Essex SX 200
4-bit single-chip microcontroller with on-board ROM, RAM and display drivers
The SX 200 was a single-chip 4-bit microcontroller that Essex International announced in February 1976. It packed a CPU, 1,024 bytes of ROM and 64 nibbles of RAM into one 28-pin package, and although public sales ended after a year it kept serving OEM buyers into the 1980s.
- Announced February 1976 by Essex International
- CPU, 1,024-byte ROM and 64 nibbles of RAM on one die
- 41 instructions, each finishing in a 20 μsec cycle
- 24 of 28 package pins used for input and output
- PMOS device running on 10 to 18.5 V at about 25 mA
What it is
A self-contained 4-bit controller built for industrial jobs such as driving numeric displays and keypads. Essex International, a business better known for wire and cable, revealed it in February 1976. One chip held the processor, a 1,024-byte program store and 64 small memory cells, so a designer needed very few other parts. Press interest followed, but the company pulled the part from open sale within a year while still building it for OEM customers through the 1980s. It belongs to a group of display-oriented controllers of that era, alongside devices such as the American Microsystems S2000.
How it came about
Essex International sat inside the wire and cable industry rather than the chip business, so the SX 200 was an unusual venture for the firm. Trade press picked up the announcement of February 1976, and Microcomputer Digest covered it that month. Marketing never took hold, and public offering stopped the following year. Direct sales to equipment makers continued well into the 1980s, keeping the design alive long after its brief moment in the spotlight.
Inside the chip
Everything ran from a customer-written program held in a 1,024-byte ROM with 8-bit words. Scratch space came from 64 SRAM cells of 4 bits each. A 4-bit arithmetic logic unit fetched each instruction and worked through an accumulator plus an index register aimed at the RAM. Outcome flags landed in a 16-bit status register, which a customer-programmed PLA then decoded to drive the output pins. The 41-instruction set covered branches, constants, bit work, register moves and I/O, and every instruction took one 20 μsec cycle, giving 50,000 instructions per second. Binary-coded decimal support simplified numeric display driving.
How it was made
Production used a PMOS process. The device needed a supply between 10 and 18.5 V while drawing roughly 25 mA. Housing was a 28-pin dual in-line package, and 24 of those pins served I/O duties. A four-line port handled a capacitive keypad of up to 16 keys, an eight-line port split into 4-bit output and 4-bit input or ran as one 7-bit output, and a 12-line port normally drove a display. The clock came from on-chip circuitry.
Where it went
Industrial controllers and similar equipment were the intended home. Typical jobs involved reading a keypad and refreshing a seven-segment numeric display, which is why such parts were often called display controllers at the time. Because the program and PLA settings came from the buyer, each customer could tailor the chip to a particular machine. Trade writing of the period grouped these devices with calculator-style chipsets because of that display focus.
Versions and family
No named siblings, predecessors or successors appear in the record. The closest comparison is the American Microsystems S2000, a separate design in the same specialised display-controller class rather than a family member.
Why it matters
The SX 200 showed that a firm outside the semiconductor field could assemble a complete controller on one die. Its commercial reach stayed modest, yet the part kept shipping to OEM customers for years after public sale ended. It also illustrates the mid-1970s trend of packing CPU, memory and display logic together for appliance-like control tasks.
Problems and reception
Coverage in Microcomputer Digest and later directories such as EDN's 1977 microprocessor survey gave the part visibility. Commercial results were weaker: Essex could not build a market and withdrew the device from general sale within a year. No defects or recalls are recorded.
Questions people ask about Essex SX 200
What kind of chip is the SX 200?
It is a single-chip 4-bit microcontroller aimed at industrial control work. Processor, program memory and scratch memory all sit inside one 28-pin package, along with ports meant for a keypad and a numeric display.
Who built it?
Essex International, a company mainly known for wire and cable, produced it through its Wire Assembly Division. The firm is today part of Superior Essex.
How fast was it?
Every instruction completed in a 20 μsec cycle, which works out to 50,000 instructions per second. The infobox lists a 400 kHz figure for the part.
How was the program supplied?
Buyers wrote their own code and had it burned into the on-chip 1,024-byte ROM. They also supplied settings for a programmable logic array that decoded status bits into output pin activity.
Why did it disappear from open sale?
Essex struggled to market the device and stopped offering it publicly the year after launch. Production continued for OEM customers well into the 1980s.
Good reading and sources
The facts on this page come from the Wikipedia article "Essex SX 200", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.