News
IndustryTSMC’s grip on advanced chipmaking will face competitionIndustryCadence joins European Chip Design Platform to support semiconductor startups and SMEsMaking chipsMarc Hijink on ASML’s Culture, Supply Chain, and GeopoliticsProcessorsIntel's post-Nova Lake CPUs take shape as Razor Lake desktop and laptop variants surfaceAI chipsHow Google’s New AI Chip Software Helps It Battle NvidiaIndiaMore IC Packaging Plants Emerge In IndiaIndustryUS Tightens China AI Chip Access as Nvidia, TSMC and Semiconductor Stocks SlideDesignAxelera AI moves into HPC with TitaniaMaking chipsChinese envoy says chip equipment export curbs threaten EU-China trade thawIndiaSEMICON India 2026 Day 2 Sees 25 MoUs, Strategic Collaborations Across Semiconductor Value ChainIndustryTSMC’s grip on advanced chipmaking will face competitionIndustryCadence joins European Chip Design Platform to support semiconductor startups and SMEsMaking chipsMarc Hijink on ASML’s Culture, Supply Chain, and GeopoliticsProcessorsIntel's post-Nova Lake CPUs take shape as Razor Lake desktop and laptop variants surfaceAI chipsHow Google’s New AI Chip Software Helps It Battle NvidiaIndiaMore IC Packaging Plants Emerge In IndiaIndustryUS Tightens China AI Chip Access as Nvidia, TSMC and Semiconductor Stocks SlideDesignAxelera AI moves into HPC with TitaniaMaking chipsChinese envoy says chip equipment export curbs threaten EU-China trade thawIndiaSEMICON India 2026 Day 2 Sees 25 MoUs, Strategic Collaborations Across Semiconductor Value Chain
EveryChip
TMS9900JL in ceramic package. The pins on this package were coated with 24 carat (100%) gold to prevent oxidation and ensure good electrical connections.

TMS9900

A 16-bit single-chip microprocessor from Texas Instruments, launched in 1976.

Photo: Konstantin Lanzet, CC BY-SA 3.0, via Wikimedia Commons

The TMS9900 was one of the first single-chip 16-bit microprocessors to reach the market, launched by Texas Instruments in June 1976. It packed the TI 990 minicomputer architecture onto one chip and powered TI's own low-end minicomputers and the TI-99/4A home computer.

Share on WhatsApp

  • One of the first single-chip 16-bit microprocessors, released June 1976
  • 16 general-purpose registers live in RAM, addressed by a Workspace Pointer
  • 64-pin DIP with unmultiplexed 15-bit address and 16-bit data buses
  • Powered the TI-99/4 and TI-99/4A, which sold about 2.8 million units
  • 69 word-aligned instructions, one to three words each

What it is

The TMS9900 is a 16-bit microprocessor built by Texas Instruments and released in June 1976. It was among the earliest single-chip 16-bit CPUs on sale, alongside the General Instrument CP1600. The design brought TI's TI 990 minicomputer architecture down to one chip, and TI first used it in cheaper models of that minicomputer line. It is a CISC design with big-endian byte ordering. Its register file lives in main memory rather than inside the CPU, a habit inherited from the minicomputer world. The chip appeared in TI's TI-99/4 and TI-99/4A home computers, which sold roughly 2.8 million units in total.

How it came about

TI built the TMS9900 as a one-chip edition of its TI 990 minicomputer family, in the same spirit as single-chip versions of the PDP-8 and Data General Nova. Earlier multi-chip 16-bit parts existed, but this was a self-contained CPU on one die. TI pushed one architecture across its divisions. In the late 1970s Walden C. Rhines showed the TMS99110, then code-named Alpha, to an IBM team working on a personal computer. IBM picked the Intel 8088 instead. One reason was the lack of a clear route past 64 KB of logical memory; the 9900 family needed page mapping to reach 16 MiB, while the 8088 used segments for 1 MB. TI also dropped plans for higher-end personal computers that would compete with its own minicomputers.

Inside the chip

The CPU holds just three internal 16-bit registers: the program counter, the status register, and the Workspace Pointer. That pointer names a spot in external RAM holding 16 general-purpose 16-bit registers, so a context switch means changing one value instead of saving a whole register set. The trade-off is slower register access. There is no stack pointer; branch instructions such as BL and BLWP save return state into workspace registers, and interrupts carry their own PC and WP pairs. The status register holds a 4-bit interrupt mask. The 69 instructions are one to three words long and word-aligned, with a fairly orthogonal set of addressing modes including immediate, symbolic, register, register indirect, indexed and PC-relative.

How it was made

The TMS9900 was built in an N-channel silicon gate MOS process. It needed three supply rails, +5 V, −5 V and +12 V, plus a four-phase non-overlapping clock topping out at 3 MHz, typically derived from a 48 MHz crystal through a TIM9904 clock generator chip. The shortest instructions take eight clock cycles, about 2.7 μs, while DIV can stretch to 124 cycles. It came in a 64-pin, 0.9 inch wide DIP. The pin count let the 15-bit word address bus and 16-bit data bus sit on dedicated pins with no multiplexing, which simplified external memory wiring.

TMS9900
A drawing made by EveryChip from what this page says. It is a diagram, not a picture of the real chip.

Where it went

TI put the chip into its TI-99/4 and TI-99/4A home computers. Cost cutting left those machines with only 256 bytes of fast RAM the CPU could reach directly; the other 16 KB of 8-bit DRAM sat behind the video display controller, which slowed things down badly. The TM990 series of plug-in CPU, memory and I/O cards formed 16-bit minicomputers for process control, and the TM990/189 served as a trainer board. John Walker and Dan Drake built S100-bus cards and a software stack around the TMS9900 in the late 1970s, work that fed into the founding of Autodesk. The TI Professional of 1983 used an Intel 8088 instead.

Versions and family

The TMS9995 came next, roughly three times faster thanks to instruction prefetch, and appeared in the Tomy Tutor, the Geneve 9640 card upgrade and the Powertran Cortex. It was planned for the TI-99/2 and TI-99/8, but both stayed at prototype stage. The later TMS99000 family, the TMS99105A and TMS99110A, served as the CPU of the 990/10A minicomputer. The two differ only in on-chip macrostore ROM: the 110A adds floating-point instructions. A third part, the TMS99120, was announced with Pascal support routines but may never have shipped. Smaller 40-pin parts included the TMS9940, TMS9980/81 and TMS9995, and the SBP9900 was a ruggedised build.

Why it matters

The 9900 architecture outlived the chip itself, running as the Communications Processor inside TI's TMS380 chipset for Token Ring networking and later Ethernet into the 1990s. The TI-99/4A sold about 2.8 million units, giving the design a wide home-computer audience even though outside design wins were scarce. The 64-pin package and the cost of the surrounding parts worked against it in small machines. By the mid-1980s the market had moved to the Intel 8086 and the Motorola 68000, and TI's semiconductor arm shifted to special-purpose 32-bit work such as the TMS320 and the TMS340 graphics processor.

Problems and reception

The chip found relatively few sockets outside TI's own products. Its 64-pin DIP pushed up system cost compared with the 40-pin parts rivals used, and the memory-mapped register file made register access slow in single-user microcomputers. The TI-99/4A's tiny 256-byte fast RAM, with the rest of memory reachable only through the video controller, held performance back. IBM passed on the design in favour of the 8088, partly over the 64 KB logical memory limit.

Questions people ask about TMS9900

What kind of chip is the TMS9900?

It is a 16-bit microprocessor from Texas Instruments, released in June 1976. It implements the TI 990 minicomputer architecture on a single chip and was among the earliest single-chip 16-bit CPUs sold, close in date to the General Instrument CP1600.

Why are its registers in memory?

The design keeps 16 general-purpose 16-bit registers in external RAM, pointed at by the Workspace Pointer. Switching context then means changing one register rather than saving the whole set, which suits multitasking. The cost is slower register access, which mattered less in minicomputers with fast memory.

What package did it use?

A 64-pin dual in-line package, 0.9 inches wide. The extra pins let the 15-bit address bus and 16-bit data bus sit on dedicated lines without multiplexing, which simplified memory connections but made the chip costlier to design into small machines than 40-pin rivals.

Which computers used it?

TI's TI-99/4 and TI-99/4A home computers used it, selling about 2.8 million units between them. It also appeared in the TM990 module series for process control, the TM990/189 trainer, and third-party S100-bus cards built by John Walker and Dan Drake.

What replaced it?

The TMS9995 followed, running about three times faster with instruction prefetch. The TMS99000 family, the TMS99105A and TMS99110A, came later and served as the CPU of the 990/10A minicomputer. TI then moved to the TMS320 and TMS340 special-purpose processors.

Good reading and sources

Where this page comes from

The facts on this page come from the Wikipedia article "TMS9900", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.

It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.

Photo credits on this page

The small pictures above come from Wikimedia Commons under free licences. Some are cropped to fit.

The weekly digest

Every Monday: the chip of the day, new pages on EveryChip, and the conferences and anniversaries of the week ahead.