
SPARC64 V
Single-core SPARC V9 server microprocessor by Fujitsu
Fujitsu designed the SPARC64 V, a single-core SPARC V9 microprocessor, with production starting in late 2001. It served as the foundation for subsequent server and supercomputer chips, offering high clock speeds for its time.
- Clock speeds range from 1.10 GHz to 1.35 GHz
- Contains 191 million transistors on a 290 mm2 die
- Fabricated using 0.13 μm silicon on insulator process
- Features four-issue superscalar out-of-order execution
- Served as basis for K computer superprocessor lineage
What it is
The SPARC64 V is a microprocessor built on the SPARC V9 instruction set architecture. Fujitsu designed this chip to power high-performance servers and later supercomputers. Production of the first units began in December 2001. It operates as a single-core processor with clock speeds ranging from 1.10 GHz to 1.35 GHz. This model established the baseline for a long line of successors, including the SPARC64 VI and VII series. It was notable for achieving the highest clock frequency among SPARC processors at its launch.
How it came about
Development initially started at HAL Computer Systems, a Fujitsu subsidiary, in the late 1990s. The original HAL design used a 0.17 μm process but was cancelled in mid-2001 when Fujitsu closed the subsidiary. Fujitsu then took over the design, shifting to a 0.13 μm manufacturing process. The first chips were fabricated in December 2001. Fujitsu presented the final design at the Microprocessor Forum in 2002. A planned 1.62 GHz version was later cancelled in favour of the SPARC64 V+ successor.
Inside the chip
This processor uses a four-issue superscalar architecture with out-of-order execution. It fetches up to eight instructions per cycle into a buffer before decoding and issuing four to reserve stations. Six execution units handle integer, address generation, and floating-point operations. The chip features separate register files for integer and floating-point data to support higher clock speeds. It includes a two-level cache hierarchy with 128 KB L1 caches and a unified L2 cache of 1 or 2 MB. A 128-bit system bus provides memory bandwidth.
How it was made
Fujitsu manufactured the SPARC64 V using a 0.13 μm complementary metal–oxide–semiconductor process. The fabrication utilized silicon on insulator technology with eight layers of copper interconnect. The die contains 191 million transistors and measures 290 square millimetres. TSMC is also listed as a manufacturer in associated data. The physical layout allows for efficient heat dissipation relative to its performance class.
Where it went
Fujitsu deployed these chips in their PRIMEPOWER server lineup. The architecture formed the basis for later processors used in SPARC Enterprise M-Series servers, developed in collaboration with Sun Microsystems and later Oracle. Derivatives of this design lineage eventually powered supercomputers such as the K computer and the PRIMEHPC FX10 series. It served primarily in enterprise data centres and high-performance computing environments.
Versions and family
The SPARC64 V+ followed this model, offering higher clock speeds up to 2.16 GHz and larger L2 caches. Subsequent iterations included the dual-core SPARC64 VI and the quad-core SPARC64 VII. The VIIIfx variant was designed specifically for supercomputing with eight cores. The SPARC64 XII represents the latest server processor in this family as of October 2017. Each successor introduced improvements in core count, threading, and cache capacity.
Why it matters
At its introduction, the SPARC64 V held the record for the highest clock frequency among 64-bit server processors. It also achieved the highest SPEC rating for any SPARC processor at that time. Its design principles influenced subsequent generations of Fujitsu hardware. The chip enabled Fujitsu to compete effectively in the high-end server market during the early 2000s. It laid the groundwork for Japan's advancements in supercomputing infrastructure.
Questions people ask about SPARC64 V
What is the clock speed of the SPARC64 V?
The SPARC64 V operates at frequencies between 1.10 GHz and 1.35 GHz. Fujitsu supplied slightly higher voltage in some servers to enable the maximum 1.35 GHz operation.
How many cores does the SPARC64 V have?
The SPARC64 V is a single-core microprocessor. Later models in the family, such as the SPARC64 VI and VII, introduced multiple cores and simultaneous multithreading capabilities.
What manufacturing process was used for this chip?
Fujitsu fabricated the SPARC64 V using a 0.13 μm CMOS process with silicon on insulator technology. It featured eight levels of copper interconnects on the die.
Good reading and sources
- Fujitsu guns for faster supercomputers with new chipPCWorld, Article
- Japanese ‘K’ Computer Is Ranked Most Powerful (Published 2011)The New York Times, Article
- Inside Japan’s Future Exascale ARM SupercomputerThe Next Platform, Article
The facts on this page come from the Wikipedia article "SPARC64 V", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like SPARC64 V
All CPUs and microprocessors
🇺🇸 United StatesAlpha 21064
First commercial microprocessor implementing the Alpha instruction set architecture.CPU · Other · 1992
More from Fujitsu
All of them
WorldGeForce 3 series
Third-generation Nvidia GPU with programmable shadersGPU · GPU architecture · 2001
🇯🇵 JapanSPARC64 V
Fujitsu SPARC V9 server microprocessor from 2001CPU · SPARC · 2001
🇺🇸 United StatesTransmeta Crusoe
Low-power x86 microprocessor using software translationCPU · x86 · 2000