General Instrument CP1600
A 16-bit microprocessor from 1975, best known inside the Intellivision console
The CP1600 is a 16-bit microprocessor built by General Instrument with Honeywell and introduced in February 1975, among the earliest single-chip 16-bit processors. Its slower CP1610 variant powered the Intellivision games console, and over three million of those machines were made before production ended in the mid-1980s.
- Introduced February 1975 as one of the first single-chip 16-bit microprocessors
- Design closely resembles the PDP-11, with eight 16-bit registers
- CP1610 variant powered the Intellivision console
- Over 3 million Intellivisions produced between 1980 and 1984
- Production ended in 1985 with the spin-off of Microchip Technology
What it is
The CP1600 is a 16-bit microprocessor introduced in February 1975 through a partnership between General Instrument and Honeywell. It ranks among the first single-chip 16-bit processors, and its overall design closely resembles the PDP-11 minicomputer. Honeywell placed it in process control computers, while its best-known appearance is the CP1610 variant inside the Intellivision video game console. The chip works on 16-bit words rather than bytes, addressing 64K words of memory. It shipped with 87 basic instructions and a set of companion I/O chips. General Instrument ended production in 1985 when it spun off its microelectronics division as Microchip Technology.
How it came about
General Instrument and Honeywell developed the CP1600 together, and it reached the market in February 1975. Honeywell used it in process control computers and related systems. Outside that, take-up stayed small because General Instrument only pursued very large orders and passed over smaller buyers. The company also never arranged a second source for the part, something most customers demanded in the early microprocessor years. Production stopped in 1985, when 32-bit designs such as the MC68000 had dulled interest in a 16-bit chip and the Intellivision line had already closed.
Inside the chip
The CP1600 works on 16-bit words and reaches 64K words of memory, with no byte addressing. Instructions are only 10 bits wide, with six spare bits reserved for future co-processors, so General Instrument sold matching 10-bit ROMs and an SDBD instruction that builds a 16-bit value from two ROM reads. Eight 16-bit registers follow the PDP-11 style: R0 is the main accumulator, R1 to R3 act as data pointers, R4 and R5 step themselves after use for looping, R6 is the stack pointer and R7 holds the program counter. The arithmetic unit is 8 bits wide. An unusual BEXT "external branch" instruction lets software poll up to 16 outside devices directly.
How it was made
The chip was built in enhancement mode nMOS and needed +12 V, +5 V and −3 V supplies, with TTL-level I/O apart from the clocks. Clock signals had to be produced by external circuitry: a 3.3 MHz two-phase clock gives a 600 ns microcycle, and 5 MHz gives 400 ns. To fit 16 bits through a 40-pin DIP, address and data share the same pins, so each transfer takes two bus cycles and latches must hold the address. Bus state is signalled by three pins, BDIR, BC1 and BC2.
Where it went
Honeywell fitted the CP1600 into process control computers. The CP1610 version, a slower member of the same family running near 2 MHz, went into game consoles including the Champion 2711 and, most famously, the Intellivision, where NTSC machines used a 1.7897725 MHz two-phase clock. More than three million Intellivisions were produced between 1980 and the shutdown of the lines in 1984 after the 1983 video game crash. General Instrument also sold the GIC1600, a standalone microcomputer system built around the chip, plus cross-assemblers and simulators for minicomputers.
Versions and family
The CP1610 is a compatible, slower family member, capped around 2 MHz against the 3 to 5 MHz of the CP1600. Early documents described two planned additions: the 1616 with an Extended Instruction Set, and the 1618 Priority Expander. A set of 164x support chips handled I/O, among them the 1641 keyboard controller, the 1643 cassette controller, the 1647 display control and the 1640 Programmable Interface Controller, a small channel processor with its own programs and direct memory access.
Why it matters
The CP1600 arrived as one of the first single-chip 16-bit processors and echoed the PDP-11 register model, but its commercial reach stayed narrow outside Honeywell and the Intellivision. That console carried the design to millions of homes, with over three million units built. The chip also left a legacy in its support parts: the 1640 Programmable Interface Controller, or PIC, outlived it, and after General Instrument became Microchip Technology in 1985 the PIC became that company's main product.
Problems and reception
Adoption was limited by General Instrument's habit of courting only very large customers and by its failure to secure a second source, which most buyers wanted at the time. Building a full system also demanded extra support chips and glue logic, including a multiplexer for the external branch signals and a converter for the bus status lines. By the mid-1980s, newer 32-bit parts such as the MC68000 had reduced interest in a 16-bit design.
Questions people ask about General Instrument CP1600
What is the CP1600?
It is a 16-bit microprocessor introduced in February 1975 by General Instrument in partnership with Honeywell. One of the first single-chip 16-bit processors, it works on 16-bit words and can address 64K words of memory. Its layout resembles the PDP-11, and a slower version called the CP1610 appeared in the Intellivision games console.
How does it differ from the CP1610?
The CP1610 is a compatible but slower member of the same family. While the CP1600 runs at 3 to 5 MHz, the CP1610 tops out around 2 MHz, and NTSC Intellivision consoles clock it at 1.7897725 MHz. Both share the same instruction set and register model.
Why are its instructions only 10 bits wide?
Of the 16 bits in an opcode, the CP1600 uses 10 and marks the rest for future use with co-processors. Storing those in ordinary byte-oriented ROM wasted six bits per instruction, so General Instrument made special 10-bit ROMs, plus an SDBD instruction that assembles a 16-bit value from two ROM reads.
What is the external branch feature?
The BEXT instruction leaves four low bits for the programmer, which appear as signals on pins EBCA0 to EBCA3 to pick one of up to 16 outside devices. The chosen device answers on EBCI: high means the branch is taken to its driver code, low means it is skipped, letting software poll devices without a normal interrupt sequence.
Why did the CP1600 not sell widely?
General Instrument targeted only very large orders and ignored smaller customers, and it never set up a second source, which most buyers required in the early microprocessor market. Beyond Honeywell and the Intellivision, few designs used it, and production stopped in 1985.
Good reading and sources
The facts on this page come from the Wikipedia article "General Instrument CP1600", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like General Instrument CP1600
All CPUs and microprocessors
🇺🇸 United StatesMOS Technology 6502
Low-cost 8-bit microprocessor that powered the home computer revolutionCPU · Other · 1975
🇺🇸 United StatesZilog Z80
An 8-bit microprocessor that powered early personal computers and game consoles.CPU · Other · 1976