HP FOCUS
First commercial single-chip 32-bit microprocessor from 1982
Hewlett-Packard released the FOCUS in 1982 as the first fully 32-bit microprocessor on a single chip. It powered HP 9000 Series 500 workstations and solved heat issues with special copper-core circuit boards.
- First commercial single-chip fully 32-bit microprocessor
- Launched in 1982 by Hewlett-Packard
- Contains 450,000 FETs using NMOS-III process
- Uses special copper-core finstrates for cooling
- Implements a stack architecture with no visible registers
What it is
The HP FOCUS is a central processing unit developed by Hewlett-Packard. Launched in 1982, it holds the distinction of being the first commercial microprocessor to offer full 32-bit capability on a single silicon chip. Before this release, other 32-bit systems from companies like IBM and DEC relied on multi-chip designs. Even contemporary single-chip rivals mixed 16-bit and 32-bit features. HP integrated this processor into its HP 9000 Series 500 workstations and servers, establishing a new standard for compact high-performance computing hardware at the time.
How it came about
Hewlett-Packard designed the FOCUS to bring the power of their mainframe systems to smaller machines. The architecture draws heavy inspiration from the custom silicon on sapphire chips used in the HP 3000 series. By adapting the stack-based design of the 16-bit HP 3000 into a 32-bit format, engineers created a unique instruction set. This effort resulted in a processor that avoided the complexity of bit-slice designs common among competitors, allowing HP to launch the HP 9020, later known as the HP 9000 Series 500.
Inside the chip
The processor implements a stack architecture rather than using general purpose registers visible to programmers. It supports over 220 instructions, with widths varying between 16 and 32 bits. Internal data paths and registers are uniformly 32 bits wide. A microcode control store manages operations, sized at 9,216 by 38 bits. The system uses a segmented memory model. This design choice reflects its lineage from earlier HP mainframes, prioritizing compact code density and efficient handling of complex subroutine calls without exposing register management to software developers.
How it was made
Hewlett-Packard manufactured the chip using its proprietary NMOS-III integrated circuit process. This method allowed for high transistor density, reaching a total count of 450,000 field-effect transistors. However, the dense packing generated significant heat. To manage thermal dissipation, HP mounted the chips on special printed circuit boards called finstrates. These boards featured a copper sheet approximately one millimetre thick at their core, acting as a heat sink to keep the processor within safe operating temperatures during use.
Where it went
The FOCUS CPU served as the heart of the HP 9000 Series 500 workstations and servers. These machines were initially launched as the HP 9020 and were sometimes unofficially referred to as the Series 600. The processor worked in conjunction with an I/O Processor, a Memory Controller, a clock unit, and several 128-kilobit dynamic RAM devices. This combination formed the basis of the system architecture, targeting technical computing tasks that required more power than 16-bit systems could provide but did not need large multi-chip mainframes.
Why it matters
By delivering a fully 32-bit architecture on a single chip, the FOCUS marked a turning point in microprocessor development. It demonstrated that complex instruction sets and high bit-widths could be integrated without resorting to multi-chip assemblies. This achievement pressured competitors to accelerate their own single-chip 32-bit developments. The success of the HP 9000 Series 500 helped establish Hewlett-Packard as a major player in the workstation market, bridging the gap between minicomputers and personal computing environments for professional users.
Questions people ask about HP FOCUS
What makes the HP FOCUS historically significant?
It was the first commercial microprocessor to provide full 32-bit processing capabilities on a single chip. Before its 1982 launch, competitors used multiple chips or mixed bit-widths to achieve similar performance levels.
How did HP manage the heat generated by the chip?
The high density of the NMOS-III process caused heat issues. HP solved this by mounting the chips on finstrates, which are printed circuit boards with a one millimetre copper sheet at the core to dissipate heat.
What type of architecture does the FOCUS use?
It uses a stack architecture inspired by the HP 3000 series. It has over 220 instructions and no general purpose programmer-visible registers, relying instead on internal 32-bit data paths and a microcode control store.
Good reading and sources
The facts on this page come from the Wikipedia article "HP Focus", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like HP FOCUS
All CPUs and microprocessors
🇺🇸 United StatesAlpha 21064
First commercial microprocessor implementing the Alpha instruction set architecture.CPU · Other · 1992