Timna
Cancelled Intel CPU with integrated graphics and memory controller
Timna was a proposed x86 microprocessor family designed by Intel in Haifa, Israel. Announced in 1999, it aimed to integrate graphics and a memory controller but was cancelled in 2000 due to memory interface defects.
- Cancelled by Intel on September 29, 2000
- Designed in Haifa, Israel
- First Intel CPU with integrated GPU and RAM controller
- Used 180 nm manufacturing process
- Clock speeds ranged from 600 MHz to 700 MHz
What it is
Timna was a central processing unit project developed by Intel. It represented an early attempt to combine a CPU core with a graphics processing unit and a memory controller on a single die. The design team was based in Haifa, Israel, and the chip was named after the Timna Valley. Although announced in 1999, the product never reached the market. It was intended for personal computers and relied on specific memory technologies that ultimately contributed to its cancellation.
How it came about
Intel announced the Timna project in 1999. The development team in Haifa aimed to create a cost-effective processor by integrating key components. A major hurdle arose with the memory interface. Intel expected Rambus Dynamic Random Access Memory (RDRAM) prices to fall, but they remained high. To address this, engineers adapted a Memory Translator Hub from the Intel 820 chipset to support cheaper SDRAM. However, serious defects were found in this hub design, leading to motherboard recalls. Despite efforts to fix the issue, problems persisted, and Intel cancelled Timna on September 29, 2000.
Inside the chip
The processor was built on a P6 derived microarchitecture. It featured an integrated graphics unit codenamed Capitola, which was based on the i752 and i754 designs used in earlier chipsets. The CPU was designed to operate with clock speeds between 600 MHz and 700 MHz. It utilized a 133 MHz front-side bus for data transfer. On-chip memory included 128 KB of Level 2 cache. The integration of the memory controller was a key architectural feature, intended to simplify motherboard design and reduce costs.
How it was made
Intel planned to manufacture Timna using a 180 nanometre process node. This fabrication technology was standard for the era. The chip was designed to work with RDRAM initially, but the design was modified to include a Memory Translator Hub for SDRAM compatibility. This hub was sourced from the Intel 820 chipset design. The manufacturing and design flaws associated with this hub component were central to the project's failure. No physical units were shipped to consumers.
Where it went
Timna was intended for use in personal computers. Its integrated graphics and memory controller were meant to lower the total cost of PC systems. By combining these functions, Intel hoped to offer a competitive solution for mainstream computing. The cancellation meant that these features did not appear in Intel products at that time. Later Intel processors would eventually integrate similar functions, but Timna itself saw no commercial deployment.
Versions and family
No variants of Timna were released. The project was cancelled before any siblings or successors could launch. The graphics component, codenamed Capitola, was based on existing i752 and i754 units. The cancellation of Timna left a gap in Intel's low-cost strategy at the time. The knowledge gained from the P6 derived architecture in Haifa later influenced the Banias mobile CPU project.
Why it matters
Although Timna failed, it had a lasting influence on Intel's design processes. The Haifa team's experience with the P6 architecture and integrated components proved valuable. This expertise heavily influenced the subsequent Banias project, which became a successful line of mobile processors. Timna serves as a historical example of the risks involved in integrating new memory technologies and complex subsystems onto a single chip.
Problems and reception
The project faced significant technical challenges, particularly with the Memory Translator Hub. Defects in this component forced recalls of motherboards using the Intel 820 chipset. These issues damaged confidence in the design approach. The cancellation was announced in late 2000, marking the end of the programme. It is often cited as a forgotten technology that preceded later successful integration efforts.
Questions people ask about Timna
What was the Intel Timna processor?
Timna was a proposed x86 CPU family by Intel, announced in 1999. It was designed to integrate a graphics processing unit and a memory controller on a single chip. The project was cancelled in 2000 before reaching the market.
Why was the Timna project cancelled?
The project was cancelled due to issues with memory support. High RDRAM prices led to the use of a Memory Translator Hub for SDRAM, which had serious design defects. These defects caused motherboard recalls and could not be fully resolved.
Where was the Timna chip designed?
The Timna processor was designed by Intel's team in Haifa, Israel. It was named after the Timna Valley in Israel. The work done there later influenced the design of the Banias mobile processor.
Good reading and sources
The facts on this page come from the Wikipedia article "Intel Timna", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like Timna
All CPUs and microprocessors
🇺🇸 United StatesNetBurst
Intel's Pentium 4-era x86 CPU design, built for very high clock speedsCPU · x86 · 2000
🇺🇸 United StatesPentium III
Intel's 32-bit P6 desktop and server CPU line, launched in 1999 with SSE.CPU · x86 · 1999
More from Intel
All of them
🇺🇸 United StatesBlackfin
Hybrid microprocessor and DSP family by Analog DevicesMicrocontroller · RISC · 2000
🇺🇸 United StatesIXP1200
Network processor for mid-range and high-end routersNetwork chip · Arm · 2000