TL431
Adjustable shunt voltage regulator introduced in 1977
The TL431 is a three-terminal adjustable shunt voltage regulator developed by Texas Instruments in 1977. It serves as the industry standard error amplifier for switched-mode power supplies and regulates voltages from 2.495 V to 36 V.
- Regulates voltages from 2.495 V to 36 V
- Handles cathode-anode currents up to 100 mA
- Introduced by Texas Instruments in 1977
- Standard error amplifier for SMPS feedback loops
- Uses a 1.2 V Widlar bandgap internal reference
What it is
The TL431 is a precise three-terminal integrated circuit that functions as an adjustable shunt voltage regulator. Texas Instruments launched this component in 1977. It maintains stable output voltages between 2.495 V and 36 V while handling currents up to 100 mA. The device acts as a de facto standard error amplifier in switched-mode power supplies that use optocouplers for isolation. Engineers value it for replacing expensive temperature-compensated zener diodes in linear regulator circuits.
How it came about
Texas Instruments introduced the TL431 in 1977 to provide a cost-effective alternative to high-priced zener diodes. The design aimed to offer precise voltage regulation with better thermal stability. Over the decades, it became a ubiquitous component in power electronics. Many other manufacturers later produced clones and derivatives, such as the KA431 and LM431, ensuring its continued availability and standardisation across the industry throughout the twenty-first century.
Inside the chip
Internally, the chip resembles an npn bipolar transistor with a fixed 2.495 V switching threshold. It uses a 1.2 V Widlar bandgap reference rather than a physical 2.495 V source, allowing operation down to 2.0 V. An open-loop operational amplifier compares the input control voltage against this reference. The output stage features an open collector transistor capable of sinking 100 mA. A compensation capacitor creates a dominant pole, resulting in a unity gain frequency near 1 MHz. The device lacks internal protection against excessive current or overheating.
How it was made
Texas Instruments originally manufactured the TL431. While specific process nodes are not detailed in the provided text, the original design remains in production alongside numerous variants. These clones may differ in die size, layout, and precision characteristics. Manufacturers produce these functionally similar circuits using various semiconductor processes, leading to differences in minimal operating currents and safe operating areas among the many available versions from different suppliers.
Where it went
This regulator is essential in switched-mode power supplies for laptops and chargers, where it drives optocoupler LEDs to provide feedback. It also serves in linear regulators, either as a fixed zener-like reference or with external dividers for higher voltages. Engineers use it in voltage comparators and window monitors. Some applications exploit its undocumented behaviour to create voltage-controlled oscillators or astable multivibrators, though these modes carry risks of instability or damage.
Versions and family
Many companies produce clones like the TLV431, TL432, ATL431, KA431, LM431, TS431, and 142ЕН19. These derivatives often vary in die size, speed, and precision. For instance, some Vishay versions exhibit unusually high DC voltage gain that rolls off at low frequencies. Low-voltage alternatives like the TLV431 address logic level compatibility issues. While functionally similar, these chips are not always interchangeable in undocumented modes due to differences in internal structure and stability margins.
Why it matters
The TL431 established itself as the industry standard for error amplification in isolated power supplies. Its adoption simplified the design of efficient switched-mode regulators by providing a reliable and precise reference. The widespread availability of clones has kept costs low and ensured supply chain resilience. Its longevity demonstrates the effectiveness of its bandgap reference design, which continues to influence analog circuit education and practical power electronics engineering decades after its introduction.
Problems and reception
Texas Instruments later acknowledged that early stability charts were overly optimistic. Designers found that capacitive loads between 1 nF and 10 μF could cause oscillation, particularly at low currents. Robust designs now require series resistance to increase equivalent series resistance and suppress phase lag. Users must carefully manage load capacitance and current levels to avoid instability during power-on transients, as the device can behave unpredictably outside its specified high transconductance mode.




Questions people ask about TL431
What is the primary function of the TL431?
It is a three-terminal adjustable shunt voltage regulator. It maintains a stable output voltage between 2.495 V and 36 V by sinking current from the cathode to the anode based on a reference input voltage.
Why is the TL431 common in power supplies?
It serves as the industry standard error amplifier for switched-mode power supplies. It works with optocouplers to provide isolated feedback, regulating the output voltage efficiently in devices like laptop chargers.
Can the TL431 drive large loads directly?
No, it can only sink up to 100 mA. For higher currents, engineers combine it with external power transistors or MOSFETs to create series regulators that handle greater power while maintaining precise voltage control.
Is the TL431 stable with any capacitor?
No. It is stable with capacitive loads below 1 nF or above 10 μF. Loads between these values may cause oscillation. Adding a series resistor helps stabilise the circuit by increasing the effective series resistance.
Good reading and sources
The facts on this page come from the Wikipedia article "TL431", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like TL431
All analog, power and mixed-signal
🇺🇸 United States7400 series
Standardised transistor-transistor logic integrated circuits for digital electronics.Analog · 1964
🇺🇸 United StatesIntel 8231/8232
Early single-chip floating-point coprocessors for microcomputers.Analog · Other · 1977
More from Texas Instruments
All of them
🇺🇸 United StatesTexas Instruments LPC Speech Chips
Digital signal processors for speech synthesis in toys and arcades.DSP · Other · 1978