Quad Data Rate SRAM
High-speed static memory with separate read and write buses
Quad Data Rate SRAM is a static memory type that transfers four data words per clock cycle. It uses separate clocks and buses for reading and writing to maintain high bandwidth in networking hardware.
- Transfers four data words per clock cycle
- Uses separate clocks for read and write operations
- Designed by Micron and Cypress Semiconductor
- Eliminates bus turnaround losses in mixed workloads
- QDR-II+ variant targets radiation-hardened environments
What it is
Quad Data Rate SRAM is a specific type of static random-access memory designed for high-speed data transfer. It moves up to four words of data during every single clock cycle. This technology was developed to support applications where throughput matters more than cost or power savings. Manufacturers such as Micron and Cypress created it to serve networking and communications hardware. The chip allows reads and writes to happen at high frequencies without losing bandwidth to bus turnaround delays.
How it came about
Micron and Cypress Semiconductor originally created the QDR SRAM technology. Other companies later joined the effort, including IDT, NEC, Samsung, and Renesas. These manufacturers built the chips to meet the needs of fast communications systems. Cypress Semiconductor has since worked on designing QDR-II+ memory variants. These newer versions target radiation-hardened environments, expanding the use cases beyond standard commercial networking gear.
Inside the chip
The chip uses two distinct clocks: one for reading data and another for writing. It also features separate data buses for input and output, known as Separate I/O. This setup avoids the contention issues found in DDR SRAM, which shares a single bus. Addresses for reads latch on the rising edge of the output clock, while write addresses latch on the input clock. The design creates an illusion of concurrent operations, though internal actions remain sequential and pipelined.
How it was made
Most makers produce QDR and DDR SRAM using the same physical silicon wafers. They differentiate the final product through post-manufacturing steps, such as blowing a fuse on the chip. This method allows factories to switch between memory types without changing the core fabrication process. The approach simplifies production while enabling distinct performance characteristics for different market needs.
Where it went
This memory type serves high-speed communications and networking applications. It is chosen when data throughput is the primary concern, rather than cost efficiency or storage density. The separate buses ensure that interleaved read and write cycles do not lose efficiency. Standard DDR memory struggles with mixed workloads due to bus turnaround times, making QDR ideal for complex network traffic handling.
Versions and family
The family includes standard QDR and the newer QDR-II+ designs. Cypress Semiconductor is currently developing the QDR-II+ variant specifically for radiation-hardened environments. Most manufacturers offer both QDR and DDR versions from the same base silicon, selecting the mode after production. This flexibility allows the same physical chip to serve different interface requirements based on configuration.
Why it matters
QDR SRAM solved the bandwidth loss problem inherent in double-data-rate memory during mixed access patterns. By eliminating bus turnaround cycles, it achieved full efficiency when reads and writes are interleaved. This capability made it a standard choice for high-performance networking equipment where consistent data flow is critical. It demonstrated that separate I/O paths could outperform shared buses in specific high-frequency scenarios.
Questions people ask about Quad Data Rate SRAM
How does QDR SRAM differ from DDR SRAM?
QDR SRAM uses separate clocks and data buses for reading and writing. DDR SRAM uses a single clock and a shared bus. This separation allows QDR to avoid bandwidth loss during bus turnaround when mixing read and write cycles.
Who developed Quad Data Rate SRAM technology?
Micron and Cypress Semiconductor originally created the technology. Other manufacturers such as IDT, NEC, Samsung, and Renesas later produced their own versions of the memory chips for networking applications.
Why is QDR SRAM used in networking hardware?
It provides high data throughput with no efficiency loss when reads and writes are interleaved. Networking applications often require mixed access patterns, where QDR maintains full bandwidth unlike DDR memory which loses cycles to bus turnaround.
Good reading and sources
The facts on this page come from the Wikipedia article "Quad data rate SRAM", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.