AA+ Chipset
Planned low-cost Amiga graphics and sound chipset by Commodore
Commodore International announced the AA+ chipset in 1992 as a budget-friendly upgrade for Amiga computers. It aimed to fix limitations in the existing AGA architecture while keeping costs low, but the project was cancelled when the company went bankrupt before any hardware was built.
- Announced in 1992 as a low-cost Amiga chipset
- Cancelled before production due to Commodore bankruptcy
- Featured two chips with 100,000 transistors each
- Supported 16-bit chunky pixel graphics mode
- Offered 8x memory bandwidth increase over ECS
What it is
The AA+ chipset was a proposed set of custom integrated circuits designed by Commodore International. Announced in 1992, it intended to serve as a cost-effective successor to the Advanced Graphics Architecture (AGA) found in Amiga computers. The design focused on improving performance for lower-end systems without the high expense of the concurrent AAA project. It promised better graphics modes, faster data transfer, and improved peripheral support. However, the chipset never reached production. Commodore declared bankruptcy in 1994, cancelling all ongoing hardware projects including AA+ and AAA. The design remained only on paper and in internal specifications.
How it came about
Commodore recognized in 1991 that their high-end AAA chipset would be too expensive for budget machines. They released AGA in 1992 to stay competitive but knew it had limitations. In January 1993, Lew Eggebrecht, Vice President of Engineering, presented AA+ at Devcon in Orlando. He described it as a pragmatic fix for known issues like slow serial ports and lack of chunky pixel support. The goal was to reduce costs while adding features missed in AGA. Dave Haynie, a lead designer, later confirmed that no actual silicon design work began due to financial constraints. The project ended when Commodore folded.
Inside the chip
The architecture relied on two custom chips, each containing 100,000 transistors. This was a reduction from the three chips used in earlier Amiga generations. The design maintained compatibility with AGA registers but added a 128-bit memory bus for eight times the bandwidth of the Enhanced Chip Set (ECS). It supported a 57 MHz pixel clock, allowing 800 by 600 resolution at 72 Hz. A key feature was 16-bit chunky pixel mode, though 8-bit color remained planar to save cost. The blitter unit offered double the performance of AGA by running at 14 MHz, potentially breaking compatibility with some older software. Sound improvements included 16-bit samples, possibly via an integrated digital signal processor.
How it was made
No physical chips were manufactured. The design specified two integrated circuits in 160 to 280 pin packages. Each chip was planned to hold 100,000 transistors, totaling 200,000 for the set. This count was significantly lower than the 750,000 transistors planned for the four-chip AAA set. The system required 60 ns DRAM and supported up to 8 MB of Chip RAM. Standard memory configuration for target systems was expected to be 4 MB or 8 MB. The fabrication process and specific foundry were never selected because the project was cancelled before entering the production phase.
Where it went
The chipset targeted low-end Amiga computers similar to the A1200 and consoles like the CD32. It aimed to provide a platform for AmigaOS 4, which included support for retargetable graphics. By enabling chunky pixels and higher resolutions, it would have improved performance for graphical applications and games. The design also addressed peripheral bottlenecks, offering full-speed support for high-density floppy drives and buffered serial ports. These improvements were intended to make Amiga systems more competitive with personal computers of the early 1990s that typically shipped with 8 MB of RAM.
Versions and family
AA+ was the budget counterpart to the Advanced Amiga Architecture (AAA) chipset. While AAA targeted high-end 64-bit systems with four or six chips, AA+ used only two. Another related project was Hombre, a 64-bit architecture also cancelled. Access Innovations later reused the AA+ name for its BoXeR chipset, which was compatible with AGA. The AA+ design itself had no produced variants or successors within Commodore. It was intended to support various 32-bit Motorola 680x0 processors, including the 68020 and 68EC030.
Why it matters
The cancellation of AA+ marked the end of Commodore's in-house chipset development. Had it been released, it might have extended the life of the Amiga platform by providing a modern, cost-effective foundation for new models. The design choices, such as keeping 8-bit color planar, reflected the tight financial constraints of the company. The reuse of the name by Access Innovations shows continued interest in Amiga-compatible hardware after Commodore's collapse. However, the original AA+ remains a notable example of unrealized technology from the final years of the company.
Problems and reception
Details about AA+ were shared publicly by engineering leadership in 1993. Lew Eggebrecht framed it as a practical solution to existing flaws. Enthusiasts and developers noted the potential for improved graphics and peripheral handling. However, skepticism existed regarding the timeline and financial health of Commodore. Since no hardware was ever built, there were no user reviews or bug reports. The reception is largely historical, viewed as a missed opportunity to modernize the Amiga line before the company's bankruptcy.
Questions people ask about AA+ Chipset
Was the AA+ chipset ever sold to consumers?
No, the AA+ chipset was never manufactured or sold. It existed only as a design concept on paper. Commodore International cancelled the project along with all other new hardware developments when the company declared bankruptcy in 1994.
How did AA+ differ from the AAA chipset?
AA+ was designed for low-end systems using two chips, while AAA targeted high-end machines with four or six chips. AA+ focused on cost reduction and AGA compatibility, whereas AAA was a radical new architecture with significantly higher transistor counts and performance capabilities.
What graphics improvements did AA+ offer?
It introduced 16-bit chunky pixel mode and a 57 MHz pixel clock. This allowed resolutions like 800 by 600 at 72 Hz. It also increased memory bandwidth eight times compared to the older ECS, supporting up to 8 MB of Chip RAM for better graphical performance.
Good reading and sources
The facts on this page come from the Wikipedia article "AA+ Chipset", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like AA+ Chipset
All graphics processors
🇺🇸 United StatesTMS34010
First programmable graphics processor integrated circuitGPU · Other · 1986
🇯🇵 JapanYamaha V9938
Video display processor for MSX2 home computersGPU · Other · 1985
🇺🇸 United StatesIntel i750
Two-chip video processor for early digital video captureGPU · Other · 1991
More from Commodore International
All of them
WorldAmiga Enhanced Chip Set
Second-generation graphics and audio chipset for Amiga computersGPU · 1990
🇺🇸 United StatesCommodore REU
External RAM expansion modules for Commodore home computersMemory · 1986