MC88110
Second-generation Motorola RISC microprocessor for workstations
The MC88110 is a second-generation microprocessor from Motorola that implements the 88000 instruction set. Released in 1992 at 50 MHz, it introduced superscalar execution and out-of-order completion to the family, though it saw limited adoption before being replaced by PowerPC chips.
- Launched in 1992 at 50 MHz clock speed
- Contains 1.3 million transistors on a 225 mm2 die
- Features two-way superscalar and out-of-order execution
- Used in Data General AViiON and Harris UNIX systems
What it is
The MC88110 is a microprocessor developed by Motorola as the second generation of its 88000 architecture. It was designed for personal computers and workstations, aiming to correct deficiencies found in the earlier MC88100 model. The chip features advanced execution capabilities for its time, including speculative execution and out-of-order completion. Despite these technical improvements, it achieved limited market success and was used in only a few systems before Motorola shifted focus to the PowerPC alliance with IBM.
How it came about
Motorola first presented technical details of the MC88110 at the Microprocessor Forum in San Francisco in November 1991. The processor officially launched in 1992 with an initial clock speed of 50 MHz. Early adopters included Data General for their AViiON servers and Harris for real-time UNIX systems. Motorola also used the chip in its own single-board computers. NeXT had planned to release a workstation based on this processor, but cancelled the project after exiting the hardware business.
Inside the chip
The MC88110 implements the 88000 instruction set with several extensions. It includes a separate floating-point register file and supports 80-bit extended-precision data types. New integer and graphics instructions were added to improve performance. Architecturally, it uses a von Neumann model externally but employs a modified Harvard architecture internally with separate caches for instructions and data. Key microarchitectural features include two-way superscalar execution, allowing multiple instructions per cycle, along with out-of-order completion and speculative execution.
How it was made
The die contains 1.3 million transistors and measures 15 mm by 15 mm, totaling 225 square millimetres. It was fabricated using a 1 μm complementary metal–oxide–semiconductor (CMOS) process. This manufacturing technique uses three levels of aluminium interconnect and achieves an effective channel length of 0.8 μm. The design allowed for a future shrink to a 0.8 μm process with a 0.65 μm channel length without requiring modifications to the layout.
Where it went
The processor was intended for workstations and personal computers. In practice, it powered specific niche systems rather than mass-market devices. Data General integrated the chip into their AViiON server line. Harris utilized it for real-time UNIX computing environments. Motorola also deployed the MC88110 in its proprietary single-board computer products. A planned NeXT workstation was cancelled, limiting the chip's visibility in the broader workstation market.
Versions and family
The MC88110 succeeded the MC88100 as the second implementation of the 88000 ISA. It did not have many direct siblings due to its limited commercial lifespan. Motorola eventually replaced the 88000 family with PowerPC microprocessors, which were developed jointly with IBM under the AIM alliance. The MC88110 remained available for purchase until the mid-1990s, despite being superseded by newer architectures.
Why it matters
The MC88110 introduced significant architectural advancements to the 88000 family, such as superscalar execution. However, it failed to gain widespread traction in the industry. Its lack of success contributed to Motorola's decision to abandon the 88000 architecture in favour of the PowerPC partnership. The chip serves as an example of technically capable designs that struggle against market shifts and competing standards.
Questions people ask about MC88110
What instruction set does the MC88110 use?
It implements the 88000 instruction set architecture. This is a reduced instruction set computing (RISC) design developed by Motorola. The MC88110 adds extensions like separate floating-point registers and new graphics instructions to the original ISA.
Which companies used the MC88110 in their products?
Data General used it in AViiON servers, and Harris included it in real-time UNIX systems. Motorola also used the chip in its own single-board computers. NeXT planned to use it but cancelled their workstation project before completion.
How was the MC88110 manufactured?
The chip was fabricated using a 1 μm CMOS process with three levels of aluminium interconnect. The die measures 15 mm by 15 mm and contains 1.3 million transistors. The effective channel length of the transistors is 0.8 μm.
Good reading and sources
The facts on this page come from the Wikipedia article "Motorola 88110", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like MC88110
All CPUs and microprocessors
🇺🇸 United StatesClipper
32-bit RISC-like CPU architecture by Fairchild and IntergraphCPU · RISC · 1986
🇺🇸 United StatesR2000
Early 32-bit RISC microprocessor chipset from MIPSCPU · MIPS · 1986