
Microbolometer
Uncooled infrared sensor for thermal imaging cameras
A microbolometer is an uncooled thermal sensor used in thermal cameras to detect infrared radiation. Developed by Honeywell in the late 1970s and declassified in 1992, it measures resistance changes in heated pixels to create temperature images without bulky cooling systems.
- Does not require bulky cooling systems like liquid nitrogen
- Developed by Honeywell in the late 1970s for the US DoD
- Vanadium oxide holds 70% of the global market share
- Pixel sizes shrunk from 45 μm to 6 μm by 2025
- Provides immediate video output upon powering on
What it is
A microbolometer is a specific type of bolometer that acts as a detector in thermal cameras. It senses infrared radiation with wavelengths between 7.5 and 14 micrometres. When this radiation strikes the detector material, it heats up and changes its electrical resistance. This change is measured and converted into temperature data to form an image. Unlike older infrared equipment, these sensors do not require complex cooling systems like liquid nitrogen or Stirling cycle coolers. This makes them smaller, lighter, and cheaper to operate while providing immediate video output upon powering on.
How it came about
Honeywell originally developed microbolometer technology in the late 1970s under a classified contract for the US Department of Defense. The technology remained secret until the US Government declassified it in 1992. Following declassification, Honeywell licensed the technology to several other manufacturers. This shift allowed the technology to move from exclusive military use to broader commercial and industrial applications, enabling the production of more affordable thermal imaging devices.
Inside the chip
The device consists of an array of pixels, each built from several layers. A silicon substrate supports a readout integrated circuit (ROIC). Above this, a reflector redirects light back into the absorbing material to strengthen the signal. A sacrificial layer creates a gap, thermally isolating the absorbing material from the ROIC. This bridge-like structure hangs about 2 micrometres above the circuit. Common detecting materials include amorphous silicon and vanadium oxide. These materials are chosen for their temperature coefficient of resistance and low noise levels. The entire array is encapsulated under a vacuum to ensure longevity.
How it was made
Manufacturers use various procedures, often integrating with CMOS fabrication processes. Amorphous silicon allows for low deposition temperatures below 200 degrees Celsius, making it stable and easy to produce. Vanadium oxide requires higher temperatures and post-annealing but holds a larger market share. Pixel sizes have decreased from 45 micrometres in older devices to 6 micrometres in 2025 models. Smaller pixels increase resolution but can reduce sensitivity due to higher noise. The final device is sealed in a vacuum, sometimes without breaking the vacuum during the entire fabrication process.
Where it went
These sensors are found in thermal imaging cameras for defence, consumer electronics, and medical applications. Their small size and low power consumption allow them to be mounted on helmets or handheld devices. They provide real-time video immediately after power-on, unlike cooled detectors which need time to cool down. Recent developments suggest potential for medical uses, such as detecting signals on the body surface. Defence sectors favour vanadium oxide based cameras for their stability and reliability in field conditions.
Versions and family
Common array sizes include 320x240 pixels and the less expensive 160x120 pixels. Newer high-resolution devices offer 640x480 or 1024x768 pixels. Two main material types dominate: vanadium oxide, which holds 70 per cent of the market, and amorphous silicon with 13 per cent. Research continues into other materials like graphene-infused layers to improve sensitivity at terahertz frequencies. Active microbolometers using thin film transistors were tested but had not reached commercial use by 2004.
Why it matters
The declassification of microbolometer technology in 1992 transformed thermal imaging from a specialised military tool into a widely available commercial product. By removing the need for bulky and expensive cooling systems, it enabled the creation of lightweight, portable thermal cameras. This advancement has influenced industries ranging from defence to healthcare. The reduction in pixel size over decades has steadily improved image resolution, making thermal data more accessible and detailed for various professional and consumer applications.

Questions people ask about Microbolometer
Why do microbolometers not need cooling?
They use a thermally isolated bridge structure that suspends the detecting material above the readout circuit. This design allows the material to heat up from infrared radiation without losing heat to the underlying electronics, eliminating the need for external coolers.
What materials are used to detect infrared light?
The two most common materials are amorphous silicon and vanadium oxide. Amorphous silicon is easier to integrate into standard chip manufacturing, while vanadium oxide offers higher market prevalence and stability for defence applications.
How has the resolution of these sensors improved?
Resolution has increased as individual pixel dimensions have shrunk. Older devices had pixels of 45 micrometres, while modern ones from 2025 feature pixels as small as 6 micrometres, allowing for arrays with up to 1024x768 pixels.
Good reading and sources
The facts on this page come from the Wikipedia article "Microbolometer", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like Microbolometer
All image and other sensors
🇺🇸 United StatesDigital micromirror device
MEMS chip of tiny tilting mirrors that forms images in DLP projectorsSensor · Other · 1990