing Elements that handle vector and multimedia work at high throughput.
Who designed and built it?
Sony, Toshiba and IBM formed the STI alliance and opened a design centre in Austin, Texas in March 2001. More than 400 engineers worked on it over four years, with IBM contributing from eleven design centres and handling fabrication.
Why do PlayStation 3 chips have seven working coprocessors?
Each die is made with eight SPEs and tested. A defective one is disabled by laser trimming, and one is always switched off so all consoles behave the same. Of the seven left, six are available to games and one serves the operating system.
What is the PowerXCell 8i?
It is IBM's 2008 variant, built at 65 nm, adding support for up to 32 GB of DDR2 memory and much stronger double-precision floating point on the SPEs, reaching 102.4 GFLOPS across eight of them. It powered the Roadrunner supercomputer and the QS22 blade.
Why was Cell hard to program?
Each SPE works only from a 256 KiB local store and must fetch everything else by direct memory access, with no branch prediction hardware. Getting full speed meant careful hand-tuning, so IBM supplied a Linux-based software development kit.
Good reading and sources
- Cell (processor) on WikipediaEncyclopedia
- More photos on Wikimedia CommonsPhotos
- Wikidata recordOpen data
The facts on this page come from the Wikipedia article "Cell (processor)", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like Cell Broadband Engine
All CPUs and microprocessors
🇺🇸 United StatesPowerPC 400
Embedded 32-bit RISC processor cores for diverse applicationsCPU · Power · 1994