Intel 4040
Intel's second 4-bit microprocessor, a 1974 upgrade of the 4004
The Intel 4040 is a 4-bit microprocessor that Intel introduced in 1974 as the follow-up to the 4004. Built on a 10 µm silicon-gate PMOS process with 3,000 transistors, it added interrupts, a stop mode and a second ROM bank to the original design, and stayed in production until 1981.
- Second 4-bit microprocessor from Intel, introduced in 1974
- 3,000 transistors on a 10 µm silicon-gate PMOS process
- 60 instructions, up from the 4004's 46
- Interrupts added, with a 7-entry stack and a second register bank
- 24-pin DIP, eight pins more than the 16-pin 4004
What it is
The Intel 4040 is a 4-bit microprocessor, the second one Intel designed and made. It arrived in 1974 as the successor to the 4004 and ran at 500 to 740 kHz, handling roughly 62,000 instructions each second. The chip works on binary-coded decimal data, the number format calculators used, and carries 3,000 transistors on a 10 µm silicon-gate PMOS process. What set it apart from its predecessor was practicality: interrupts for real-time work, a stop mode for debugging, and access to twice as much program memory. Intel kept it in production until 1981.
How it came about
Federico Faggin put forward the project, defined the architecture and led the design effort. Tom Innes carried out the detailed design work. The original masks also show his initials alongside two further sets, JO and EL, belonging to designers who have not been identified. The 4004 had been built for an electronic calculator, and its lack of interrupts was seen as a serious gap for real-time uses. The 4040 closed that gap and reached machines in early 1975.
Inside the chip
The processor keeps the 4004's 4-bit data bus, arithmetic logic unit and overall speed. Its 24-pin package adds eight pins over the 16-pin original. Two carry interrupt request and acknowledge signals, and the pushdown stack grew from three entries to seven so return addresses can be saved. Eight extra index registers form a second bank; a single instruction swaps banks during an interrupt, so the handler works on fresh registers while the old values stay untouched. A stop input halts the chip in a low-power state and allows single-stepping. A second ROM select line doubles program space to 8 KB. Fourteen instructions were added, including logical AND and OR, for 60 in total.
How it was made
Intel fabricated the 4040 itself using a 10 µm process with silicon gate enhancement-load PMOS logic. The die held 3,000 transistors. It was housed in a 24-pin dual in-line package, and parts were sold in white ceramic (C4040), ceramic (D4040) and plastic (P4040) forms. The supply voltage was −15 V DC.
Where it went
Intel's own Intellec 4 Mod 40 development system, released in early 1975, was the first microcomputer built around the chip. Byte magazine named the Micro 440 from Comp-Sultants of Huntsville, Alabama, as the first third-party machine using the 4040, appearing in late 1975. A family of support chips surrounded it, including static RAM, ROM and EPROM parts, clock generation, parallel bus drivers, and programmable keyboard, display and I/O controllers. The 4265 and 4269 programmable parts reached sample quantities in March 1976.
Versions and family
The chip was sold in several package styles, including the white ceramic C4040, the ceramic D4040 and the plastic P4040. It sits between the Intel 4004, which it expanded, and the Intel 8080, which followed it. Support devices included the 4101 static RAM, 4316 and 4308 ROMs, 4702 EPROM, 4289 memory interface and the 4265 and 4269 programmable controllers.
Why it matters
The 4040 turned the calculator-oriented 4004 into a part that could handle real-time control, mainly by adding interrupts and a register bank swap that cut interrupt handling to a single instruction. Its stop mode made single-step debugging practical. The MCS-40 family around it, with RAM, ROM, EPROM and interface chips, gave designers a complete small system. Intel produced the processor from 1974 through 1981.
Problems and reception
The 4004's missing interrupt support was widely regarded as a major oversight, and the 4040 was Intel's answer to it. Beyond that, the design drew praise for making debugging easier through single-step operation. The processor is now listed as unsupported.



Questions people ask about Intel 4040
How does the 4040 differ from the 4004?
Performance, bus layout and the arithmetic logic unit are the same. The 4040 adds eight package pins, which bring interrupts, a halt and stop facility, and a second ROM bank. Its instruction set grows to 60 commands and its register file and stack are enlarged to suit the new features.
What do the interrupts do?
One input pin requests an interrupt and an output pin confirms it is being handled. Because saving state is slow on this design, eight extra registers form a second bank. A single instruction swaps banks, so the handler uses fresh registers and the original values are left alone until the swap back.
How much memory could it address?
Program code came from ROM. A second ROM select pin raised the ROM address from 12 to 13 bits, giving 8 KB across two banks. The two lines acted as chip selects rather than a binary code, so only two banks were possible. RAM addressing was effectively 10-bit or 8-bit with bank select.
How fast was it?
The main clock ran from 500 to 740 kHz in two overlapping phases, producing 62,500 to 92,500 machine cycles per second. Each instruction took one or two cycles, averaging about 62,000 instructions per second at 740 kHz. Adding two 8-digit BCD numbers took roughly 850 µs.
Good reading and sources
The facts on this page come from the Wikipedia article "Intel 4040", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like Intel 4040
All CPUs and microprocessors
WorldIntersil 6100
A 12-bit CMOS microprocessor that runs the PDP-8 instruction set on one chipCPU · Other · 1975
WorldMOS 6507
A low-cost 8-bit 6502 variant in a 28-pin package with an 8 KB address rangeCPU · Other · 1975
More from Intel
All of them
🇺🇸 United StatesIntel 8080
An 8-bit microprocessor released in 1974 that launched the personal computer era.CPU · x86 · 1974