
PowerPC 400
Embedded 32-bit RISC processor cores for diverse applications
The PowerPC 400 series comprises 32-bit embedded processor cores based on the Power ISA. Designed by IBM and later marketed by Applied Micro Circuits Corporation, these cores power devices ranging from network switches to supercomputers.
- First embedded PowerPC core launched in 1994
- Powers Blue Gene/L supercomputer
- Used in PlayStation 2 slim models
- Transistor count as low as 85,000
- Supports frequencies up to 2 GHz
What it is
The PowerPC 400 family consists of 32-bit reduced instruction set computing (RISC) processor cores. These cores adhere to the Power Instruction Set Architecture (ISA). They are designed for embedded systems, serving roles in microcontrollers, network appliances, and custom chips. IBM originally developed the architecture, with Applied Micro Circuits Corporation acquiring certain assets in 2004. The cores are notable for their versatility, appearing in devices as small as printers and as large as supercomputers.
How it came about
IBM introduced the first member, the PowerPC 403, in 1994. It targeted the embedded market specifically, lacking features like a memory management unit found in desktop processors. Subsequent variants addressed different needs. The PowerPC 401 arrived in 1996 as a low-cost, low-power option. The PowerPC 405 followed in 1998 for system-on-chip designs. In 2004, Applied Micro Circuits Corporation purchased relevant assets from IBM for $227 million. IBM continued to evolve the cores and offer licensing services.
Inside the chip
The family includes several distinct core designs. The PowerPC 401 uses a simple three-stage pipeline with minimal cache. The PowerPC 405 features a five-stage pipeline and supports speeds over 400 MHz. The PowerPC 440 introduced out-of-order execution and a seven-stage pipeline. Later cores like the PowerPC 460 added digital signal processing instructions. The PowerPC 476FP supports simultaneous multithreading and has a nine-stage pipeline. Most cores use the CoreConnect bus for internal communication within a chip.
How it was made
Manufacturing processes vary across the family and over time. Early cores used older process nodes. The BRE440 radiation-hardened chip used a 150 nm process. The PowerPC 464-H90 utilized a 90 nm process. The PowerPC 476FP was fabricated using a 45 nm process. IBM manufactured many of these cores, while other foundries like Chartered and Samsung produced licensed versions. Transistor counts range from 85,000 in the PowerPC 401 to significantly higher numbers in later multi-core designs.
Where it went
These processors appear in a wide array of products. The PowerPC 403 powered early TiVo units and network switches. The PowerPC 405 is found in digital cameras, modems, and the PlayStation 2 slim model. Supercomputers like Blue Gene/L and Cray XT series use PowerPC 440 cores for processing and communication. Networking equipment from companies like LSI and Zultys also incorporates these cores. They serve in storage controllers, set-top boxes, and military-grade security chips.
Versions and family
The family includes the 401, 403, 405, 440, 450, 460, and 470 series. The PowerPC 450 powers the Blue Gene/P supercomputer. The PowerPC 460 series includes the 460SX and 460GT for high-end networking. Applied Micro Circuits Corporation rebranded some 405-based chips as APM801xx. Xilinx embeds PowerPC 405 and 440 cores in their Virtex FPGA lines. The PowerPC 476FP supports up to 16 cores in symmetric multiprocessing configurations.
Why it matters
The PowerPC 400 cores enabled high-performance embedded computing in constrained environments. Their use in Blue Gene/L helped achieve top rankings in supercomputing lists during the mid-2000s. The availability of synthesizable cores allowed integration into field-programmable gate arrays. This flexibility supported custom solutions for telecommunications and storage. The architecture demonstrated that RISC designs could scale from low-power sensors to massive parallel processing systems.


Questions people ask about PowerPC 400
What is the PowerPC 400 family?
It is a series of 32-bit embedded processor cores based on the Power ISA. They are designed for use in specialized applications like network appliances, microcontrollers, and supercomputers.
Who designed these processors?
IBM originally designed the PowerPC 400 cores. Applied Micro Circuits Corporation acquired assets related to the family in 2004 and continues to market some variants.
Where are these chips used?
They are found in diverse devices including printers, set-top boxes, network switches, and supercomputers like Blue Gene/L. They also appear in FPGAs and storage controllers.
Good reading and sources
The facts on this page come from the Wikipedia article "PowerPC 400", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like PowerPC 400
All CPUs and microprocessors
🇳🇱 NetherlandsQorIQ
NXP communications microprocessor brand for networking infrastructureCPU · Arm · 2008
🇺🇸 United StatesIBM A2
Open source 64-bit Power ISA processor core for embedded systemsCPU · Power · 2010
More from IBM
All of them
🇺🇸 United StatesCyrix 5x86
High-performance x86 CPU for legacy Socket 3 systemsCPU · x86 · 1995