MC14500B
One-bit CMOS microprocessor for industrial control logic
Motorola designed this one-bit microprocessor in 1977 for simple control tasks. It replaced relay systems using ladder logic and remained in production until at least 1995.
- Processes data one bit at a time
- Contains roughly 500 transistors
- Runs at 1 MHz on 5 V supply
- Designed for ladder logic control
- Remained in production until 1995
What it is
The MC14500B is a one-bit microprocessor created by Motorola for industrial control applications. Launched in 1977, it processes data one bit at a time rather than in bytes or words. This design makes it ideal for implementing ladder logic, a programming method used in programmable logic controllers. The chip helps replace complex relay systems in machinery. It operates with very low power consumption and requires external components for program counting.
How it came about
Vern Gregory conceived the Industrial Control Unit while working in Motorola’s marketing and applications group in Phoenix during the mid-1970s. Brian Dellande developed the circuit designs and co-wrote the manual. Ray DiSilvestro served as the bench technician, with Terry Malarkey providing management support. The physical chip design was executed by Phil Smith in the CMOS Logic Division in Austin. Mike Hadley supported product applications. The device entered the market in 1977 and stayed in production through 1995.
Inside the chip
This processor handles only one bit of data per cycle. It supports sixteen specific commands and typically runs at a frequency of 1 MHz. Unlike standard microprocessors, it lacks an internal program counter or subroutine stack. An external chip must provide the program counter, driven by a clock signal. This separation means memory size depends on the external implementation. The architecture shares similarities with the DEC PDP-14 computer. Its simplicity allows for direct serial data manipulation and efficient control logic.
How it was made
Motorola manufactured the MC14500B using CMOS technology. The integrated circuit contains approximately 500 transistors. It comes in a 16-pin dual in-line package. At launch, the chip cost $7.58 in quantities of 100 units. It operates on a 5 V supply drawing just 5 μA. For higher performance, users can increase the voltage to 15 V, which allows speeds up to 4 MHz. A clone called βP14500 was later made by I.P.R.S. Băneasa using IIL technology instead of CMOS.
Where it went
Engineers used this chip to replace relay banks in industrial settings. It is well-suited for programmable logic controllers. A custom automotive chip for Nippon Denso incorporated a version of this design. In education, the WDR 1-bit computer used the processor with 512 bits of RAM, LEDs, and a keyboard. Modern hobbyists build the PLC14500-Nano, an open-source hardware project based on this architecture, to learn about early computing designs.
Versions and family
The primary model is the MC14500B. A derivative design served as an embedded controller within a custom chip Motorola produced for Nippon Denso in Japan. I.P.R.S. Băneasa created a clone designated βP14500, which used IIL technology rather than the original CMOS process. No direct successor from Motorola is listed in the records, though the design influenced later embedded control solutions.
Why it matters
The MC14500B provided a cost-effective solution for industrial automation before powerful microcontrollers became common. Its ability to handle ladder logic directly simplified the transition from electromechanical relays to electronic control. The chip remained in production for nearly two decades, indicating steady demand in niche control markets. It also serves as an educational tool for understanding bit-level processing and simple computer architecture.
Questions people ask about MC14500B
What makes the MC14500B different from standard microprocessors?
It processes only one bit of data at a time and lacks an internal program counter. External chips must handle program counting and memory addressing, making it simpler but dependent on surrounding circuitry.
What was the primary use case for this chip?
It was designed for industrial control applications, specifically to implement ladder logic. This allowed it to replace complex relay systems and function as a simple programmable logic controller.
How fast does the MC14500B operate?
It normally runs at 1 MHz with a 5 V supply. If higher performance is needed, increasing the voltage to 15 V allows it to reach speeds of up to 4 MHz.
Good reading and sources
- Motorola MC14500 on WikipediaEncyclopedia
- More photos on Wikimedia CommonsPhotos
- Wikidata recordOpen data
The facts on this page come from the Wikipedia article "Motorola MC14500", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like MC14500B
All microcontrollersMore from Motorola
All of them
🇺🇸 United StatesMotorola 6847
Simple video chip for 1980s home computersGPU · Other · 1978
🇺🇸 United StatesMotorola 68000
A 16/32-bit CISC microprocessor introduced by Motorola in 1979CPU · 68k · 1979