DEC J-11
Two-chip CMOS implementation of the PDP-11 ISA for high-end DEC machines
The J-11 is a microprocessor chipset that executes the PDP-11 instruction set architecture. Digital Equipment Corporation and Intersil designed it together to bring PDP-11/70-class performance and features down to a small number of chips, and it appeared in the PDP-11/73, PDP-11/83 and Professional 380.
- Joint design by Digital Equipment Corporation and Intersil
- Data path and control dies on one ceramic hybrid DIP
- Optional floating-point accelerator in a standard DIP
- Built to match PDP-11/70 performance in fewer chips
- Soviet clone produced as KN1831VM1
What it is
The J-11 is a chipset built to run the PDP-11 instruction set architecture, the family of 16-bit minicomputer designs from Digital Equipment Corporation. Digital worked on it with Intersil. Rather than filling a board with many parts, the pair packed the performance and feature set of the large PDP-11/70 into a couple of chips. It went into the PDP-11/73 and PDP-11/83 minicomputers and the Professional 380 desktop machine. A separate floating-point accelerator was available as an add-on.
How it came about
The goal was to shrink a whole high-end PDP-11 processor onto a small number of devices. Digital and Intersil shared the work. The layout was planned so that more than one control chip could sit in the system, which would have opened the door to extra instruction groups such as the Commercial Instruction Set. That extension never reached customers, because no additional control chip was ever sold.
Inside the chip
Two parts carry the processor: a data path chip and a control chip. Both sit in ceramic leadless packages mounted together on one ceramic hybrid dual inline package. The control side holds a control sequencer, which drives the order of operations, plus a microcode ROM, a small read-only memory holding the internal routines that decode each instruction. Buyers could add a floating-point accelerator chip for maths-heavy work, supplied in a normal dual inline package.
How it was made
Intersil produced the data path and control chips using a CMOS process, the low-power complementary metal-oxide-semiconductor style of fabrication. Digital built the floating-point accelerator itself in a process it called "ZMOS", an NMOS design. The two main dies were mounted on a ceramic hybrid substrate in leadless packages, and the whole assembly fitted a dual inline footprint.
Where it went
The chipset appeared in three Digital products. The PDP-11/73 and PDP-11/83 were minicomputers in the long-running PDP-11 line, and the Professional 380 was a desktop machine aimed at office use. All three relied on the J-11 to carry out PDP-11 programs.
Versions and family
A single floating-point accelerator chip could be paired with the base pair to speed up decimal and floating-point maths. Planned extra control chips for the Commercial Instruction Set were designed for but never shipped. A copy of the chipset was built in the Soviet Union and given the part number KN1831VM1.
Why it matters
By folding a high-end PDP-11 into a two-chip set, the J-11 let Digital put that architecture into smaller and cheaper systems than the PDP-11/70. It also carried the design abroad: a Soviet-made equivalent, KN1831VM1, shows the architecture being reproduced outside the United States.




Questions people ask about DEC J-11
What exactly is the J-11?
It is a microprocessor chipset that carries out the PDP-11 instruction set architecture. Digital Equipment Corporation and Intersil developed it together so that a high-end PDP-11 could be built from a small number of chips instead of a large board of parts.
Which computers used it?
Three Digital machines relied on the J-11: the PDP-11/73 and PDP-11/83 minicomputers, plus the Professional 380 desktop system. Each used the chipset as its main processor.
How was the chipset put together?
A data path chip and a control chip, each in a ceramic leadless package, were mounted on one ceramic hybrid dual inline package. The control chip contained a sequencer and a microcode ROM. An optional floating-point accelerator came in a standard DIP.
Who fabricated the parts?
Intersil made the data path and control chips in a CMOS process. Digital produced the floating-point accelerator in its own "ZMOS" NMOS process.
Were there other versions?
Extra control chips for the Commercial Instruction Set were planned but never sold. A Soviet copy of the chipset was manufactured under the name KN1831VM1.
Good reading and sources
The facts on this page come from the Wikipedia article "DEC J-11", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like DEC J-11
All CPUs and microprocessors
🇺🇸 United States74181
4-bit slice ALU, the first complete arithmetic logic unit on one chipCPU · Other · 1970