
Electronic Arrays 9002
An 8-bit CPU with on-chip RAM, sold briefly in the mid-1970s.
The EA9002 was an 8-bit microprocessor that Electronic Arrays put on sale in 1976. It packed scratchpad memory and a small address space into a 28-pin package so a working controller could need only two chips. Manufacturing trouble and stronger rivals ended the line in 1977.
- 8-bit CPU released by Electronic Arrays in 1976
- 64 bytes of on-chip scratchpad RAM
- 12-bit address space, 4,096 bytes of external memory
- 28-pin DIP, versus 40 pins for the 6502 and Z80
- Line cancelled in November 1977; company bought by NEC
What it is
The EA9002 is an 8-bit microprocessor that Electronic Arrays began selling in 1976. It was built for small control jobs rather than general-purpose computers, with 64 bytes of on-chip RAM and a 12-bit address space that kept the pin count down. A 28-pin DIP package made board design cheaper than the 40-pin parts from MOS Technology and Zilog. Because the program usually lived in ROM and only a little data memory was needed, the chip could form a complete controller alongside a single ROM. Modern readers would call it a microcontroller, though the company used the word controller at the time.
How it came about
Electronic Arrays had built its business on calculator chipsets from 1970, but competitors kept shipping lower chip counts first. By the mid-1970s the firm needed a fresh product and started work on a CPU. The design targeted embedded roles such as calculators, cash registers and gas pumps, where programs sat in ROM and data memory was tiny. Static RAM was still costly, so a small scratchpad on the die saved board space. Depletion-load NMOS allowed direct connection to 5-volt TTL parts. Yields on the new process stayed poor through 1976, and the line was cancelled in November 1977. NEC bought the company the following year.
Inside the chip
The programming model offers 55 instructions, loosely based on the Intel 4040. Most are one-address operations whose opcode splits into five bits of function and three bits selecting a register. Arithmetic runs through a single 8-bit accumulator, with eight 8-bit registers for temporary values and eight 4-bit registers that extend them to 12 bits for indexing. A separate seven-level stack holds 12-bit return addresses, so subroutine calls do not touch the scratchpad. The ALU handles both binary and packed BCD arithmetic. One interrupt line is supported, with an enable instruction and a fixed entry address. Single-byte instructions take 2 microseconds and two-byte ones take 4 microseconds, at eight clocks per machine cycle.
How it was made
The part was fabricated on a depletion-load NMOS line owned by Electronic Arrays. That process ran at a single 5-volt supply, unlike older enhancement-load designs that needed several input voltages including +12V, which simplified both power supplies and TTL interfacing. Packaging was a 28-pin dual in-line package. No transistor count is recorded. Production never reached healthy yields, and the design was dropped before volumes grew.
Where it went
The chip was aimed at embedded control tasks: calculators, cash registers, gas pumps and similar equipment where a small program in ROM tracked quantities and totals. A minimal system needed the 9002 plus a ROM, with interface logic such as an Intel 8212 or a simple flip-flop. Pro-Log Corporation of Monterey, California built a single-board computer around it in early 1977. Electronic Arrays also supplied ROMs, static RAM and the EA2000 keyboard controller as companion parts, and offered an assembler and emulator running on an IBM System/360.
Versions and family
No family of derivatives appeared before the line ended. The chip sat between two very different contemporaries in concept: Adam Osborne described it as blending the scratchpad idea of the Fairchild F8 with the multiple general-purpose registers of the RCA COSMAC. Its nearest rivals in the market were the MOS 6502 and Zilog Z80, both in 40-pin packages. Osborne's second edition of An Introduction to Microcomputers dropped the chapter on this part after the cancellation.
Why it matters
The 9002 showed how far integration could go for small controllers: on-chip RAM, a compact address space and a small package could cut a design to two chips. Commercially it failed to win significant sockets, and the product line was cancelled in November 1977. Electronic Arrays, already in financial difficulty, was acquired by NEC the next year and later folded into NEC Electronics USA in 1981.
Problems and reception
Contemporary coverage treated the design as thoughtful for its target market, and Adam Osborne gave it a full chapter in the first edition of his microcomputer survey. The practical verdict was harsher: poor fabrication yields delayed deliveries while the 6502 and Z80 reached volume production, and no major design wins arrived. The chapter was removed from the second edition once the part had been cancelled.
Questions people ask about Electronic Arrays 9002
What kind of chip is the EA9002?
It is an 8-bit microprocessor from 1976 with built-in RAM and a small address space. Electronic Arrays designed it for control duties in equipment such as calculators and gas pumps. By later terminology it is closer to a microcontroller than a general-purpose CPU.
Why did it use a 28-pin package?
A 12-bit address space needed fewer pins than the 16-bit buses of rivals, so the part fitted in a 28-pin DIP. That reduced board cost compared with 40-pin designs like the MOS 6502 and Zilog Z80, and the trade-off was a 4,096-byte external memory limit.
What memory did it include?
The die carried 64 bytes of scratchpad RAM, enough for small tasks such as tracking gallons pumped and running totals. External memory could be addressed up to 4,096 bytes, and a seven-level stack of 12-bit addresses handled subroutine returns separately.
How fast was it?
The normal clock was 4 MHz. A single-byte instruction took 2 microseconds to fetch and execute, while a two-byte instruction took 4 microseconds. Each machine cycle consumed eight clocks.
What happened to the product?
Yields on the new depletion-load NMOS line stayed poor, and by 1977 the 6502 and Z80 dominated. Electronic Arrays cancelled the design in November 1977 and was bought by NEC the following year.
Good reading and sources
- Electronic Arrays 9002 on WikipediaEncyclopedia
- More photos on Wikimedia CommonsPhotos
- Wikidata recordOpen data
The facts on this page come from the Wikipedia article "Electronic Arrays 9002", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like Electronic Arrays 9002
All CPUs and microprocessors
🇯🇵 JapanNEC μCOM series
NEC microprocessor and microcontroller family from the 1970s and 1980sCPU · x86 · 1973
More from Electronic Arrays
All of them
🇺🇸 United StatesZilog Z80
An 8-bit microprocessor that powered early personal computers and game consoles.CPU · Other · 1976