ULLtraDIMM
Flash storage module for DDR3 memory slots
SanDisk created the ULLtraDIMM, a solid state drive that plugs into standard DDR3 memory slots. It offers consistent latency by bypassing PCIe, using ECC bits for data integrity on the bus while keeping flash protection separate.
- Connects flash storage to DDR3 memory bus
- Supports 1.35 V and 1.5 V operation
- Uses DDR3 ECC bits for bus data integrity
- Requires UEFI or BIOS updates for recognition
What it is
The ULLtraDIMM is a solid state storage device developed by SanDisk. Instead of using a PCIe connection like most flash drives, it inserts directly into a server’s DDR3 memory slot. This approach allows applications to access data with predictable and consistent latency. The device follows the JEDEC MO-269 specification for registered dual inline memory modules. It enables servers to treat high-speed flash storage as if it were part of the main memory subsystem, streamlining performance for demanding workloads.
Inside the chip
This module operates at voltages of 1.35 V or 1.5 V, supporting transfer rates from 800 MHz up to 1600 MHz. It uses the error correction code bits inherent in the DDR3 bus to check data integrity during transmission. If the central processor detects an error, the driver retries the transfer. Single symbol errors are corrected automatically, just like standard memory. However, these bus-level checks do not protect the data stored inside the flash chips. A distinct error correction method handles the flash array itself. Standard memory interleaving continues to work normally alongside these devices.
Where it went
Servers equipped with ULLtraDIMMs require specific firmware updates. The unified extensible firmware interface or basic input output system must recognise the unit as a block storage device. Without this update, the boot process may stop. Once configured, the system uses the flash storage for applications that benefit from low and deterministic latency. It is designed for enterprise environments where consistent response times are critical for software performance.

Questions people ask about ULLtraDIMM
How does the ULLtraDIMM connect to the server?
It plugs directly into a standard DDR3 RDIMM memory slot. This differs from traditional flash storage that uses PCIe connections, allowing it to sit on the memory bus for faster access.
Does it use the same error correction as RAM?
Yes, it uses DDR3 ECC bits to verify data moving across the bus. The CPU corrects single symbol errors. However, a separate scheme protects the data actually stored in the flash array.
What voltage does the ULLtraDIMM require?
It supports both 1.35 V and 1.5 V operations. It works with DDR3 transfer rates ranging from 800 MHz to 1333 MHz at either voltage, and 1600 MHz at 1.5 V.
Good reading and sources
The facts on this page come from the Wikipedia article "ULLtraDIMM", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.