Mostek MK5065
Early 8-bit PMOS microprocessor from Mostek, aimed at control tasks
The MK5065 is an 8-bit microprocessor that Mostek put on sale in February 1974. Motorola designed it for an Olivetti calculator, then licensed it to Mostek for other jobs. Fast interrupt handling and a wait mode for direct memory access made it suited to control work, but it saw little use before the Fairchild F8 took its place.
- Released February 1974 by Mostek
- Three register sets switch interrupt levels in one cycle
- WAIT pin supports direct memory access
- 51 instructions, 81 opcodes, 15-bit addresses up to 32 kB
- 40-pin DIP, PMOS, three supply rails
What it is
The MK5065 is an 8-bit microprocessor that Mostek released in February 1974. Motorola had created the design for an Olivetti desktop calculator, then licensed it to Mostek for use outside calculators. It handles interrupts quickly by keeping three register sets, and it supports direct memory access through a wait signal. Sold at $58 in lots of 100, it found few designs. Fairchild's F8 arrived around the same time with a more modern NMOS build, and Mostek dropped the 5065 from its 1975 catalogue in favour of the F8-based MK3850.
How it came about
Motorola's Rod Orgill and Bill Mensch led the work on a custom PMOS processor for an Olivetti calculator. Motorola's own fabs could not build it, so the design went to Mostek on condition that it stay out of the calculator market. Mostek shipped its version in February 1974 and reached volume output by early 1975. Fairchild's F8, itself begun as a calculator part for Olympia-Werke, arrived in September 1974 and outclassed it. Mostek licensed the F8 in June 1975 and moved it onto its new NMOS line, and the 5065 vanished from that year's catalogue. Motorola, still wanting its own processor, started the 6800 right after the licensing deal.
Inside the chip
Three register sets, called levels, hold the accumulator, program counter, main link register and carry flag. An interrupt finishes the current instruction, then switches to the matching level, so no user code has to save state. INT 1 and INT 2 pins can each be enabled in software; level 3 is normal running. The same trick speeds subroutine calls, with the first 256 memory locations acting as a stack for up to 128 16-bit addresses. A WAIT pin lets an outside device pause the CPU for DMA. There are 51 instructions and 81 opcodes, mostly two bytes long. Direct addresses reach 256 bytes; indirect ones chain through 15-bit pointers covering 32 kB. I/O uses dedicated instructions with a four-cycle handshake over H and L buses.
How it was made
The part was built on the PMOS process typical of the early 1970s, so it needs three supply rails: -12V, +5V and -5V. It sits in a 40-pin DIP, and the multiplexed bus leaves five pins unused. Address and data share 16 pins, split into high and low 8-bit halves, so each memory access takes two cycles. An external clock chip, the MK5009, is required. Transistor count is not given.
Where it went
Mostek paired the processor with GEMS-8, a two-board evaluation system standing for General Evaluation Microprocessor System. That kit carried the clock driver, 512 bytes of ROM, between 1 and 12 kB of RAM and a UART for a terminal. The ROM held the Program Aid Routine, a small development and debug tool. The processor board with the PAR ROM cost $597, the 12k RAM card another $597, or $995 for both. A cross assembler ran on an unnamed 16-bit minicomputer. Beyond this kit, the chip appears to have seen little use.
Versions and family
Mostek's own follow-up was not a 5065 derivative but the MK3850, its version of the Fairchild F8, which the company licensed in June 1975 and brought up on a new NMOS line. By 1976 Mostek had cut that part to $10 in plastic. Motorola, drawing lessons from the 5065, went on to design the 6800. A peripheral interface adaptor was planned for late 1975.
Why it matters
The 5065 mattered more as a stepping stone than as a seller. Its register-level interrupt scheme showed how to service inputs without slow save-and-restore code, an idea that suits control work in cash registers or pumps. Its fate also pushed two bigger stories: Mostek's move to the F8, and Motorola's start on the 6800. The chip itself left the catalogue within about a year.
Problems and reception
Even at $58 per hundred, the part drew little interest. The Fairchild F8, aimed at the same jobs, was easier to build around and, being NMOS, could be made with smaller features, cheaper and faster. Mostek's 1975 book lists only the F8 version, the MK3850. No clock speed appears in surviving references, though instruction times run 3 to 16 μsec and a 1 MHz clock can be used.
Questions people ask about Mostek MK5065
Who designed the MK5065?
Motorola designed it, with Rod Orgill and Bill Mensch leading the effort, for an Olivetti desktop calculator. Motorola's fabs could not produce it, so the design was licensed to Mostek, which released its version in February 1974 for use outside calculators.
How does it handle interrupts so quickly?
It keeps three separate register sets, called levels, each holding the accumulator, program counter, main link register and carry flag. When an interrupt arrives, the chip finishes the current instruction and switches to the matching level, so no user code has to save the state by hand.
How much memory can it use?
Addresses are 15 bits wide, giving room for up to 32 kB. Direct addressing reaches only 256 bytes near the current instruction or in the zero page, so wider access needs indirect addressing, which can chain through pointers whose top bit marks them as indirect.
Why did it disappear so fast?
Fairchild's F8 arrived at about the same time for the same jobs and was easier to build systems around. Being NMOS, it could be made with smaller features, which cut cost and raised speed. Mostek licensed the F8 in June 1975 and its 1975 catalogue lists only the MK3850.
What did you need to run one?
Three supply rails (-12V, +5V and -5V), an external clock chip, the MK5009, and a 40-pin DIP socket. Mostek also sold GEMS-8, a two-board evaluation system with ROM, RAM and a UART, plus a cross assembler for a 16-bit minicomputer.
Good reading and sources
The facts on this page come from the Wikipedia article "Mostek 5065", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like Mostek MK5065
All CPUs and microprocessors
WorldIntersil 6100
A 12-bit CMOS microprocessor that runs the PDP-8 instruction set on one chipCPU · Other · 1975