Cachecam
Sample verification camera for the Perseverance Mars rover
The Cachecam is a 20 megapixel colour image sensor built into NASA's Perseverance rover. It photographs sealed sample tubes on Mars to confirm successful collection before storage.
- Uses a 20 megapixel CMOS colour detector
- Mounted inside the Perseverance rover underbelly
- Verifies sample acquisition before tube sealing
- Classified as an engineering camera by JPL
What it is
The Cachecam is a specialised photographic instrument mounted on the underside of the Perseverance rover. Operated by the Jet Propulsion Laboratory, this device serves as an engineering camera rather than a scientific imager for public release. Its primary function is to capture high resolution colour photographs of sample tubes immediately after they are filled with Martian rock or soil. This visual confirmation ensures that the acquisition process was successful before the tube is permanently sealed for potential future return to Earth. The system uses a 20 megapixel CMOS detector to achieve the necessary clarity for verification tasks.
Inside the chip
This imaging system relies on a 20 megapixel CMOS detector, a type of active pixel sensor commonly used in digital photography. The chip captures colour images, allowing engineers to distinguish materials and verify the presence of samples within the tubes. As an engineering camera, it is grouped with other utility sensors on the rover, such as the navigation cameras and hazard avoidance cameras. The design prioritises reliability and specific task execution over broad scientific surveying, focusing entirely on the sample caching mechanism located at the top of the rover's underbelly storage area.
Where it went
The Cachecam operates exclusively within the Mars 2020 mission framework as part of the Perseverance rover. It is positioned inside the rover body, specifically above the sample cache assembly. Its operational use is triggered during the sample collection sequence. After the robotic arm deposits material into a tube, the camera takes a picture to document the contents. This data is critical for ground controllers to decide whether to seal the tube or attempt another collection. It may also capture images at other stages of the internal sample handling process.
Questions people ask about Cachecam
What is the main purpose of the Cachecam?
The Cachecam photographs the top of sample tubes after they are filled. This allows engineers to verify that a sample was successfully acquired before the tube is sealed for storage on the Mars surface.
What type of sensor does the Cachecam use?
It uses a 20 megapixel CMOS detector. This type of image sensor captures colour images, providing the detail needed to confirm the presence and nature of the collected Martian samples.
Where is the Cachecam located on the rover?
The camera is mounted inside the underbelly of the Perseverance rover. It sits at the top of the sample cache system, allowing it to look down at the tubes during the collection process.
Good reading and sources
The facts on this page come from the Wikipedia article "Cachecam", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like Cachecam
All image and other sensors
WorldHazcam
Wide-angle engineering cameras for rover navigationSensor