
RapidCAD
A 486DX in a 386 socket, with a dummy FPU chip to match.
RapidCAD is a two-chip upgrade set from Intel that puts an i486DX processor into a board built for the 80386. The second, dummy chip fills the old 387 socket and supplies the error signal the system expects. It was sold mainly to speed up floating-point work such as computer-aided design.
- An i486DX core packaged to fit an Intel 80386 socket
- RapidCAD-2 is a dummy FPU that only supplies the FERR signal
- Floating-point work runs up to 80% faster than a 386DX
- No level 1 cache, so integer gains stay around 10% typical
- CHMOS 0.8 µm, 800,000 transistors, 132-pin CPGA
What it is
RapidCAD is a matched pair of Intel chips sold as a drop-in upgrade for machines built around the 80386 processor and its 80387 floating-point unit. The main chip, RapidCAD-1, is an i486DX in a special package that fits the 386 socket. Because that part already carries its own floating-point hardware on the die, the second chip, RapidCAD-2, is a dummy that sits in the 387 socket and only provides the FERR (floating-point error) signal older boards expect. Intel pitched it at computer-aided design, where floating-point maths dominates, and set a suggested list price of US$499.
How it came about
The set was aimed at owners of 386DX systems who wanted 486-class maths without replacing the motherboard. Intel packaged its existing i486DX core so it could drop into the older socket, and supplied a companion part to occupy the vacant 387 slot and keep the board's error signalling intact. Marketing centred on CAD workloads, which is where the RapidCAD name comes from.
Inside the chip
RapidCAD-1 carries an i486DX core, so the integer and floating-point units sit on one die and run instructions in the same number of cycles as a standard i486DX. RapidCAD-2 has 275,000 transistors but does no arithmetic; it exists to drive the FERR line. Two things hold the package back. There is no level 1 cache, the small fast memory normally built into a 486, and all traffic still crosses the narrow 386 bus. Both parts run at 5 V and 16–33 MHz.
How it was made
RapidCAD-1 is built on a CHMOS 0.8 µm process and holds 800,000 transistors in a 132-pin ceramic PGA package. RapidCAD-2 uses CHMOS as well, with 275,000 transistors in a 68-pin ceramic PGA. Both are rated for 5 V operation across 16–33 MHz. The sSpec codes are SZ624 for RapidCAD-1 and SZ625 for RapidCAD-2.
Where it went
RapidCAD went into existing 386DX desktop motherboards as a processor upgrade, with the main chip in the CPU socket and the dummy part in the 387 maths socket. Its intended workload was computer-aided design and other floating-point heavy tasks. Integer code gains little, typically about 10% over a 386DX and at best 35%, while floating-point work runs up to 80% faster. One report puts the overall gain at 20 to 170% against ordinary 386DX boards.
Versions and family
The set has two parts. RapidCAD-1 is the processor, a 132-pin CPGA carrying the i486DX core with 800,000 transistors. RapidCAD-2 is the 68-pin dummy FPU with 275,000 transistors. Both share the 16–33 MHz clock range and 5 V supply. Related Intel upgrade products include the 80486 OverDrive and the Pentium OverDrive.
Why it matters
RapidCAD showed that a 486-class core could be fitted to a 386 board by repackaging the silicon and faking the companion maths chip. Its value was narrow but real: CAD users got much faster floating-point maths from hardware they already owned. Integer performance barely moved, so the product is remembered as a floating-point upgrade rather than a general speed-up.
Problems and reception
The main criticism is that integer performance improves only slightly, because the design lacks level 1 cache and remains tied to the 386 bus. Reported speed-ups vary widely, from a modest 10% to as much as 170% depending on the workload and the report. The set was offered at a manufacturer's suggested list price of US$499.

Questions people ask about RapidCAD
Why does RapidCAD need two chips?
The i486DX already has its floating-point unit on the die, so no real maths coprocessor is needed. The second package is a dummy that fills the 387 socket and drives the FERR signal, which older motherboards require for correct floating-point error handling.
How much faster is it than a 386DX?
Integer code improves little, typically about 10% and at most 35%. Floating-point work gains much more, up to 80% faster in Intel's marketing, while one report puts the overall boost at 20 to 170% depending on the board and workload.
Why is integer performance not much better?
RapidCAD has no level 1 cache, the small on-chip memory a 486 normally uses to avoid slow memory accesses. It also still talks to the rest of the machine over the 386 bus, which limits how fast data can move.
What is inside the two packages?
RapidCAD-1 holds the i486DX core, 800,000 transistors in a 132-pin ceramic PGA. RapidCAD-2 holds 275,000 transistors in a 68-pin ceramic PGA but performs no arithmetic. Both run at 5 V and 16–33 MHz on a CHMOS process.
Good reading and sources
The facts on this page come from the Wikipedia article "RapidCAD", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like RapidCAD
All CPUs and microprocessors
🇺🇸 United StatesIntel 8080
An 8-bit microprocessor released in 1974 that launched the personal computer era.CPU · x86 · 1974
More from Intel
All of them
WorldMOS Technology 8502
An 8-bit CPU from MOS Technology that powered the Commodore 128CPU · 8-bit