News
EveryChip
Conduction band profile of a photoconductive QWIP. The conduction band profile is tilted as a bias voltage is applied.

Quantum well infrared photodetector

Infrared sensor using quantum wells for detection

The QWIP is a semiconductor detector that uses gallium arsenide quantum wells to sense infrared light. Developed from the mid-1980s, it offers uniform performance and stability for thermal imaging in space and military applications.

Share on WhatsApp

  • Uses gallium arsenide quantum wells for infrared detection
  • First used in space on NASA Landsat satellite in 2013
  • Corrugated design improved bandwidth by five times
  • Detects infrared radiation from 3 to 20 micrometers
  • Known for high pixel-to-pixel uniformity and stability

What it is

A quantum well infrared photodetector, or QWIP, is a type of semiconductor sensor designed to detect infrared radiation. It operates by using electronic transitions within quantum wells, which are thin layers of material that confine electrons. These devices are typically constructed from gallium arsenide, a compound common in high-speed electronics. The structure allows the detector to be tuned to specific infrared wavelengths, ranging from 3 to 20 micrometers. This technology is valued for its high uniformity across pixels and stable operation, making it suitable for precise thermal imaging tasks where consistency is critical.

How it came about

Research into this technology began in 1985 when strong intersubband transitions were observed in multiple quantum wells. By 1987, scientists had established the basic principles for sensitive infrared detection using this method. Improvements in 1990 reduced tunneling current by thickening barriers, leading to the formal naming of the device. The first infrared image was captured in 1991. Later, in 2002, a voltage-tunable two-color version was created for remote temperature sensing. To overcome low quantum efficiency issues, the corrugated QWIP was developed in 2008, using micromirrors to improve light absorption. This variant was first used in space in 2013 on a NASA satellite.

Inside the chip

The core of the device consists of 20 to 50 quantum wells separated by barriers. These wells are doped so that their ground states are filled with electrons. The barriers are wide enough to prevent electrons from tunneling between wells without energy input. When infrared light hits the detector, photons excite electrons from the ground state to a higher energy level. If the photon energy matches the gap between states, the electron escapes into the continuum. An applied electric field then extracts these electrons, creating a measurable photocurrent.

How it was made

These detectors are primarily manufactured using gallium arsenide. This material choice makes them a more affordable alternative to other infrared sensors, such as those based on mercury cadmium telluride. The production process involves creating precise layers of quantum wells and barriers. This structural adjustment helps overcome the limitation of one-dimensional quantization, allowing for better light absorption and wider bandwidths without requiring complex reflection gratings.

Quantum well infrared
A drawing made by EveryChip from what this page says. It is a diagram, not a picture of the real chip.

Where it went

The technology serves both civilian and military purposes. In 2013, NASA launched the Landsat Data Continuity Mission satellite, which carried a Thermal Infrared Sensor instrument. This instrument used three corrugated QWIPs to monitor Earth's water and land usage by detecting long-wavelength emissions. The U.S. Army also adopted the technology for helicopter systems, valuing its lower maintenance needs and calibration requirements. The sensors provide thermal imaging capabilities that help track temperature changes and object presence in various environments, leveraging their high pixel operability.

Versions and family

The standard QWIP has evolved into specialized forms. The voltage-tunable two-color QWIP, developed in 2002, can switch detection wavelengths between 7.5 and 8.8 micrometers by changing the bias voltage. The corrugated QWIP, or C-QWIP, introduced in 2008, addresses efficiency limits by using micromirrors. This design allows light to be reflected effectively onto the quantum wells, resulting in a bandwidth five times wider than earlier commercial versions. These variants demonstrate how structural changes can enhance performance for specific applications like remote sensing.

Why it matters

QWIPs have enabled more accessible infrared detection due to the use of gallium arsenide. Their stability and uniformity make them reliable for large-format arrays. The successful deployment in space marked a significant milestone, proving their viability for orbital remote sensing. By offering a cost-effective solution with less need for frequent calibration, they have influenced the design of thermal imaging systems for both defense and environmental monitoring. The ability to tailor energy levels for specific infrared regions adds to their versatility in scientific instruments.

Problems and reception

Initially, the U.S. military found the early versions insufficient due to low quantum efficiency, which stood at only 5 percent. The industry struggled with producing large-format reflection gratings to fix this issue. However, the development of the corrugated design mitigated these concerns by improving light redirection. Tests showed that this new structure provided wider bandwidths and maintained resolution, leading to broader acceptance for practical applications.

Questions people ask about Quantum well infrared photodetector

What material is used to make QWIPs?

Quantum well infrared photodetectors are typically made of gallium arsenide. This material is also commonly found in smartphones and high-speed communications equipment, making the sensors relatively affordable to produce compared to other infrared technologies.

How does a QWIP detect infrared light?

It uses electronic intersubband transitions in quantum wells. When infrared photons hit the detector, they excite electrons from a ground state to a higher energy level. These electrons then escape and are measured as an electrical current, indicating the presence of infrared radiation.

Why was the corrugated QWIP developed?

Standard QWIPs had low quantum efficiency because they could only detect light traveling parallel to the material layers. The corrugated version uses micromirrors and inclined sidewalls to redirect light, improving absorption and increasing the detection bandwidth significantly.

Good reading and sources

Where this page comes from

The facts on this page come from the Wikipedia article "Quantum well infrared photodetector", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.

It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.

Photo credits on this page

The small pictures above come from Wikimedia Commons under free licences. Some are cropped to fit.

The weekly digest

Every Monday: the chip of the day, new pages on EveryChip, and the conferences and anniversaries of the week ahead.