RTX 2010
Radiation-hardened 16-bit stack processor for real-time space work
RTX 2010 is a hardened member of the RTX family, a 16-bit stack machine built to run Forth directly in real-time jobs. Harris Semiconductor derived it from Chuck Moore's Novix design and shipped the line from 1988; Intersil makes it now, and versions of it have flown on many spacecraft.
- 16-bit stack machine with no programmer-visible general registers
- Two on-chip stacks, each 256 words deep
- Interrupt latency of four processor cycles
- Built on silicon on sapphire for radiation tolerance
- Flown on ACE, NEAR/Shoemaker, TIMED and Philae
What it is
RTX 2010 belongs to a line of 16-bit processors organised as stack machines, meaning they work from a last-in, first-out pile of values rather than a bank of named registers. The design targets real-time control and is written in Forth, a language whose structure matches the hardware closely. Harris Semiconductor launched the family in 1988 after taking over Chuck Moore's Novix work, and Intersil produces it today. The 2010 variant adds hardened construction plus fuller input/output, timers and floating-point support, which is why it appears in spacecraft rather than desktop computers.
How it came about
Chuck Moore, who created Forth, built a processor for the language as a gate array in 1983 and set up Novix to commercialise it. The resulting NC4000 reached customers in June 1985 and was soon called the NC4016. Harris Semiconductor acquired the line, reworked it, and released the RTX 2000 in 1988 under the name "Real Time eXpress". A 32-bit relative, the RTX 4000, was shown in 1989 but never entered volume production.
Inside the chip
The chip keeps no general-purpose registers visible to the programmer. Instructions address values by their position on a stack, so a plain ADD pulls the top two entries, combines them and pushes the answer back. That lets most opcodes fit in a single byte. The RTX 2000 carries two stacks, each holding 256 words, and can issue several instructions at once through separate buses, hiding waits for main memory. Calls cost one cycle and returns cost none. Interrupt latency stays at four cycles, which suits control loops. On-chip stacks, timers, counters, an interrupt controller and a hardware multiplier cut trips to external memory.
How it was made
These parts were built mainly on a silicon on sapphire line, a process that suits radiation-heavy environments. The original Novix device packed about 4,000 gates from 16,000 CMOS transistors, far fewer than the 68,000 gates of the 1979 Motorola 68000. Harris added cache, program memory and arithmetic hardware when it reworked the design. The RTX 2010 runs at 8 MHz and handles 8-bit and 16-bit data with a 20-bit address path.
Where it went
Radiation-hardened RTX 2010 parts have flown on a range of scientific craft, among them the Advanced Composition Explorer, NEAR/Shoemaker, TIMED and the Philae lander carried by Rosetta. Their quick, predictable response to interrupts also suits general real-time control work.
Versions and family
The Novix NC4000, renamed NC4016, ran at 7.5 MHz and up to 10 MIPS. A faster NC5016 reached 10 MHz and 12 MIPS, while a planned NC6016 never shipped because the company closed. Harris then issued the RTX 2000, the RTX 2001 without the multiplier, and the RTX 2010 with input/output, timers and full floating-point support. The 32-bit RTX 4000 was announced in 1989 but stayed out of production.
Why it matters
By mapping instructions straight onto Forth ideas, the design produced very compact code and made context changes cheap, since switching tasks only means moving a stack pointer. Those traits kept the family relevant for decades in spacecraft and other interrupt-heavy control systems, and the hardened 2010 series continues that role under Intersil.
Questions people ask about RTX 2010
What is a stack machine?
It is a processor without named general-purpose registers. Values sit in a last-in, first-out stack, and instructions work on the entries at the top. Opcodes can therefore be short, and switching between tasks only requires changing the stack pointer.
Why is it tied to the Forth language?
Forth is itself built around two stacks, so Chuck Moore designed the hardware to execute the language's basic operations directly. The chip can run 40 Forth primitives and 123 combinations without a software layer in between.
Who makes the RTX 2010 today?
Intersil manufactures it. Harris Semiconductor originally created the RTX line after licensing the Novix design, and production later moved to Intersil.
Where has this chip been used?
Radiation-hardened RTX 2010 devices have been installed in several spacecraft, including the Advanced Composition Explorer, NEAR/Shoemaker, TIMED and the Philae lander from the Rosetta mission.
Good reading and sources
The facts on this page come from the Wikipedia article "Harris RTX 2000", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like RTX 2010
All CPUs and microprocessors
WorldIntersil 6100
A 12-bit CMOS microprocessor that runs the PDP-8 instruction set on one chipCPU · Other · 1975
More from Harris Semiconductor
All of them
🇺🇸 United StatesIntel 80286
16-bit x86 CPU with protected mode and 24-bit addressing, launched in 1982CPU · x86 · 1982