Voodoo 5
Final graphics card series from 3dfx Interactive
The Voodoo 5 was the last graphics card line released by 3dfx Interactive in June 2000. Built on the scalable VSA-100 chip, it offered advanced anti-aliasing but lacked modern shader support, marking the end of the company before its assets were bought by Nvidia.
- Last graphics card series from 3dfx Interactive
- Based on scalable VSA-100 graphics processor
- Supported rotated-grid super-sampling anti-aliasing
- Voodoo 5 6000 prototype used four chips and 128 MB RAM
- Released in June 2000 before company bankruptcy
What it is
The Voodoo 5 was the final and most powerful graphics card series produced by 3dfx Interactive. Released in June 2000, the family relied on the VSA-100 graphics processor. This chip was designed for scalability, allowing multiple units to work together on a single board. Only the single-chip Voodoo 4 4500 and the dual-chip Voodoo 5 5500 reached consumers. The line represented the peak of 3dfx hardware before the company ceased operations.
How it came about
Development focused on the VSA-100, a direct descendant of the Voodoo3 Avenger core. The team aimed to create a scalable architecture that could serve various market segments using one chip design. While the Voodoo 5 5500 launched in mid-2000, higher-end models like the Voodoo 5 6000 remained unreleased due to financial troubles. 3dfx went bankrupt later that year, and Nvidia purchased its assets. A successor codenamed Rampage was in early development but never shipped.
Inside the chip
The VSA-100 chip used a 250 nm process with improvements like a sixth metal layer and shorter gate lengths. It featured 14 million transistors and a dual pixel pipeline with one texture unit each. This 2x1 configuration allowed two pixels and two texels per clock. The design supported 32-bit color depth and large textures up to 2048 pixels. A key feature was the T-buffer, which enabled rotated-grid super-sampling anti-aliasing. Multiple chips linked via Scan-Line Interleave increased anti-aliasing levels proportionally.
How it was made
Manufacturing used a tweaked 250 nm semiconductor process. The VSA-100 contained roughly 14 million transistors. Memory interfaces were 128-bit SDRAM, clocked synchronously with the chip. The high-end Voodoo 5 6000 prototype used four processors and 128 MB of RAM. This complex board required an external power supply called Voodoo Volts because it exceeded AGP power limits. Production costs were high due to board complexity and component redundancy.
Where it went
These cards targeted personal computers for gaming. The Voodoo 5 5500 competed with the Nvidia GeForce 2 GTS and ATI Radeon DDR. It supported Direct3D 6.0 and MPEG-2 video acceleration. However, it lacked hardware transform and lighting acceleration found in DirectX 7. The absence of DirectX 8.0 shaders limited its longevity against newer rivals like the GeForce 3. Enthusiasts used pre-release hardware to test performance against contemporary GPUs.
Versions and family
The Voodoo 4 4500 was a budget single-chip model. The Voodoo 5 5500 used two chips and came in AGP, PCI, and Mac editions. The unreleased Voodoo 5 6000 featured four chips and 128 MB of memory. Several prototype revisions of the 6000 existed, using Intel or HiNT bridge chips. Clock speeds varied between 166 MHz and 183 MHz across these tests. A planned successor, Rampage, was cancelled after about twenty working cards were made.
Why it matters
The Voodoo 5 marked the end of 3dfx as an independent hardware maker. Its scalable architecture demonstrated technical ingenuity but suffered from high production costs. The reliance on multiple chips increased board complexity without adding modern shader features. Competitors like Nvidia and ATI moved toward single-chip designs with advanced programmable pipelines. The brand's assets were acquired by Nvidia in late 2000, ending the Voodoo lineage.
Problems and reception
Reviewers noted that the Voodoo 5 5500 was late to market. It struggled against the GeForce 2 GTS and Radeon DDR in performance. The unreleased Voodoo 5 6000 showed promise in tests, beating the GeForce 2 Ultra. However, its projected price of US$600 was considered too high. Critics pointed out the lack of next-generation shader support. Stability issues plagued early prototypes of the 6000, with thermal problems at higher clock speeds.



Questions people ask about Voodoo 5
What is the VSA-100 chip?
The VSA-100 is the graphics processor used in all Voodoo 5 cards. Its name stands for Voodoo Scalable Architecture. It allows multiple chips to run in parallel on one board to increase performance.
Did the Voodoo 5 support DirectX 8?
No, the Voodoo 5 did not support DirectX 8.0 vertex and pixel shaders. It supported Direct3D 6.0 and lacked hardware transform and lighting acceleration found in DirectX 7.
Why was the Voodoo 5 6000 never released?
The Voodoo 5 6000 was cancelled due to the financial collapse of 3dfx. High production costs and the need for an external power supply also made it difficult to compete profitably against rivals.
What is Scan-Line Interleave?
Scan-Line Interleave, or SLI, is a technology that links multiple VSA-100 chips on a card. It allows them to work in parallel, increasing fillrate and enabling higher levels of anti-aliasing.
Good reading and sources
The facts on this page come from the Wikipedia article "Voodoo 5", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
