News
IndustryTSMC’s grip on advanced chipmaking will face competitionIndustryCadence joins European Chip Design Platform to support semiconductor startups and SMEsMaking chipsMarc Hijink on ASML’s Culture, Supply Chain, and GeopoliticsProcessorsIntel's post-Nova Lake CPUs take shape as Razor Lake desktop and laptop variants surfaceAI chipsHow Google’s New AI Chip Software Helps It Battle NvidiaIndiaMore IC Packaging Plants Emerge In IndiaIndustryUS Tightens China AI Chip Access as Nvidia, TSMC and Semiconductor Stocks SlideDesignAxelera AI moves into HPC with TitaniaMaking chipsChinese envoy says chip equipment export curbs threaten EU-China trade thawIndiaSEMICON India 2026 Day 2 Sees 25 MoUs, Strategic Collaborations Across Semiconductor Value ChainIndustryTSMC’s grip on advanced chipmaking will face competitionIndustryCadence joins European Chip Design Platform to support semiconductor startups and SMEsMaking chipsMarc Hijink on ASML’s Culture, Supply Chain, and GeopoliticsProcessorsIntel's post-Nova Lake CPUs take shape as Razor Lake desktop and laptop variants surfaceAI chipsHow Google’s New AI Chip Software Helps It Battle NvidiaIndiaMore IC Packaging Plants Emerge In IndiaIndustryUS Tightens China AI Chip Access as Nvidia, TSMC and Semiconductor Stocks SlideDesignAxelera AI moves into HPC with TitaniaMaking chipsChinese envoy says chip equipment export curbs threaten EU-China trade thawIndiaSEMICON India 2026 Day 2 Sees 25 MoUs, Strategic Collaborations Across Semiconductor Value Chain
EveryChip
Millipede memory

Millipede memory

IBM experimental non-volatile memory using atomic force probes

Millipede memory is an experimental non-volatile storage technology developed by IBM. It uses arrays of nanoscopic probes to read and write data on a polymer surface, aiming for high density. Despite prototypes shown in 2005, it never reached commercial production due to advances in competing drives.

Share on WhatsApp

  • Uses atomic force probes to read and write data
  • Stores bits as physical pits in a polymer film
  • Initial prototype held 500 megabits of data
  • Promised density over 1 terabit per square inch
  • Never released as a commercial product

What it is

Millipede memory is a form of non-volatile computer memory developed by IBM. It stores data as physical pits on a thin polymer film rather than using magnetic fields or electrical charges. The system employs hundreds of nanoscopic atomic force probes to read and write these pits in parallel. This approach aimed to combine the high storage density of hard drives with the small physical footprint of flash media. Although it promised densities exceeding one terabit per square inch, the technology remained experimental and did not become a commercial product.

How it came about

IBM first demonstrated an early prototype in 2003. This device used a grid of 32 by 32 probes to store 500 megabits of data. The company planned a commercial launch for 2005 but delayed it. At the CeBIT Expo in 2005, IBM showed an improved version with a 64 by 64 probe array. This newer design increased capacity significantly and targeted a 2007 release. However, rapid improvements in hard drive and flash memory technologies outpaced Millipede development. By 2015, no commercial product had emerged, and active pursuit of the technology appears to have ceased.

Inside the chip

The core mechanism involves a sled coated with a thermo-active polymer. Thousands of silicon cantilevers, each ending in a sharp probe, sit above this surface. To write data, a probe heats up to around 400 degrees Celsius, softening the polymer. Erasing involves heating the area again so surface tension flattens the pit. Reading works by dragging a heated probe across the surface. If the tip falls into a pit, it cools faster due to increased contact, changing its electrical resistance. This change signals a binary value.

How it was made

The probes are manufactured using surface micromachining techniques on silicon wafers. Each cantilever is made entirely of silicon. The data storage medium is a thin film of acrylic glass or similar polymer deposited on a carrier sled. Early chips measured 3 mm by 3 mm and contained 1,024 probes. Later prototypes expanded to a 7 mm by 7 mm sled with 4,096 probes. The manufacturing process allows for extremely small pit sizes, down to roughly 10 nanometers, enabling high areal density without traditional magnetic recording heads.

Where it went

Millipede memory was intended to replace magnetic hard drives in computers and consumer electronics. Its goal was to offer the non-volatility of flash memory with much higher storage density. Potential applications included laptops and portable devices where space is limited but large capacity is needed. The parallel nature of the probe array allowed for high aggregate data transfer speeds, potentially reaching gigabytes per second. However, because it never reached the market, it was not used in any final consumer products.

Versions and family

The initial experimental device featured a 32 by 32 grid of probes. It stored 62.5 megabytes of data with a density of 200 gigabits per square inch. A subsequent variant demonstrated in 2005 used a 64 by 64 grid. This version achieved a density of 800 gigabits per square inch. Theoretical models suggested that scaling pit sizes further could push density past one terabit per square inch. No other major variants or commercial siblings were produced before development stalled.

Why it matters

Millipede memory demonstrated the potential of nanoelectromechanical systems for data storage. It showed that mechanical probes could operate at high speeds and densities. The project highlighted the challenges of competing with rapidly evolving magnetic and flash technologies. While it did not change the industry directly, it contributed to research in thermal scanning probe lithography. The concept remains a notable example of alternative storage architectures explored during the mid-2000s.

Problems and reception

The technology was received with interest due to its high theoretical density. Demonstrations at trade shows like CeBIT showcased its potential. However, the lack of a commercial release led to diminished attention. Competing technologies such as heat-assisted magnetic recording advanced quickly, reducing the need for Millipede. There are no records of widespread bugs or recalls since no product was sold. The primary reception was scientific curiosity followed by industry shift toward other solutions.

Questions people ask about Millipede memory

How does Millipede memory store data?

It stores data by creating tiny physical indentations, or pits, on a thin polymer surface. An array of nanoscopic probes heats up and presses into the material to write these bits. The presence or absence of a pit represents binary data.

Why was it called Millipede memory?

The name comes from the layout of the read/write heads. The probes are arranged in a dense grid, such as 32 by 32 or 64 by 64. This arrangement resembles the many legs of a millipede animal.

Is Millipede memory available to buy?

No, it is not available commercially. IBM demonstrated prototypes in 2003 and 2005 but never launched a product. Advances in hard drive and flash memory technologies made it unnecessary for the market.

What is the storage density of Millipede?

Early prototypes achieved 200 gigabits per square inch. Later designs reached 800 gigabits per square inch. Theoretical limits suggested it could exceed one terabit per square inch, which was very high for its time.

Good reading and sources

Where this page comes from

The facts on this page come from the Wikipedia article "Millipede memory", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.

It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.

Photo credits on this page

The small pictures above come from Wikimedia Commons under free licences. Some are cropped to fit.

The weekly digest

Every Monday: the chip of the day, new pages on EveryChip, and the conferences and anniversaries of the week ahead.