PA-7200
HP microprocessor for small multiprocessing systems
Hewlett-Packard introduced the PA-7200 microprocessor in early 1995 to power small multiprocessing workstations. It implemented the PA-RISC 1.1 instruction set and featured a dual integer unit design for improved performance.
- Implements PA-RISC 1.1 instruction set
- Contains 1.3 million transistors
- Uses unique 4.4 V power supply
- Fabricated on 0.55 μm CMOS14A process
- Issues two integer instructions per cycle
What it is
The PA-7200 is a central processing unit developed by Hewlett-Packard. It executes the PA-RISC 1.1 instruction set architecture. HP launched this chip in early 1995 for use in their own computer systems. The design targets small multiprocessing environments that use two or four processors. It was not available for general retail sale. Only specific partners like Convex Computer and Stratus Computer used it externally. These companies were part of the Precision RISC Organization.
How it came about
Engineers derived the PA-7200 largely from the earlier PA-7100 model. They presented the initial design details at technical conferences such as Compcon and ISSCC. The development team aimed to enhance performance for parallel processing tasks. By adding a second integer execution unit, they allowed the chip to handle more instructions simultaneously. This evolution supported the growing demand for affordable multiprocessing systems in the mid-1990s.
Inside the chip
This processor features two integer units instead of one. The primary unit handles complex operations while the secondary unit processes simple, frequent instructions. This arrangement allows the chip to issue up to two integer instructions per clock cycle. The design originated in a 0.8 μm process but was shrunk to fit a smaller manufacturing node. This shrinkage required a unique power supply voltage of 4.4 V. Standard 5.0 V would damage the thin gate oxide, while 3.3 V limited speed.
How it was made
Hewlett-Packard manufactured the PA-7200 using their internal CMOS14A process. This technology was co-developed with Analog Devices and features a 0.55 μm scale. The fabrication uses three levels of interconnects. The final die measures 14.0 mm by 15.0 mm, covering an area of 210 mm2. It contains approximately 1.3 million transistors. The unusual 4.4 V requirement resulted from compromising between oxide tolerance and performance goals.
Where it went
The chip primarily powered HP workstations and servers configured for multiprocessing. It enabled cost-effective systems with two or four CPUs working together. Beyond HP, the PA-7200 appeared in machines from Convex Computer and Stratus Computer. These third-party implementations were rare since the chip was not sold on the open market. Its role focused on providing reliable compute power for technical and enterprise applications.
Versions and family
The PA-7200 serves as an enhanced version of the PA-7100. It carries the code name Thunderbird and the internal designation PCX-T. No direct successor is listed in the provided records, nor is a specific predecessor beyond the PA-7100 mentioned as being replaced directly by this specific model in a linear line. It remains a distinct step in the PA-RISC evolution focused on integer throughput.
Why it matters
This microprocessor helped make multiprocessing more accessible for smaller systems. By improving integer instruction handling, it boosted performance for typical workloads. Its inclusion in the Precision RISC Organization ecosystem supported broader industry adoption of PA-RISC technology. The design choices regarding voltage and process shrinkage demonstrated practical engineering trade-offs during semiconductor scaling in the 1990s.
Questions people ask about PA-7200
What instruction set does the PA-7200 use?
The PA-7200 implements the PA-RISC 1.1 instruction set architecture. This reduced instruction set computing design was developed by Hewlett-Packard for their workstation and server lines.
Why does the PA-7200 use 4.4 volts?
The chip uses 4.4 V because its 0.55 μm process has a thin gate oxide that cannot handle 5.0 V. However, 3.3 V was insufficient for reaching target clock speeds, making 4.4 V a necessary compromise.
Who could buy the PA-7200 processor?
HP did not sell the PA-7200 openly. It was used in HP systems and by two third-party members of the Precision RISC Organization: Convex Computer and Stratus Computer.
Good reading and sources
The facts on this page come from the Wikipedia article "PA-7200", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like PA-7200
All CPUs and microprocessors
🇺🇸 United StatesDEC Alpha
A 64-bit RISC architecture by Digital Equipment CorporationCPU · RISC · 1992
More from Hewlett-Packard
All of them
🇺🇸 United StatesPA-7100LC
Low-cost PA-RISC microprocessor with multimedia extensionsCPU · RISC · 1994