Intel 8259
Programmable interrupt controller for early Intel microprocessors
The Intel 8259 is a programmable interrupt controller introduced in 1976. It manages hardware interrupts for the 8080 and 8085 processors. The upgraded 8259A version supported the 8086 and became standard in early IBM PCs. It allows multiple devices to share interrupt lines efficiently.
- Introduced in 1976 as part of the MCS 85 family
- Standard interrupt controller for the original IBM PC
- Supports cascading for up to 64 interrupt requests
- 8259A variant added level-triggered mode support
- Interface emulated in modern x86 platform controllers
What it is
The Intel 8259 is a programmable interrupt controller designed to manage hardware signals for microprocessors. Introduced in 1976 as part of the MCS 85 family, it was built for the Intel 8080 and 8085 chips. Its primary role is to combine multiple interrupt sources into a single output line for the central processor. This design extends the limited interrupt levels available on the processor chip itself. The later 8259A variant added compatibility with the 8086 and 8088 processors. It became a foundational component in personal computing history.
How it came about
Intel launched the original 8259 in 1976. The improved 8259A model followed, maintaining upward compatibility while adding support for newer processors. This chip became integral to the Industry Standard Architecture bus used in the original IBM PC in 1981. The PC/XT retained this single-chip configuration. When IBM introduced the PC/AT in 1983, a second 8259A was added to handle more devices. These controllers coexisted with the Advanced Programmable Interrupt Controller in later symmetric multiprocessor systems. Modern platforms have largely phased out the discrete chip in favor of integrated architectures.
Inside the chip
The device features eight interrupt request input lines, labeled IRQ0 through IRQ7. It sends a single interrupt output to the host processor. Up to eight slave units can connect to a master unit, creating a cascade that supports up to 64 interrupt requests. The chip supports edge-triggered and level-triggered modes. It also offers fixed and rotating priority schemes. End of interrupt operations can be specific, non-specific, or automatic. On the 8086, it provides an interrupt number on the data bus. For older 8080 systems, it issues three bytes corresponding to a call instruction.
How it was made
Intel designed and manufactured the 8259 series. The chip connects via standard signal pins including interrupt request lines and acknowledgment signals. Cascading connections use specific control lines to link multiple units together. The design prioritizes functional compatibility across different generations of Intel microprocessors.
Where it went
The 8259A served as the interrupt controller for the ISA bus in the original IBM PC and PC/XT. The PC/AT used two of these chips to manage sixteen interrupt lines. This configuration became standard for IBM PC compatibles. In modern x86 motherboards, the interface is often emulated within the Platform Controller Hub or southbridge. Operating systems like MS-DOS and Windows interact with it for backward compatibility. Linux and other systems may reconfigure it to avoid reserved vector ranges in protected mode.
Versions and family
The initial model was the 8259. The 8259A is the most common variant, offering buffered mode and level-triggered support. It remains upward compatible with the original design. In PC/AT systems, one chip acts as the master handling IRQ0 to IRQ7. A second chip acts as the slave for IRQ8 to IRQ15. The slave connects its interrupt output to the second input line of the master. This arrangement effectively reroutes the original IRQ2 line to IRQ9 for software compatibility.
Why it matters
This chip defined interrupt handling for the early personal computer era. Its mapping of interrupt vectors influenced BIOS design and operating system development. The need to maintain compatibility with its behavior has affected driver programming for decades. Spurious interrupts generated by the hardware require careful handling in software. The transition from this discrete logic to the APIC architecture marks a significant shift in PC hardware design. Legacy support for its interface persists in modern chipset designs.
Problems and reception
Programming the controller in MS-DOS and Windows environments introduced complex compatibility issues. Device drivers must send specific end-of-interrupt signals to function correctly. The remapping of IRQ2 to IRQ9 required BIOS handlers to redirect interrupts for older software. Operating systems that bypass the BIOS can configure the controller to avoid conflicts with processor exceptions. Noise on interrupt lines can cause spurious signals, requiring robust error handling in device drivers.
Questions people ask about Intel 8259
What is the main function of the Intel 8259?
It combines multiple interrupt input sources into a single output for the microprocessor. This allows the system to handle more hardware devices than the processor could manage on its own. It extends the available interrupt levels beyond the one or two found on the CPU chip.
How many interrupt lines can the 8259 support?
A single unit handles eight interrupt request lines. By cascading up to eight slave units to a master unit, the system can support up to 64 interrupt requests. The IBM PC/AT used two chips to manage sixteen lines for the ISA bus.
What is the difference between the 8259 and 8259A?
The 8259A is upward compatible with the original 8259 but adds extra features. It supports buffered mode and level-triggered interrupt modes. It was designed to work with the Intel 8086 and 8088 processors, unlike the original which targeted the 8080 and 8085.
Why does IRQ2 become IRQ9 in PC/AT systems?
The slave controller connects to the master's second input line. To maintain compatibility with older software expecting IRQ2, the BIOS redirects interrupts from the slave's second line to appear as IRQ9. This allows legacy device drivers to function without modification.
Good reading and sources
The facts on this page come from the Wikipedia article "Intel 8259", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like Intel 8259
All analog, power and mixed-signal
🇺🇸 United StatesIntel 8231/8232
Early single-chip floating-point coprocessors for microcomputers.Analog · Other · 1977