ROMP
IBM RISC microprocessor for workstations and office systems
The ROMP is a 32-bit reduced instruction set computer microprocessor designed by IBM in the late 1970s. It became the first industrial RISC chip, powering the IBM RT PC workstation and later academic systems.
- First industrial RISC microprocessor, ready in 1981
- Contains 45,000 transistors on a 2 µm NMOS process
- Powered the IBM RT PC workstation launched in 1986
- Uses a three-stage pipeline for instruction execution
- Supported a 40-bit virtual address space via Rosetta MMU
What it is
The ROMP is a 32-bit reduced instruction set computer microprocessor created by IBM. It was developed during the late 1970s as a collaboration between IBM Research and the Office Products Division. This chip served as the central processing unit for the IBM RT PC, a technical workstation launched in 1986. It represents one of the earliest commercial implementations of RISC architecture, moving away from complex instruction sets to improve performance through simpler operations.
How it came about
Architectural work started in spring 1977, evolving from the IBM 801 research project. The team focused on cost reduction, initially using a 24-bit design before switching to 32 bits. Prototype chips were ready by early 1981, making it the first industrial RISC processor. Commercial release waited until 1986 due to ambitious software plans for the RT PC operating system, which featured advanced virtualization capabilities uncommon for small systems at that time.
Inside the chip
The processor uses a scalar design with a three-stage pipeline. It fetches and decodes instructions in the first stage, executes them in the second, and writes results back in the third. Sixteen 32-bit general purpose registers support rapid data handling. Most register-to-register instructions complete in a single cycle. A companion chip called Rosetta handles memory management, providing address translation and buffering. The architecture supports a 40-bit virtual address space divided into segments.
How it was made
IBM manufactured the original ROMP using a 2 micrometre silicon-gate NMOS process with two metal layers. The die contains 45,000 transistors and measures 7.65 by 7.65 millimetres. The accompanying Rosetta memory management unit holds 61,500 transistors on a slightly larger die. Both chips sit in 135-pin ceramic pin grid arrays. A later CMOS version, known as ROMP-C, was developed for improved efficiency and appeared in subsequent systems.
Where it went
The primary commercial application was the IBM RT PC, marketed as an engineering and scientific workstation. Although initially planned as a personal computer to replace Intel-based models, it found its niche in technical computing. The chip also powered the IBM 6152 Academic System via a coprocessor board. IBM Research utilized the processor in experimental multiprocessor projects, including the RP3 and ACE systems, to test scalable shared-memory architectures.
Versions and family
The initial version used NMOS technology. A later CMOS variant, called ROMP-C, offered better power characteristics and was paired with Rosetta-C. These updated chips appeared in later models of the RT PC and the IBM 6152 Academic System. The architecture evolved from an earlier 24-bit concept to the final 32-bit implementation, maintaining compatibility with the core RISC principles established during development.
Why it matters
ROMP stands as the first industrial RISC microprocessor, predating many well-known competitors. It demonstrated that simplified instruction sets could deliver high performance in commercial products. Its use in the RT PC introduced advanced virtualization concepts to the workstation market. The design influenced subsequent IBM processor developments and proved the viability of RISC architecture in real-world computing environments beyond mainframes.
Questions people ask about ROMP
What does ROMP stand for?
It stands for Research OPD Miniprocessor. The name reflects the collaboration between IBM Research and the Office Products Division during its development in the late 1970s.
Was the ROMP used in personal computers?
It was originally intended for the IBM RT PC, which was planned as a personal computer. However, the RT PC was repositioned as an engineering and scientific workstation before its 1986 launch.
How many transistors does the ROMP have?
The original NMOS version of the ROMP contains 45,000 transistors. It was manufactured using a 2 micrometre silicon-gate process and measures approximately 58 square millimetres.
What is the Rosetta chip?
Rosetta is a companion memory management unit developed by IBM for the ROMP. It handles address translation, provides a translation lookaside buffer, and manages store buffering for the processor.
Good reading and sources
The facts on this page come from the Wikipedia article "IBM ROMP", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like ROMP
All CPUs and microprocessorsMore from IBM
All of them
WorldRAMDAC
Chip converting digital color data to analog signals for monitorsAnalog · 1987
🇺🇸 United StatesI386
First 32-bit x86 microprocessor by IntelCPU · x86 · 1985