Parallax SX
High-speed 8-bit RISC microcontroller line by Parallax
The Parallax SX is a discontinued family of 8-bit RISC microcontrollers designed by Ubicom and sold by Parallax. Known for speeds up to 75 MHz, these chips allowed software emulation of hardware interfaces, serving as the core for later BASIC Stamp products before production ended in 2009.
- Operates at speeds up to 75 MHz (75 MIPS)
- Uses software to emulate hardware interfaces like UART and SPI
- Production ended in 2009 after Ubicom stopped making dies
- Replaced PIC chips in later BASIC Stamp modules
- Available in 20, 28, and 48-pin packages only
What it is
The Parallax SX is a line of 8-bit reduced instruction set computing (RISC) microcontrollers. Although marketed by Parallax, the underlying design belongs to Ubicom, a company formerly known as Scenix. These chips are notable for their high operating speed, reaching up to 75 million instructions per second. This performance allows them to emulate hardware interfaces through software, a technique often called virtual devices. The SX series replaced older PIC chips in several versions of the popular BASIC Stamp development boards. Production of the silicon dies ceased in 2009, marking the end of the product line.
How it came about
Ubicom, previously called Scenix, created the architecture for these devices. The name SX derives from the former company name. Parallax handled the packaging and distribution, selling the chips to hobbyists and engineers. The design aimed to offer greater flexibility than the PIC microcontrollers used in early BASIC Stamp modules. As Parallax updated its product range, the SX became the standard processor for newer stamps. In July 2009, Parallax announced the end of life for the SX line because Ubicom stopped manufacturing the dies. Final stock was sold through a lifetime buy programme, after which no new units would be available.
Inside the chip
These microcontrollers use an 8-bit RISC architecture with a 12-bit instruction word. They operate at frequencies up to 75 MHz, providing significant processing headroom for their class. Memory resources include up to 4096 words of Flash storage and 262 bytes of random-access memory. An eight-bit counter and support logic are integrated on the die. The high clock speed enables the chip to simulate peripheral hardware in code. Developers can create virtual universal asynchronous receiver-transmitters, serial interfaces, and pulse-width modulation generators. This software-defined approach reduces the need for external components, allowing compact circuit designs.
How it was made
Ubicom manufactured the silicon dies for the SX series. Parallax did not produce the silicon itself but handled the final packaging and distribution. The original design supported packages with 18, 20, 28, 48, and 52 pins. However, Parallax lacked the capability to package the 18-pin and 52-pin variants. Consequently, the SX-18 and SX-52 models were discontinued early in the product lifecycle. The remaining chips were available in 20, 28, and 48-pin configurations. No specific manufacturing process node or transistor count is publicly detailed in the available records.
Where it went
The primary application for the SX microcontroller was within Parallax’s BASIC Stamp modules. These boards are widely used in education and hobbyist electronics for rapid prototyping. The ability to emulate interfaces meant users could connect various sensors and displays without extra hardware. Software libraries provided ready-made code for common tasks like measuring frequency or generating analog signals. Developers also used the chips for custom video controllers and communication protocols. The flexibility made them suitable for embedded systems where space and component count are critical constraints.
Versions and family
The family included several pin-count options, though only the 20, 28, and 48-pin versions reached the market. The SX-18 and SX-52 were planned but cancelled due to packaging limitations at Parallax. Development tools varied from the full-featured Sx-Key, which included debugging hardware, to the cheaper SX-Blitz programmer. Software support included an assembler and simulator for Windows. Third-party tools offered C language compilation, such as the commercial CCS SX/C and the free C4SX compiler. Linux users could utilize open-source assemblers like gsasm and programmers like gSXprog.
Why it matters
The SX series demonstrated that low-cost microcontrollers could perform complex tasks through software emulation. It bridged the gap between simple 8-bit devices and more expensive processors. For many users, it was their introduction to high-speed embedded programming. The transition from PIC to SX in the BASIC Stamp line showed a commitment to performance improvements. Although discontinued, the concept of virtual peripherals influenced later designs, including the Parallax Propeller. The Propeller expanded on this idea with multiple cores, continuing the legacy of software-defined hardware initiated by the SX.
Problems and reception
Users appreciated the speed and flexibility of the SX chips. The availability of software libraries simplified complex interface tasks. However, some developers faced issues with the Windows-based development tools, particularly on Windows Vista due to missing dynamic link libraries. The lack of native Linux support required workarounds like Wine or community-developed tools. The abrupt end of production in 2009 surprised some long-term users, though Parallax maintained support for existing products. The reliance on a single foundry partner, Ubicom, proved to be a supply chain vulnerability.
Questions people ask about Parallax SX
Who designed the Parallax SX microcontroller?
The SX microcontroller was designed by Ubicom, a company formerly known as Scenix. Parallax marketed and packaged the chips, but the intellectual property and die manufacturing remained with Ubicom.
Why were the SX-18 and SX-52 models discontinued?
Ubicom produced dies for 18, 20, 28, 48, and 52-pin configurations. Parallax did not have the necessary packages for the 18-pin and 52-pin versions, so those specific models were never released or were quickly discontinued.
Can I still buy new Parallax SX chips today?
No. Parallax announced the end of life for the SX line on July 31, 2009. Once the final inventory from the lifetime buy was exhausted, no new chips were manufactured or restocked.
What makes the SX different from other 8-bit microcontrollers?
Its high clock speed of up to 75 MHz allows it to emulate hardware peripherals in software. This means developers can create virtual devices like video controllers or communication interfaces without extra chips.
Good reading and sources
The facts on this page come from the Wikipedia article "Parallax SX", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like Parallax SX
All microcontrollers
🇺🇸 United StatesBlackfin
Hybrid microprocessor and DSP family by Analog DevicesMicrocontroller · RISC · 2000
🇺🇸 United StatesMOS Technology 6532
Integrated circuit combining RAM, I/O ports and a timer for 1970s systems.Microcontroller · Other