2N7000
Popular N-channel MOSFET for low-power switching
The 2N7000 is an N-channel enhancement-mode MOSFET designed for low-power switching tasks. Housed in a TO-92 package, it handles 60 volts and 200 milliamps, making it a staple component for hobbyists and engineers.
- Rated for 60 volts and 200 milliamps
- Housed in a standard TO-92 package
- High input impedance requires no gate resistor
- Popular choice for hobbyist switching circuits
What it is
The 2N7000 is an N-channel, enhancement-mode metal-oxide-semiconductor field-effect transistor (MOSFET). It serves primarily in low-power switching applications where moderate voltages and currents are present. This component is widely available and frequently recommended for hobbyist electronics kits due to its versatility and ease of use. The device is encased in a TO-92 package, a common three-legged plastic housing. It is rated to withstand up to 60 volts and can switch currents of up to 200 milliamps. Its high input impedance means it requires almost no gate current to operate, distinguishing it from bipolar junction transistors.
Inside the chip
This MOSFET operates as an enhancement-mode device, meaning it remains off until a voltage is applied to the gate. The insulated gate provides high input impedance, eliminating the need for a current-limiting resistor at the input. Unlike bipolar transistors, multiple 2N7000 units can be connected in parallel because their resistance increases with temperature, which helps balance the load. However, the gate is susceptible to static discharge damage before installation. Circuits with exposed gates often require protection resistors. When fully on, the device shows a non-zero ohmic response rather than a constant voltage drop.
How it was made
The standard 2N7000 comes in a TO-92 through-hole package. A surface-mount variant, the 2N7002, uses a TO-236 package. Some versions, such as the 2N7002K, include integrated protection diodes between the gate and source to improve robustness against electrostatic discharge.
Where it went
Engineers and hobbyists use this transistor as a switch for small lamps, motors, and relays. It is often called a FETlington due to saturation characteristics similar to Darlington transistors. The part is considered ideal for experimental circuits and hacker projects. It drives moderate loads without requiring complex drive circuitry. The high gate impedance allows direct control from logic outputs in many cases. It is also used in simple sensor circuits, such as electric field sensors, to demonstrate high impedance properties with basic components like LEDs.
Versions and family
The 2N7002 is the surface-mount version of the 2N7000. The 2N7002K adds internal gate-source protection diodes. The 2N7002AK-Q is qualified for automotive use and supports logic-level compatibility. Other similar N-channel MOSFETs include the BS170, VQ1000J, and VQ1000P, though these may have different pinouts or electrical ratings. The BS250P is noted as a P-channel equivalent. The BS170, for instance, has interchanged source and drain leads compared to the 2N7000.
Why it matters
This component has become a standard reference part in electronics education and hobbyist communities. Its widespread availability and predictable behavior make it a go-to choice for general-purpose switching. The term FETlington highlights its unique operational traits that bridge concepts between different transistor types. It simplifies circuit design by removing the need for base resistors required by bipolar devices. Its popularity ensures it is stocked by most electronic component suppliers globally.
Questions people ask about 2N7000
What is the maximum voltage and current for the 2N7000?
The 2N7000 is rated to withstand up to 60 volts. It can switch currents of up to 200 milliamps. These limits make it suitable for low-power applications such as driving small relays or LEDs.
Do I need a resistor on the gate of a 2N7000?
No, a current-limiting resistor is not required for the gate input because the insulated gate has very high input impedance. However, a protection resistor may be needed if the gate is exposed to static discharge risks.
What is the difference between the 2N7000 and 2N7002?
The 2N7000 is packaged in a through-hole TO-92 case. The 2N7002 is a surface-mount variant housed in a TO-236 package. They share similar electrical characteristics but differ in physical mounting style.
Good reading and sources
The facts on this page come from the Wikipedia article "2N7000", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like 2N7000
All analog, power and mixed-signal
🇺🇸 United StatesLM3914
Analog display driver for LED bar graphs and dot metersAnalog