ST200
VLIW processor cores for embedded media processing
The ST200 is a family of very long instruction word processor cores developed by Hewlett-Packard Laboratories and STMicroelectronics. Designed for embedded media tasks, these chips use the Lx architecture to handle digital video and other data-intensive workloads efficiently.
- Jointly developed by HP Labs and STMicroelectronics
- Uses VLIW Lx architecture for media processing
- Over 70 million processors shipped by 2009
- Supports Linux kernel compilation via Open64
- ST231 variant includes a memory management unit
What it is
The ST200 is a series of processor cores built for embedded media processing. It uses a very long instruction word design, which allows multiple operations to execute in parallel within a single clock cycle. Hewlett-Packard Laboratories and STMicroelectronics jointly created the underlying Lx technology. These cores are found in systems-on-chip used for digital video and other consumer electronics applications. The architecture focuses on efficiency for specific media tasks rather than general-purpose computing.
How it came about
Hewlett-Packard Laboratories and STMicroelectronics collaborated to develop the Lx architecture. The project involved co-located teams working together for about two years. Paolo Faraboschi from HP led the architecture design, while Fred Homewood from ST handled the microarchitecture. Other key contributors included Geoffrey Brown, Giuseppe Desoli, and Gary Vondran from HP, along with Trefor Southwell, Tony Jarvis, and Alex Starr from ST. This cross-company effort produced the first core, the ST210, marking the initial product based on this joint technology.
Inside the chip
The Lx architecture uses a symmetric clustered design where clusters exchange data via explicit send and receive commands. Each cluster can process up to four instructions per cycle. This limit includes one control instruction, one memory operation, and two multiply instructions. Arithmetic works on integers using a 64-entry general register file and an 8-entry branch register file. Register zero always reads as zero, while register 63 serves as the link register. The design supports partial predication to reduce conditional branches. All instructions are fully pipelined, with most latencies lasting only a single cycle.
How it was made
STMicroelectronics manufactured the ST200 cores. The family includes the ST210, ST220, and ST231 models. By 2009, the company had shipped over 40 million systems-on-chip containing these processors. Since many chips hold multiple cores, such as the STi7200 with four ST231s, the total processor count exceeded 70 million units.
Where it went
These processors primarily serve embedded media processing roles. They are widely used in digital video applications within consumer electronics. Systems-on-chip featuring ST200 cores handle tasks like video decoding and playback. The ST231 variant includes a memory management unit, allowing it to function as a host processor in more complex systems. The high shipment volumes indicate their prevalence in set-top boxes and similar multimedia devices.
Versions and family
The family consists of three main cores. The ST210 was the first implementation. The ST220 added an execute stage to raise operating frequency, though this increased maximum latency to three cycles. The ST231 introduced register scoreboarding and improved multiplication capabilities for integer and fractional data. It also added a memory management unit. These incremental changes allowed the later variants to support more demanding hosting roles while maintaining the core Lx structure.
Why it matters
The ST200 family achieved significant commercial success in the embedded market. Shipping tens of millions of units demonstrated the viability of the Lx architecture for media tasks. The collaboration between HP and ST produced a design that balanced performance with power efficiency for consumer devices. The availability of compilers based on Open64 and GNU tools facilitated software development, including Linux kernel support, which broadened its appeal to developers working on embedded systems.
Questions people ask about ST200
What is the ST200 used for?
The ST200 family is designed for embedded media processing. It is commonly found in systems-on-chip for digital video applications, such as set-top boxes and other consumer electronics devices that require efficient data handling.
Who developed the ST200 architecture?
The Lx architecture behind the ST200 was jointly developed by Hewlett-Packard Laboratories and STMicroelectronics. Key architects included Paolo Faraboschi from HP and Fred Homewood from ST, who led the cross-company team.
Can the ST200 run Linux?
Yes, the ST200 can run Linux. Compilers based on Open64 technology were improved to support full C++ compliance and GNU extensions, allowing the Linux kernel to be compiled for these processors.
Good reading and sources
The facts on this page come from the Wikipedia article "ST200 family", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.