Pentium Pro
Intel's first sixth-generation x86 CPU, built for servers and workstations
The Pentium Pro is a sixth-generation x86 microprocessor that Intel introduced on 1 November 1995 and built until 1998. It was the first Intel chip to use the P6 microarchitecture and the first x86 processor with out-of-order execution and an on-package L2 cache, and it powered servers, workstations and the ASCI Red supercomputer.
- Introduced 1 November 1995 as Intel's first sixth-generation x86 chip
- 5.5 million transistors, versus 3.1 million in the original Pentium
- First x86 CPU with out-of-order execution and register renaming
- On-package L2 cache of 256 KB to 1 MB on its own back-side bus
- Powered ASCI Red, first system above one teraFLOPS and TOP500 leader 1997-2000
What it is
The Pentium Pro is a single-core x86 microprocessor that Intel designed and manufactured. It reached the market on 1 November 1995 and stayed in production until 1998, with clock speeds of 150, 166, 180 and 200 MHz on a 60 or 66 MHz front-side bus. It was the second Intel part to carry the Pentium name and the first to run the P6 microarchitecture, also called i686. Intel aimed it at servers and workstations, and it could be arranged in dual- and quad-processor systems. Its 5.5 million transistors, on-package L2 cache and out-of-order engine set it apart from the original Pentium.
How it came about
Fred Pollack led the design. He had worked on superscalar techniques and was previously lead engineer on the Intel iAPX 432. The chip was meant to replace the original Pentium across the whole product range, but its cost and its weakness on 16-bit code pushed it into a narrower server and high-end desktop role. Advanced Logic Research shipped the first system, the Revolution Quad6, in April 1996. Intel built no mobile version because of heat and power draw, though Imperial Computer sold a portable, the 6200TLP.
Inside the chip
P6 uses a decoupled 14-stage pipeline with an instruction pool. Three decoders turn x86 instructions into 118-bit micro-ops, which are RISC-like operations carrying an operation, two sources and a destination. Only one decoder handles complex instructions; the other two handle simple ones. Micro-ops pass through a re-order buffer and a reservation station, then up to five per cycle reach six execution units: two integer, one floating-point, a load unit, and store address and store data units. The chip executes instructions out of order and speculatively, renaming registers to find parallel work. A 36-bit address bus with Physical Address Extension reaches 64 GB of memory. It was the first x86 part with upgradeable microcode under BIOS or OS control.
How it was made
Intel fabricated the processor die and its cache die separately and bonded them in one package. The 150 MHz die used a 0.50 µm BiCMOS process; the 166, 180 and 200 MHz dies used 0.35 µm. The 256 KB cache die was 0.50 µm, while the 512 KB and 1024 KB cache dies were 0.35 µm. The processor carried 5.5 million transistors. Because the dies were joined before testing, one flaw on either die scrapped the whole assembly, which held down yield and kept prices high. The chip used the large rectangular Socket 8.
Where it went
Servers and workstations were the main home, often in symmetric multiprocessing setups with two or four chips. The most famous deployment was ASCI Red in 1996, which paired two Pentium Pro CPUs on each computing node. It was the first computer past one teraFLOPS and led the TOP500 list from 1997 to 2000. Advanced Logic Research's Revolution Quad6 was the first shipping system. A fully 32-bit operating system such as Windows NT, Linux, Unix or OS/2 was needed to get the best from the design.
Versions and family
Speeds ranged from 150 to 200 MHz, with L2 cache from 256 KB at launch up to 1 MB in 1997. A 133 MHz prototype was built but never sold. Users often overclocked the 200 MHz part to 233 MHz, the 180 MHz part to 200 MHz, and the 150 MHz part to 166 MHz. The chip followed the Pentium P54CS and was succeeded by the Pentium II and the Pentium II Xeon in 1998, both derived from P6. Intel's family/model code is 6/1 and the product code is 80521.
Why it matters
P6 shaped Intel processors for over a decade. The pipeline scaled from 150 MHz up to 1.4 GHz in the Tualatin Pentium III, and its ideas carried on in the Banias core of Pentium M and Intel Core (Yonah), then into the Core microarchitecture of 2006. Its on-package cache with a dedicated back-side bus, called dual independent bus by Intel, removed a long-standing bottleneck and let the CPU read memory and cache at once. The design also introduced conditional move instructions to the Intel line.
Problems and reception
Reviewers found writes to video memory very slow, in some tests about 10% of an equally clocked Pentium. Workarounds such as FASTVID and write combining helped, and Windows video drivers began setting MTRRs automatically from 1997. The chip handled 16-bit and mixed code poorly because partial registers flushed the pipeline, which hurt it under MS-DOS, Windows 3.1x and Windows 95, and sales among PC buyers were weak. It also lacked MMX. A floating-point flaw, the flag erratum, appeared in some float-to-integer conversions but was judged minor.



Questions people ask about Pentium Pro
What made the Pentium Pro different from the original Pentium?
It introduced the P6 microarchitecture, with a 14-stage pipeline that decodes x86 instructions into micro-ops and executes them out of order. It also placed the L2 cache inside the package on a dedicated bus, and it carried 5.5 million transistors against the Pentium's 3.1 million.
Why did it sell poorly to ordinary PC buyers?
Systems were expensive, and the design ran 16-bit and mixed 16/32-bit code badly because partial registers often flushed the pipeline. The common operating systems of the day, MS-DOS, Windows 3.1x and Windows 95, contained much 16-bit code. A fully 32-bit system such as Windows NT or Linux suited it far better.
What was the floating-point bug?
Known as the flag erratum, it appeared in some floating-point to integer conversions when the value would not fit the smaller integer format, making the FPU deviate from documented behaviour. Intel and others considered it minor, and very few programs were thought to be affected.
How was the cache arranged?
The L2 cache sat on its own die or dies in the same package, linked to the processor by a full-speed back-side bus Intel called dual independent bus. It ran at core speed, was non-blocking with up to four requests in flight, and ranged from 256 KB to 1 MB.
What came after it?
The Pentium II and Pentium II Xeon replaced it in 1998, both built on the same P6 foundation. The architecture then scaled to 1.4 GHz in the Tualatin Pentium III and continued through Banias and the Core microarchitecture.
Good reading and sources
- Support for Intel® ProcessorsIntel, Article
- Intel Offers Its Pentium Pro For Work Station Market (Published 1995)The New York Times, Article
- ASCI Red: Sandia National LaboratoryTOP500, Article
The facts on this page come from the Wikipedia article "Pentium Pro", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like Pentium Pro
All CPUs and microprocessorsMore from Intel
All of them
WorldIntel 80386EX
Embedded variant of the 386 with on-chip peripherals, launched in 1994CPU · x86 · 1994