Titan
Cancelled 32-bit Power ISA microprocessor core by AMCC
Titan was a planned family of 32-bit microprocessor cores based on the Power ISA. Designed by Applied Micro Circuits Corporation, it aimed for high performance and low power using Fast14 technology. The project was cancelled in 2010 in favour of the PowerPC 400 core.
- Planned 32-bit Power ISA microprocessor core
- Targeted 2 GHz speed with 2.5 W per core
- Used TSMC 90 nm bulk CMOS process
- Project cancelled in 2010 for PowerPC 400
- First sample APM 83290 shipped in Oct 2009
What it is
Titan was a proposed family of 32-bit microprocessor cores developed by Applied Micro Circuits Corporation (AMCC). It relied on the Power ISA architecture and targeted embedded systems and system-on-chip solutions. The design prioritised energy efficiency alongside high clock speeds, aiming to reach 2 GHz while consuming only 2.5 watts per core. Although initial samples were produced, the entire product line was abandoned in 2010.
How it came about
AMCC initiated the Titan project to create a high-performance yet power-efficient core for embedded applications. The company leveraged Fast14 technology from Intrinsity to achieve this balance without expensive manufacturing processes. Development progressed to the point where the first implementation, codenamed Gemini, began sampling in October 2009. Despite this progress, AMCC decided to scrap the Titan family in 2010. The firm chose to focus its resources on continuing the development of the existing PowerPC 400 core instead.
Inside the chip
The core featured a superscalar, out-of-order execution pipeline with eight to nine stages. It employed a unique three-level cache hierarchy. Tiny 4 KiB instruction and data caches sat at level zero, preceding standard 32 KiB L1 caches. A shared L2 cache of up to 1 MB served all cores. The design supported single, dual, and quad-core configurations. It complied with Power ISA version 2.04. By using NMOS transistors and eliminating latches, the architecture reduced transistor count and cost compared to traditional designs.
How it was made
The chips were manufactured using TSMC’s 90 nm bulk CMOS process. This choice helped keep production costs low while maintaining performance. The use of Fast14 technology allowed the design to achieve high speeds without requiring more advanced or expensive nodes. The physical design resulted in fewer transistors than conventional approaches, further aiding cost reduction. Dual-core system-on-chip implementations were designed to consume less than 15 watts in total.
Where it went
The primary target markets were telecommunications and control plane applications. The first implementation, the APM 83290 or Gemini, included features such as a floating-point unit, DDR2 memory controller, and security engine. It also integrated multi-channel DMA and input/output engines for gigabit Ethernet, PCIe, USB, RapidIO, and SATA interfaces. These features made it suitable for complex embedded networking tasks requiring efficient data handling.
Versions and family
Plans existed for single, dual, and quad-core versions of the Titan core. The only known implementation to reach sampling was the APM 83290, codenamed Gemini. This variant featured two cores running at 1.5 GHz with a 512 kB shared L2 cache. No other variants were released before the project cancellation. The PowerPC 400 core effectively succeeded the Titan line within AMCC’s product portfolio after the decision to halt development.
Why it matters
Titan demonstrated the potential of combining high performance with low power consumption in embedded PowerPC designs. Its use of Fast14 technology highlighted alternative methods for achieving efficiency without shrinking process nodes aggressively. However, its cancellation meant these specific architectural innovations did not reach mass market adoption under the Titan brand. The project remains a notable example of proposed high-efficiency cores from the late 2000s.
Questions people ask about Titan
What was the Titan processor?
Titan was a planned family of 32-bit microprocessor cores based on the Power ISA. It was designed by Applied Micro Circuits Corporation for embedded systems and network applications, focusing on high performance and low power usage.
Why was the Titan project cancelled?
Applied Micro Circuits Corporation scrapped the Titan family in 2010. The company decided to stop development and instead continue working on its existing PowerPC 400 core, which used a 40 nm fabrication process.
How power efficient was the Titan core?
The design was highly efficient, drawing just 2.5 watts per core while reaching speeds up to 2 GHz. Dual-core system-on-chip implementations were expected to consume less than 15 watts in total operation.
Good reading and sources
The facts on this page come from the Wikipedia article "Titan (processor)", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like Titan
All CPUs and microprocessors
🇳🇱 NetherlandsQorIQ
NXP communications microprocessor brand for networking infrastructureCPU · Arm · 2008
🇺🇸 United StatesPWRficient
Power-efficient PowerPC microprocessor series by P.A. SemiCPU · Power · 2007
🇺🇸 United StatesPowerPC e6500
Multithreaded 64-bit Power ISA microprocessor core by FreescaleCPU · Power · 2012
More from Applied Micro Circuits Corporation
All of them
🇺🇸 United StatesPowerPC 400
Embedded 32-bit RISC processor cores for diverse applicationsCPU · Power · 1994