DDR3 SDRAM
Third-generation double data rate memory standard released in 2007
DDR3 SDRAM is a high-bandwidth memory interface standard developed by JEDEC and released in 2007. It succeeded DDR2 by doubling data transfer rates through an eight-burst prefetch buffer, enabling speeds up to 2133 MT/s while reducing power consumption.
- Released in 2007 by JEDEC as successor to DDR2
- Transfer rates range from 800 to 2133 MT/s
- Uses 1.5 V standard voltage with 1.35 V low-power option
- Features an eight-burst-deep prefetch buffer
- Supports module capacities up to 16 GB
What it is
DDR3 SDRAM is a type of synchronous dynamic random-access memory that uses a double data rate interface. Released in 2007 by the JEDEC standards body, it serves as the third generation of DDR technology. The standard defines how memory modules communicate with processors, offering higher bandwidth than its predecessor DDR2. It is widely used in personal computers and servers, providing a balance of speed and power efficiency for general computing tasks.
How it came about
Development began around 2002, with Samsung introducing the first prototype chip in February 2005. This initial sample had a capacity of 512 megabits and a bandwidth of 1.066 gigabits per second. JEDEC officially launched the standard in 2007. Market adoption was driven by new processors from Intel and AMD that required or recommended the faster memory. Sales were projected to overtake DDR2 by late 2009, a prediction supported by industry analysts at the time.
Inside the chip
The core improvement in DDR3 is an eight-burst-deep prefetch buffer, which is double the size of the DDR2 buffer. This allows the memory to transfer data at twice the rate of the previous generation. Modules operate using an I/O clock between 400 and 1066 MHz, achieving transfer rates from 800 to 2133 megatransfers per second. The standard uses Stub Series Terminated Logic signaling at 1.5 volts, with low-voltage variants available. Latencies are numerically higher due to faster clock cycles, but actual time intervals remain similar to DDR2.
How it was made
JEDEC defines the electrical and mechanical specifications for DDR3 components. Standard dual-inline memory modules have 240 pins, while small outline modules for laptops have 204 pins. A physical notch prevents insertion into incompatible DDR2 slots. The standard supports chip capacities up to 8 gigabits, allowing for 16-gigabyte modules. Manufacturing involves standard semiconductor processes, with some manufacturers using dual-gate transistors to reduce current leakage and improve power efficiency.
Where it went
This memory type became essential for high-performance desktops and workstations. Intel Core i7 processors, released in 2008, required DDR3 for operation. AMD Phenom II processors also adopted the standard. It is found in servers using error-correcting code modules for reliability. Laptops benefit from low-voltage DDR3L variants, which extend battery life. The high bandwidth supports graphics-intensive applications by facilitating fast data movement between framebuffers.
Versions and family
Several extensions exist beyond the base standard. DDR3L operates at 1.35 volts for lower power use, while DDR3U runs at 1.25 volts. Error-correcting code modules add reliability for servers. Registered and load-reduced modules buffer signals to support larger memory capacities in enterprise systems. Intel introduced eXtreme Memory Profile specifications to allow enthusiasts to run memory at speeds higher than the official JEDEC standards.
Why it matters
DDR3 established a new baseline for system memory performance in the late 2000s. It enabled higher data throughput for multi-core processors that demanded more bandwidth. The transition from DDR2 helped drive the adoption of integrated memory controllers in central processing units. Its power-saving features influenced mobile computing designs. The standard remained dominant until the arrival of DDR4 in 2014, serving as the primary memory technology for nearly a decade.

Questions people ask about DDR3 SDRAM
Is DDR3 compatible with DDR2 slots?
No, DDR3 modules are not backward compatible with DDR2. They have different signaling voltages, timings, and a differently placed physical notch on the connector. Forcing a DDR3 module into a DDR2 slot can damage both the memory and the motherboard.
What is the main difference between DDR3 and DDR2?
DDR3 transfers data at twice the rate of DDR2 by using an eight-burst prefetch buffer instead of four. It also operates at lower voltages, typically 1.5 V compared to 1.8 V for DDR2, which reduces power consumption and heat generation in systems.
What does DDR3L mean?
DDR3L stands for DDR3 Low Voltage. It operates at 1.35 V instead of the standard 1.5 V. This variant is designed for devices where power savings are critical, such as laptops and systems using mobile processors, though it remains compatible with standard DDR3 voltage levels.
Good reading and sources
The facts on this page come from the Wikipedia article "DDR3 SDRAM", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like DDR3 SDRAM
All memory chips
🇺🇸 United States3D XPoint
Non-volatile memory from Intel and Micron, sold as OptaneMemory · 2015