R5000
64-bit MIPS microprocessor for workstations and embedded systems
The R5000 is a 64-bit microprocessor designed by Quantum Effect Design in 1996. It implements the MIPS IV instruction set and features large caches to boost performance in low-end workstations and embedded devices.
- Launched in January 1996 by Quantum Effect Design
- Features 32 KB instruction and 32 KB data L1 caches
- Fabricated using 0.35 μm CMOS process technology
- Used in Silicon Graphics O2 and Indy workstations
- Basis for the Sony PlayStation 2 Emotion Engine CPU
What it is
The R5000 is a 64-bit microprocessor that executes instructions in order. Developed by Quantum Effect Design in 1996, it implements the MIPS IV architecture. The chip was designed to be cost-effective while delivering strong floating-point performance for 3D graphics. It served as a flagship processor for embedded systems and low-end workstations. Manufacturers included Integrated Device Technology, NEC, and NKK. The design prioritised simple logic with large caches to improve speed without complex circuitry.
How it came about
Quantum Effect Design created the R5000 to succeed the R4600 and R4700 models. MIPS Technologies funded the project and licensed the design to several partners. The chip launched in January 1996. Initial plans targeted 200 MHz, but the first versions reached only 180 MHz. It competed against processors from IBM, Motorola, HP, and Intel. In 1997, the R5000A was released as an updated successor. The design allowed for future multiprocessing support through reserved pins.
Inside the chip
This processor uses a two-way superscalar design. It can issue one integer and one floating-point instruction simultaneously. Separate pipelines handle these tasks to save space. The chip lacks dynamic branch prediction, relying instead on compiler hints. Large 32 KB caches for instructions and data are key features. These caches are virtually indexed and physically tagged. Predecoded instructions help the issue logic work faster. The floating-point unit is optimised for single-precision math, which benefits 3D graphics applications.
How it was made
Manufacturers used a 0.35 μm CMOS process to build the chip. Integrated Device Technology used two levels of polysilicon, resulting in 3.6 million transistors. NEC and NKK used one level, leading to 5.0 million transistors and a larger die. The die area ranged from 84 to 87 square millimetres. Most transistors were dedicated to caches. The chip came in plastic ball grid array or ceramic pin grid array packages. It was not pin-compatible with earlier MIPS processors.
Where it went
Silicon Graphics used the R5000 in O2 and Indy workstations. Siemens-Nixdorf also employed it in servers. Embedded applications included network routers and high-end printers. The arcade industry adopted the chip for mainboards in games by Atari and Midway. Early Cobalt Qube and RaQ server appliances used derivative models like the RM5230. These embedded versions powered small form-factor network devices before later models switched to x86 processors.
Versions and family
Derivatives include the RM5230 and RM5260, announced in 1997. These had smaller 16 KB caches and different bus widths. The RM5270 added an on-chip secondary cache controller. The RM52x1 family, released in 1998, used a 0.25 μm process and featured larger 32 KB caches. Later RM52x1A models used a 0.18 μm process for higher speeds and lower power. The Sony PlayStation 2 Emotion Engine is a modified R5000 with custom vector extensions.
Why it matters
The R5000 established a reputation for efficient floating-point performance at a low cost. Its design philosophy of simple logic paired with large caches influenced subsequent embedded processors. The chip remained relevant in embedded systems for many years. Derivatives continued production long after the original launch. It provided a migration path for users moving to more advanced MIPS chips like the RM7000. The architecture supported a wide range of industrial and consumer applications.
Questions people ask about R5000
What instruction set does the R5000 use?
The R5000 implements the MIPS IV instruction set architecture. It is a 64-bit design that supports bi-endian operation. This architecture allows it to run software compiled for MIPS IV systems.
Who manufactured the R5000 chip?
Integrated Device Technology, NEC, and NKK fabricated the original R5000. Later derivatives were made by Taiwan Semiconductor Manufacturing Company. Quantum Effect Design was a fabless company and did not manufacture chips itself.
What was the clock speed of the R5000?
The initial R5000 topped out at 180 MHz, missing its 200 MHz target. Later derivatives like the RM5271 reached speeds of up to 300 MHz. The RM5261A models operated between 250 and 400 MHz.
How much cache memory does the R5000 have?
The R5000 has two 32 KB Level 1 caches, one for instructions and one for data. It also includes an integrated controller for external Level 2 cache, supporting sizes up to 2 MB using synchronous SRAM.
Good reading and sources
The facts on this page come from the Wikipedia article "R5000", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like R5000
All CPUs and microprocessorsMore from Quantum Effect Devices
All of them
WorldR4200
Low-power MIPS III microprocessor for embedded systemsCPU · MIPS · 1993