TI-AR7
Single-chip ADSL router solution with MIPS processor and DSP
The TI-AR7 is a system on a chip designed by Texas Instruments for ADSL access routers. It integrates a MIPS processor, digital signal processor, and analog front end to handle broadband connections in consumer networking hardware.
- Integrates MIPS processor, DSP, and ADSL analog front end
- Sold by TI to Infineon in 2007, then to Lantiq in 2009
- Used in Netgear DG834, Linksys WAG54G, and AVM Fritz!Box
- Package is a 324-ball BGA with 1.0-mm pitch
- Includes 4 KiB on-chip PROM and RAM for booting
What it is
The TI-AR7 is a fully integrated system on a chip that serves as an ADSL customer premises equipment access router solution. Texas Instruments developed this single-chip design to combine processing, signal handling, and physical connectivity. It merges a MIPS32 central processor with a digital signal processor based transceiver and an analog front end for telephone lines. This integration allows manufacturers to build compact broadband modems and routers without needing multiple discrete components for each function.
How it came about
Texas Instruments originally designed and released the AR7 chipset for the broadband market. In 2007, the company sold its DSL business unit to Infineon Technologies. Two years later, Infineon spun off its wireline division into a new standalone entity called Lantiq. Lantiq announced its independence in November 2009 and continued to support the architecture under the XWAY brand. This ownership chain moved the technology from TI to Infineon and finally to Lantiq.
Inside the chip
The chip features a high performance MIPS 4KEc 32-bit RISC processor for general computing tasks. For signal processing, it uses a subsystem based on the TI C62x digital signal processor, which includes the transceiver, codec, line driver, and receiver. Hardware acceleration handles ATM segmentation and reassembly. Connectivity options include two Ethernet MACs with quality of service support, an integrated IEEE 802.3 physical layer, and a USB 1.1 slave transceiver. Expansion is possible via two VLYNQ interfaces, while serial communication uses two UARTs. The device boots using 4 KiB of on-chip PROM and RAM.
How it was made
The physical package for the TI-AR7 is a 324-ball ball grid array with a 1.0-mm ball pitch. This surface-mount packaging allows for dense circuit board layouts typical in consumer electronics. The integration of memory and processing units onto a single die reduces the external component count required for final assembly.
Where it went
Many consumer broadband devices utilized the AR7 chipset. Notable examples include the Netgear DG834 series versions one through three, various Linksys models like the WAG54G and AG241, and the AVM Fritz!Box. Other manufacturers such as D-Link, Aztech, Siemens, and Huawei also incorporated the chip into their DSL modems and routers. Some variants supported additional features like WiFi interfaces or voice over IP capabilities. Third-party firmware projects like OpenWrt and RouterTech have developed software support for these devices.
Versions and family
Several options existed within the AR7 family. The AR7WRD, also known as TNETD7300GDU, included an interface for WiFi cards. The AR7VWI combined DSL, VoIP, and wireless functions, while the AR7V focused on DSL and VoIP. Other variants included the AR7DB, AR7RD, AR7VW, and AR7WI. Bootloader options varied by device, with some using Adam2 and others using Pspboot. These variations allowed manufacturers to tailor the chip to specific product requirements.
Why it matters
The AR7 became a common foundation for early broadband home networking gear. Its integration of processing and analog functions simplified the design of ADSL modems for many major vendors. The widespread adoption by companies like Netgear, Linksys, and Siemens helped establish it as a standard reference design in the mid-2000s. The transition to Lantiq ensured continued availability for legacy systems even after Texas Instruments exited the DSL market.

Questions people ask about TI-AR7
What kind of processor does the TI-AR7 use?
The chip contains a MIPS 4KEc 32-bit RISC processor. This core handles the main computing tasks for the router firmware and network management functions within the device.
Which companies owned the AR7 technology over time?
Texas Instruments originally designed the chip. They sold the DSL business to Infineon in 2007. Infineon later spun off the division to Lantiq, which became a standalone company in November 2009.
Can I install custom firmware on AR7 devices?
Yes, third-party projects like OpenWrt and RouterTech have released open source firmware for devices based on this chipset. Support varies by specific router model and memory configuration.
Good reading and sources
- Texas Instruments AR7 on WikipediaEncyclopedia
- More photos on Wikimedia CommonsPhotos
- Wikidata recordOpen data
The facts on this page come from the Wikipedia article "Texas Instruments AR7", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like TI-AR7
All systems on a chip
🇺🇸 United StatesOMAP
Texas Instruments system on chip for mobile multimediaSoC · Arm
🇺🇸 United StatesXilleon
System on chip family for digital television and set-top boxesSoC · MIPS
More from Texas Instruments
All of them
🇺🇸 United StatesLM3914
Analog display driver for LED bar graphs and dot metersAnalog