TILE-Gx
VLIW multicore processor family by Tilera with mesh network architecture
TILE-Gx was a family of VLIW multicore processors designed by Tilera and manufactured by TSMC. Launched in 2010, it used a mesh network to connect up to 72 cores, targeting networking equipment before production ended in 2022 under Nvidia ownership.
- Designed by Tilera with VLIW RISC architecture
- Manufactured by TSMC on a 40nm process node
- Featured a mesh network connecting up to 72 cores
- Used in MikroTik CCR1000 series routers
- Production ended by Nvidia in 2022
What it is
TILE-Gx is a family of multicore central processing units based on a Very Long Instruction Word (VLIW) Reduced Instruction Set Computing (RISC) architecture. Tilera designed these chips, which feature a unique mesh network interconnect allowing cores to communicate directly. The series launched in 2010 and was fabricated using a 40 nanometre process by TSMC. While the design aimed to scale to 100 cores, the largest variant produced contained 72 cores. These processors were primarily intended for high-performance networking tasks, leveraging their parallel structure for packet processing and encryption.
How it came about
Tilera developed the TILE-Gx architecture to address the need for scalable multicore performance in networking infrastructure. The design promised significant core counts, though physical shipments peaked at 72 cores. After Tilera underwent several acquisitions, Nvidia eventually obtained the rights to the technology. Nvidia ceased production of the TILE-Gx line in 2022. Support within the mainline Linux kernel was removed in June 2018, marking the end of broad operating system backing for the platform.
Inside the chip
Each core in the TILE-Gx family is a 64-bit VLIW RISC unit capable of issuing three instructions per cycle. The chips include four multiply-accumulate units per cycle with Single Instruction Multiple Data extensions. Memory hierarchy consists of 64 KB of Level 1 cache split between data and instructions, plus 256 KB of Level 2 cache per core. The Level 3 cache is formed by accessing other cores' L2 memory via the on-chip mesh network. The design supports up to four ECC DDR3 memory controllers and 24 PCIe 2.0 lanes.
How it was made
TSMC manufactured the TILE-Gx processors using a 40 nanometre fabrication process. The chips operate at clock speeds ranging from 1000 MHz to 1200 MHz. Variants were produced with 9, 16, 36, or 72 cores. Some models included optional hardware accelerators for cryptography, offering 40 Gbit/s encryption for small packets and 20 Gbit/s full-duplex compression. These units also featured a true random number generator and an RSA accelerator to offload security tasks from the main cores.
Where it went
The primary commercial application for TILE-Gx chips was in networking hardware. MikroTik integrated these processors into its CCR1000 series of Cloud Core Routers. Although mainstream Linux support ended in 2018, MikroTik continues to maintain out-of-tree support for the architecture in its RouterOS distribution. This allows existing hardware to remain functional despite the discontinuation of the silicon by Nvidia in 2022.
Versions and family
The family included configurations with 9, 16, 36, and 72 cores. All variants shared the same fundamental VLIW RISC core design and mesh network topology. The architecture was related to earlier Tilera products like the TILE64 and TILEPro64, but TILE-Gx introduced the 64-bit VLIW approach. No successors were released after Nvidia halted production, leaving the 72-core model as the most powerful variant ever shipped.
Why it matters
TILE-Gx demonstrated the viability of mesh-connected multicore architectures for specific networking workloads. Its integration into MikroTik routers provided a path for high-throughput packet processing in commercial equipment. The eventual discontinuation by Nvidia and removal from the Linux kernel highlighted the challenges of maintaining niche architectures without continuous vendor support. It remains a notable example of VLIW application in modern multicore systems.
Questions people ask about TILE-Gx
What type of architecture does TILE-Gx use?
TILE-Gx uses a 64-bit VLIW (Very Long Instruction Word) RISC (Reduced Instruction Set Computing) architecture. Each core can issue three instructions per cycle and includes SIMD extensions for parallel data processing.
How do the cores communicate in TILE-Gx chips?
The cores are connected via an on-chip mesh network. This network allows cores to access each other's Level 2 cache, effectively creating a distributed Level 3 cache across the entire processor die.
Who currently supports TILE-Gx in software?
Mainline Linux kernel support was dropped in June 2018. However, MikroTik continues to support the architecture out-of-tree in its RouterOS distribution for its CCR1000 series routers that use these chips.
Good reading and sources
The facts on this page come from the Wikipedia article "TILE-Gx", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like TILE-Gx
All CPUs and microprocessorsMore from Tilera
All of them
🇺🇸 United StatesApple silicon
Arm-based chips designed by Apple for its devicesSoC · Arm · 2010
WorldGeForce 500 series
Nvidia Fermi-based graphics processor family from 2010GPU · GPU architecture · 2010