NE5532
Dual low-noise operational amplifier for professional audio
The NE5532 is a dual bipolar operational amplifier introduced by Signetics in 1979. It became the industry standard for professional audio due to its low noise and distortion, outperforming discrete circuits. It remains in mass production as a generic component.
- Introduced by Signetics in 1979 for audio use
- Industry standard for professional audio for decades
- Dual bipolar op amp with internal compensation
- Low distortion below 0.0005% in inverting mode
- Remains in mass production as a generic part
What it is
The NE5532 is a dual monolithic bipolar operational amplifier designed for audio applications. Signetics introduced it in 1979. It features internal compensation and is available only in a dual configuration. The chip became the standard for professional audio equipment because it offered lower noise and distortion than the discrete class A circuits used previously. It remains in widespread production today as a generic component, with manufacturing handled by several semiconductor firms including Texas Instruments and Fairchild Semiconductor.
How it came about
Signetics originally developed the device. Philips Semiconductors later sold it under the name TDA1034 before adopting the current designation. The amplifier arrived at a time when professional audio gear relied on discrete components. Its performance surpassed those older designs, leading to rapid adoption in mixing consoles and recording hardware. For nearly thirty years, it held the top spot for audio performance until newer chips like the LM4562 appeared in 2007.
Inside the chip
The circuit uses bipolar transistors for the signal path, with a single JFET in the bias generator. It contains two differential stages followed by a voltage amplification stage and a class B output follower. Four internal capacitors provide frequency compensation. The input stage uses NPN transistors, which draw bias current into their bases. This can cause small voltage drops across input resistors. Back-to-back diodes protect the inputs from high currents, though large transient signals may still cause distortion. The chip is intended for linear operation and should not be used as a comparator.
How it was made
Manufacturers produce the NE5532 in 8-pin PDIP, SO, and SOIC packages. It is a fully bipolar design with internal compensation capacitors. The absolute maximum supply voltage rating is 44 V, which is higher than the 36 V common in many other op amps. However, the plastic package can become warm at 34 V due to the 4–5 mA current draw per amplifier. Some manufacturers have recently altered the internal topology to limit the voltage handling to 36 V.
Where it went
This amplifier is found in professional audio equipment such as mixing consoles, preamplifiers, and recording interfaces. Its low total harmonic distortion makes it suitable for high-fidelity signal processing. Designers often use it in inverting configurations to minimize distortion. It requires careful power supply decoupling with capacitors near the pins to prevent high-frequency oscillation. While it can handle high source impedances, performance degrades if the impedance exceeds 10 kOhm.
Versions and family
The NE5534 is a single-channel version of the same design. It is not fully compensated internally, making it unstable at unity gain without an external capacitor. The 5534 offers a higher slew rate of 13 V/μs compared to 9 V/μs for the 5532. A dual uncompensated version, the 5533, was also produced but has been discontinued. The 5532 remains more popular than the single-channel variant due to its ease of use and stability.
Why it matters
The NE5532 set a new benchmark for audio integrated circuits. It replaced discrete transistor circuits in many professional studios. Douglas Self noted that most recorded music has passed through multiple instances of this chip. Its combination of low noise, low distortion, and robustness made it a staple in analog audio design for decades. Even after superior chips emerged, it remained a common choice for cost-effective and reliable audio paths.
Problems and reception
Engineers value the chip for its predictable performance and low distortion in the audio band. It does not suffer from output phase inversion when overdriven, unlike some FET-input alternatives. However, users must manage bias currents and power supply decoupling carefully. Failure to decouple the supply pins can lead to erratic oscillation. Despite these requirements, it is regarded as a robust and versatile component for linear audio applications.

Questions people ask about NE5532
What is the NE5532 used for?
It is a dual operational amplifier used primarily in professional audio equipment. Its low noise and distortion make it ideal for mixing consoles, preamps, and signal processing circuits where high fidelity is required.
Is the NE5532 stable at unity gain?
Yes, the NE5532 is internally compensated and stable at unity gain. Its single-channel counterpart, the NE5534, is not fully compensated and requires an external capacitor to remain stable at low gains.
What is the maximum supply voltage?
The absolute maximum rating is 44 V. However, practical use often limits this to 34 V or less to avoid overheating the plastic package. Some recent versions have lowered this limit to 36 V.
Why does the NE5532 need decoupling capacitors?
It is sensitive to power supply noise. Without a 0.1 μF capacitor connected close to the supply pins, the chip may oscillate at high frequencies. This oscillation causes distortion even if it does not appear directly at the output.
Good reading and sources
The facts on this page come from the Wikipedia article "NE5532", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like NE5532
All analog, power and mixed-signal
🇺🇸 United StatesSP0256
Voice synthesis chip by General Instrument from the early 1980sAnalog · Other · 1981
More from Signetics
All of them
🇺🇸 United StatesTMS9918
Texas Instruments video display controller from 1979Analog · 1979
🇺🇸 United StatesTMS6100
Serial mask ROM for speech synthesis data storageMemory · Other · 1978