
PA-7100LC
Low-cost PA-RISC microprocessor with multimedia extensions
Hewlett-Packard released the PA-7100LC in 1994 as an affordable processor for entry-level workstations. It introduced MAX-1 multimedia instructions to speed up video decoding and integrated key controllers on the die to reduce system costs.
- First PA-RISC chip with MAX-1 multimedia instructions
- Fabricated using a 0.8 μm CMOS process by HP
- Integrates memory and I/O controllers on the die
- Launched with 60 and 80 MHz speeds in January 1994
What it is
The PA-7100LC is a microprocessor built by Hewlett-Packard that follows the PA-RISC 1.1 instruction set. Known internally as Hummingbird or PCX-L, it launched in early 1994 to serve low-end computing systems. This chip was notable for being the first in its family to include MAX-1 instructions, which helped decode MPEG video faster. HP designed it to be inexpensive by placing memory and input-output controllers directly on the silicon die.
How it came about
HP developed this processor as a cost-effective evolution of the earlier PA-7100. The goal was to create a capable chip for mid-range multimedia workstations without the high price of high-end models. Systems using the initial 60 and 80 MHz versions appeared in January 1994. A faster 100 MHz model followed in June of that same year. The design prioritized common tasks like single-precision math over complex double-precision calculations to save space.
Inside the chip
The architecture improves upon its predecessor with better superscalar execution, allowing multiple instructions to run simultaneously. An extra integer unit enables the chip to issue two integer operations or mixed load and store commands in a single cycle. It supports bi-endian data formats and uncacheable memory pages. The floating-point unit was shrunk by simplifying its multiplier, which kept single-precision speed high but slowed double-precision tasks. On-chip caches include a small 1 KB instruction cache, while larger unified external caches hold both data and instructions.
How it was made
Hewlett-Packard manufactured the chip using its 0.8 μm three-level metal CMOS26B process. The die contains 900,000 transistors and measures 14.2 by 14.2 mm, covering an area of roughly 201.64 square mm. To keep costs down, HP integrated the memory controller and I/O controller directly onto the processor. The final component is housed in a 432-pin ceramic pin grid array package, which connects it to the motherboard.
Where it went
This processor powered entry-level and mid-range workstations from Hewlett-Packard. Its ability to handle multimedia tasks made it suitable for systems requiring MPEG video decoding. The integrated controllers simplified the design of these computers, reducing the number of separate chips needed on the board. It served as a bridge between basic computing and more demanding graphical applications before higher-end models took over.
Versions and family
The PA-7300LC succeeded this chip in mid-1996, targeting similar low-to-mid range markets. While the PA-7100LC relied on external caches, the later PA-7300LC integrated significant on-chip cache memory and additional controllers. The PA-7100LC itself had no direct variants mentioned, but it evolved from the PA-7100 and paved the way for the PA-8000 series in high-end systems.
Why it matters
As the first PA-RISC chip with MAX-1 multimedia extensions, it demonstrated how processors could accelerate video tasks through specific instructions. Its design choices, such as integrating controllers and optimizing for single-precision math, influenced later low-cost workstation designs. The chip helped HP compete in the affordable workstation market by balancing performance with manufacturing efficiency.

Questions people ask about PA-7100LC
What makes the PA-7100LC different from earlier PA-RISC chips?
It was the first in the family to include MAX-1 multimedia instructions for better video decoding. It also integrated memory and I/O controllers on the die to lower system costs and featured improved superscalar execution.
How fast does the PA-7100LC run?
The initial models released in January 1994 operated at 60 MHz and 80 MHz. A faster version running at 100 MHz was introduced later in June 1994 for systems needing more performance.
Who manufactured the PA-7100LC?
Hewlett-Packard designed and fabricated the chip themselves. They used their proprietary 0.8 μm three-level metal CMOS26B process to produce the processor in their own facilities.
Good reading and sources
The facts on this page come from the Wikipedia article "PA-7100LC", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like PA-7100LC
All CPUs and microprocessorsMore from Hewlett-Packard
All of them
🇺🇸 United StatesDEC Alpha
A 64-bit RISC architecture by Digital Equipment CorporationCPU · RISC · 1992