ICL8038
Voltage-controlled waveform generator chip by Intersil
The ICL8038 is an integrated circuit from Intersil that generates sine, square and triangular waves. It uses bipolar technology to produce frequencies from millihertz up to 100 kHz, serving as a versatile signal source before its discontinuation in 2002.
- Generates sine, square and triangular waveforms
- Frequency range from 1 mHz to 100 kHz
- Discontinued by Intersil in 2002
- Uses bipolar monolithic technology with Schottky diodes
- Temperature drift optimisable to under 250 ppm/°C
What it is
The ICL8038 is a specialised analog integrated circuit designed by Intersil. Its primary function is to generate three common types of electrical signals: sine waves, square waves and triangular waves. Built using bipolar monolithic technology that incorporates Schottky barrier diodes, this chip acts as a voltage-controlled oscillator. It allows engineers to create precise test signals for various electronic applications. The device was widely used in laboratories and embedded systems where stable waveform generation was required without complex external circuitry.
How it came about
Intersil developed the ICL8038 to provide a compact solution for signal generation. The design leveraged bipolar manufacturing techniques to integrate the necessary components onto a single silicon die. This approach simplified the creation of oscillators compared to discrete component builds. The chip remained in production for many years, becoming a standard part in analog electronics. However, Intersil eventually discontinued the component in 2002, ending its official manufacture and support.
Inside the chip
The core operation relies on charging and discharging a capacitor with constant currents to create triangular waves. These triangular signals are then passed through a non-linear network to approximate sine waves. Square waves are derived directly from the switching action. Users can set the output frequency using external resistors or by applying a control voltage. For higher precision, the temperature drift can be reduced to less than 250 parts per million per degree Celsius when combined with a phase-locked loop.
How it was made
The chip was fabricated using bipolar monolithic technology. This process integrates bipolar transistors and Schottky barrier diodes on a single substrate. While specific transistor counts and package types are not detailed in the available records, the use of Schottky diodes suggests a focus on speed and performance within the analog domain. The manufacturing was handled by Intersil until the product line was closed.
Where it went
This waveform generator found use in test equipment, audio synthesis and communication systems. Its ability to produce frequencies from one millihertz up to 100 kilohertz made it suitable for low-frequency applications. Some units could operate at speeds reaching 300 kilohertz. Engineers used it in function generators and educational kits. The voltage-controlled nature allowed for frequency modulation and sweeping applications in signal processing tasks.
Versions and family
Maxim Integrated created a compatible version called the MAX038. This copy offered similar functionality and pin compatibility. Both the original ICL8038 and the Maxim alternative have been discontinued. No direct successors from Intersil are listed in the provided material, leaving designers to seek modern alternatives or discrete solutions for similar waveform generation needs.
Why it matters
The ICL8038 established a benchmark for integrated waveform generation. It simplified the design of function generators and reduced the component count for analog signal sources. Its long production run indicates widespread adoption in the industry. The existence of a clone by Maxim highlights its significance and the demand for such a specific functional block in analog circuit design during its era.
Questions people ask about ICL8038
What types of waves does the ICL8038 produce?
The chip generates three main waveform types: sine waves, square waves and triangular waves. It creates triangular waves by charging a capacitor and converts them to sine waves using a non-linear network.
What is the frequency range of the ICL8038?
It operates as a voltage-controlled oscillator with a standard range from one millihertz to 100 kilohertz. Some specimens are capable of reaching frequencies up to 300 kilohertz.
Is the ICL8038 still available today?
No, Intersil discontinued the ICL8038 in 2002. A compatible version called the MAX038 was made by Maxim, but it has also been discontinued.
Good reading and sources
The facts on this page come from the Wikipedia article "Intersil ICL8038", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like ICL8038
All analog, power and mixed-signal
🇺🇸 United StatesLM3914
Analog display driver for LED bar graphs and dot metersAnalog
More from Intersil
All of them
WorldIntersil 6100
A 12-bit CMOS microprocessor that runs the PDP-8 instruction set on one chipCPU · Other · 1975