
Voodoo2
3D graphics accelerator chipset with dual-texturing and SLI support
The Voodoo2 is a dedicated 3D graphics chipset released by 3dfx Interactive in February 1998. It introduced single-cycle dual-texturing and Scan-Line Interleave technology, allowing two cards to work in parallel for higher performance and resolution.
- Released in February 1998 by 3dfx Interactive
- First consumer card with single-cycle dual-texturing
- Introduced SLI for parallel processing on PCs
- Uses three chips with a 90 MHz clock speed
- Supports resolutions up to 1024 x 768 in SLI mode
What it is
The Voodoo2 is a set of three specialized chips designed for 3D graphics acceleration. Released in February 1998 by 3dfx Interactive, it replaced the original Voodoo Graphics chipset. Unlike competitors that integrated 2D and 3D functions, the Voodoo2 was a dedicated 3D accelerator. It required a separate 2D graphics card and connected via a VGA pass-through cable. This design allowed it to focus entirely on rendering complex 3D scenes without handling desktop display tasks.
How it came about
3dfx launched the Voodoo2 to succeed its popular Voodoo Graphics chip. The goal was to maintain leadership in PC gaming performance. By early 1999, the company released the Voodoo3, which consolidated features into a single card. The Voodoo2 remained competitive for some time due to its SLI capability and strong software support through the Glide API. Enthusiasts continued using it even after newer cards like the NVIDIA GeForce 256 arrived.
Inside the chip
The chipset contains three distinct chips. One handles the framebuffer, while the other two are texture mapping units (TMUs). This setup enables single-cycle dual-texturing, applying two textures to a polygon in one pass. The core and memory run at 90 MHz. Data moves across a 192-bit total bus width. The card uses EDO DRAM, available in 8 MB or 12 MB configurations. The larger memory model supports more detailed textures. It connects to the PC via the PCI interface.
How it was made
The Voodoo2 uses high-speed EDO DRAM rated at 100 MHz, though it operates at 90 MHz. The memory configuration includes 4 MB for the framebuffer and Z-buffer, with the remaining 4 or 8 MB allocated for textures. The chipset achieves a sustained fill rate of 90 million pixels per second. In SLI mode, this throughput doubles to 180 million pixels per second. The physical card plugs into a PCI slot and requires an external VGA cable for video output.
Where it went
Gamers used the Voodoo2 in PCs running DOS, Windows 95, and Windows 98. Titles like Quake II and Unreal exploited its dual-texturing ability. The card supported various development tools, including Glide, Direct3D 5.0, and OpenGL. Because it lacked 2D acceleration, users paired it with a standard VGA card. The pass-through connection merged the 3D image with the 2D desktop signal, though this sometimes softened the picture quality slightly.
Versions and family
Two main models existed: one with 8 MB of RAM and another with 12 MB. The 8 MB version could be upgraded via a daughter board. 3dfx also offered a budget option called the Voodoo Banshee, which combined 2D and 3D functions but lacked one TMU. The Voodoo3 later replaced the Voodoo2 as the flagship product. The Voodoo3 2000 matched the performance of a Voodoo2 SLI setup in some cases.
Why it matters
The Voodoo2 brought Scan-Line Interleave (SLI) to the consumer PC market. This technology allowed two cards to render alternate scan lines, doubling performance and increasing maximum resolution to 1024 by 768. Its longevity was aided by the Glide API, which many games optimized specifically for 3dfx hardware. Even after obsolescence, enthusiasts managed to run later games like Doom 3 on Voodoo2 SLI setups.


Questions people ask about Voodoo2
Why does the Voodoo2 need a separate graphics card?
The Voodoo2 is a dedicated 3D accelerator without 2D or VGA capabilities. It must be paired with a standard 2D graphics card. A VGA pass-through cable connects the 2D card to the Voodoo2 to display the final image on the monitor.
What is SLI and how does it work on the Voodoo2?
Scan-Line Interleave (SLI) allows two Voodoo2 cards to work together. Each card renders half the screen lines. This doubles rendering throughput and increases framebuffer memory, enabling higher resolutions like 1024 by 768.
What is the difference between the 8 MB and 12 MB models?
Both models have 4 MB of framebuffer memory. The 8 MB card has 4 MB of texture memory, while the 12 MB card has 8 MB. The extra texture memory allows for more detailed textures in games. The 8 MB model can be upgraded.
Good reading and sources
The facts on this page come from the Wikipedia article "Voodoo2", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like Voodoo2
All graphics processors
🇺🇸 United StatesS3 Savage
PC graphics chipset series by S3 GraphicsGPU · GPU architecture · 1998