Digital signal processors
The TMS320, SHARC, Hexagon and the chips that handle sound, radio and video signals. 24 chips on EveryChip so far.
A digital signal processor (DSP) is a processor tuned for handling streams of measured values: sound, radio, images and sensor readings. Its core task is the multiply-and-add, repeated millions of times a second to filter or transform a signal. Single-chip DSPs appeared around 1980, and Texas Instruments' TMS320 family of 1983 became the best known. Today DSP cores also sit inside phone SoCs, modems and hearing aids.
What makes a DSP
DSPs can do a multiplication and an addition in one cycle, using a unit called a MAC (multiply-accumulate). They have separate memories for instructions and data so both can be fetched at once, a layout called Harvard architecture, and special address modes for looping through buffers. Many use fixed-point numbers, which are cheaper than floating point, for sound and modem work.
Where they are used
DSPs filter noise in phone calls, decode music, run echo cancellation and process radar and sonar. In phones, a DSP core such as Qualcomm's Hexagon handles audio, sensors and camera tasks with little power, and has taken on AI work too. Analog Devices' SHARC chips are common in professional audio, and TI's C6000 series in base stations and imaging.
Famous DSP chips
Further reading
🇯🇵 JapanNEC μPD7720
Fixed-point digital signal processor from NECDSP · VLIW · 1981
Photo credits on this page
The small pictures above come from Wikimedia Commons under free licences. Some are cropped to fit.
- Motorola 56000: Konstantin Lanzet, CC BY-SA 3.0, source
- NEC μPD7720: Yaca2671, CC BY-SA 3.0, source
- TMS320: Raimond Spekking, CC BY-SA 4.0, source