68HC05
8-bit microcontroller family for embedded systems
The 68HC05 is an 8-bit microcontroller series originally developed by Motorola Semiconductor. It uses a von Neumann architecture and was widely used in embedded applications before being succeeded by the HC(S)08 series.
- 8-bit microcontroller family from Motorola
- Uses von Neumann architecture and memory-mapped I/O
- Featured in-circuit programming via serial bootloader
- Replaced by the HC(S)08 MCU series
What it is
The 68HC05, often shortened to HC05, is a broad family of 8-bit microcontrollers. It was created by Motorola Semiconductor, which later became Freescale and then part of NXP. These chips are designed for embedded applications where simple control logic is needed. They share their lineage with the older 6800 processor series. The family is known for using a von Neumann architecture, meaning instructions and data share the same memory space. It also employs memory-mapped input and output, allowing peripheral devices to be controlled like memory locations. Although now considered legacy technology, it played a significant role in early embedded systems design.
How it came about
The 68HC05 family evolved from the Motorola 6805. It broke new ground in the late 1980s with variants like the MC68HC805C4 and MC68HC805B6. These specific models included EEPROM, which allowed them to retain data without power. A key feature was the ability to be programmed in-circuit using a serial bootloader. This meant developers could use simple software on a personal computer and a low current 19 V supply to program the chip, removing the need for specialized programming hardware. This ease of use helped it gain popularity in various industrial and consumer embedded projects.
Inside the chip
The HC05 uses a von Neumann architecture with five main CPU registers that are separate from general memory. These include an 8-bit accumulator for arithmetic, an 8-bit index register for addressing, and an 8-bit condition code register for status flags. The stack pointer is also 8-bit, but its two most significant bits are hardwired to 1, limiting the stack depth. The program counter is 13 bits wide, allowing it to address up to 8 KB of memory. Input and output operations are handled through memory-mapped I/O, simplifying the interface between the processor and external peripherals.
How it was made
Specific manufacturing details such as the process node or transistor count are not provided in the available records. The family includes various variants produced over time by Motorola and its successors. The introduction of EEPROM-based models in the late 1980s marked a shift in how these microcontrollers were manufactured and programmed, allowing for more flexible production workflows without dedicated programmers.
Where it went
These microcontrollers were targeted at different embedded applications. Their simplicity and low cost made them suitable for consumer electronics, automotive controls, and industrial devices. The ability to program them in-circuit made them attractive for prototypes and small production runs. While specific end-products are not listed, the architecture suggests use in devices requiring basic control functions rather than high-performance computing.
Versions and family
The family includes several processor sub-families. Notable variants include the MC68HC805C4 and MC68HC805B6, which featured EEPROM. The HC05 series is now considered legacy. It has been replaced by the HC(S)08 MCU series, which offers improved performance and features while maintaining some compatibility with the earlier design philosophy.
Why it matters
The 68HC05 established a standard for simple, cost-effective 8-bit control. Its in-circuit programming capability influenced how microcontrollers were developed and deployed in the late 1980s and 1990s. By removing the need for expensive programmers, it lowered the barrier to entry for many embedded projects. Its legacy continues through its successor families, which build upon its architectural foundations.


Questions people ask about 68HC05
What architecture does the 68HC05 use?
The 68HC05 uses a von Neumann architecture, where program instructions and data share the same memory space. It also uses memory-mapped I/O for controlling peripherals.
How was the 68HC05 programmed?
Later variants like the MC68HC805C4 could be programmed in-circuit using a serial bootloader. This required only simple PC software and a 19 V supply, eliminating the need for a dedicated programmer.
What replaced the 68HC05 family?
The HC05 series is now considered legacy technology. It has been replaced by the HC(S)08 MCU series, which serves as its modern successor in the product line.
Good reading and sources
- Motorola 68HC05 on WikipediaEncyclopedia
- More photos on Wikimedia CommonsPhotos
- Wikidata recordOpen data
The facts on this page come from the Wikipedia article "Motorola 68HC05", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like 68HC05
All microcontrollers
🇺🇸 United StatesTMS7000
Texas Instruments 8-bit single-chip microcontroller family with custom instruction optionsMicrocontroller · 8-bit