ZN414
Single-chip AM radio receiver integrated circuit
Ferranti introduced the ZN414 in 1972 as an affordable single-chip AM radio receiver. It enabled hobbyists to build functional radios with minimal external parts using a Tuned Radio Frequency design.
- Launched by Ferranti in 1972
- Uses Tuned Radio Frequency design
- Operates on a single 1.5 V cell
- Draws only 0.5 mA maximum current
- Modern equivalent TA7642 is still made
What it is
The ZN414 is an integrated circuit that functions as a complete AM radio receiver on a single silicon die. Ferranti launched this component in 1972 to provide a low-cost solution for radio reception. It became a favourite among electronics enthusiasts because it required very few additional parts to operate. The chip implements a Tuned Radio Frequency architecture, which is less complex than standard superheterodyne designs. This simplicity allowed the entire radio circuit to fit within a tiny three-pin package.
How it came about
Engineers at Ferranti designed the chip using Collector Diffusion Isolation, a technique developed from Bell Labs research. Ferranti commercialised this process in the United Kingdom. The company initially supplied the device in a metal TO-18 case. GEC-Plessey later acted as a second source, producing the chip alongside Ferranti. Subsequent versions from Ferranti, such as the ZN414Z, switched to plastic TO-92 packaging. The original family is no longer in production, though modern equivalents remain available.
Inside the chip
The internal circuitry relies on a Tuned Radio Frequency approach rather than the more common superheterodyne method. This choice reduces component count significantly. The chip operates with a supply voltage between 1.1 V and 1.6 V, making it suitable for a single 1.5 V cell. It draws a maximum current of 0.5 mA. The high input impedance allows it to work well with valve radio transformers. Automatic gain control is managed via a resistor connected to the input coil.
How it was made
Manufacturing used the Collector Diffusion Isolation process, which was novel at the time. Ferranti developed this method for commercial use in the UK. The initial version came in a three-pin metal TO-18 package resembling a transistor. Later iterations and those from GEC-Plessey utilized the plastic TO-92 encapsulation. Modern clones like the TA7642 are still produced today, while the original ZN41x series has been discontinued.
Where it went
Hobbyists frequently used the chip to build compact radios, often called matchbox radios. It requires only a crystal earpiece and a battery to function. The device can also serve as an intermediate frequency amplifier in other radio designs. Its upper frequency limit is approximately 3 MHz, so it does not support shortwave bands. Some builders combine it with an SA612 mixer to create more complex receivers.
Versions and family
The ZN415 and ZN416 are later variants that feature eight pins and include a built-in amplifier. These models can drive headphones or small speakers directly and draw up to 5 mA. Modern equivalents include the MK484, TA7642, YS414, and LMF501T. The TA7642 is currently manufactured and appears in some combination AM/FM radios. Pin configurations vary among clones, with the YS414 swapping output and ground pins.
Why it matters
The ZN414 demonstrated that a full radio receiver could exist on a single chip. It made radio construction accessible to students and hobbyists due to its low cost and simplicity. The use of Collector Diffusion Isolation helped establish Ferranti’s manufacturing capabilities. Its design influenced later single-chip radio solutions. The availability of modern clones ensures the architecture remains relevant for educational and simple consumer applications.
Questions people ask about ZN414
What kind of radio circuit does the ZN414 use?
It uses a Tuned Radio Frequency design. This approach is simpler than the superheterodyne circuits found in most modern radios. The simplicity allows the entire receiver to fit into a small three-pin package.
Can I use the ZN414 for shortwave radio?
No, the chip has an upper operating limit of about 3 MHz. This frequency range covers standard AM broadcast bands but does not extend into the shortwave spectrum. It is better suited for local AM stations.
Are there modern chips that replace the ZN414?
Yes, several equivalents exist such as the MK484, TA7642, YS414, and LMF501T. The TA7642 is currently manufactured and used in some radios. Note that pinouts may differ between these clones.
Good reading and sources
The facts on this page come from the Wikipedia article "ZN414", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.