XC800
An 8-bit microcontroller series from Infineon for automotive and industrial control.
Infineon Technologies launched the XC800 in 2005 as an 8-bit microcontroller line. It uses a specialized 8051 core to handle motor control and vehicle systems.
- Launched in 2005 by Infineon Technologies.
- Uses a dual-cycle optimized 8051 E-Warp core.
- Divided into Automotive (A-Family) and Industrial (I-Family).
- Includes a 16-bit co-processor for math operations.
- Supports CAN bus with Infineon's MultiCan extension.
What it is
The XC800 is a range of eight-bit microcontrollers created by Infineon Technologies. First appearing in 2005, these chips use a unique dual-cycle optimized core based on the classic 8051 architecture. The product line splits into two main groups: the A-Family designed specifically for automotive environments and the I-Family intended for industrial and general multi-market uses. These devices are built to manage tasks like motor driving, sensor reading, and user interface controls in noisy or demanding settings.
How it came about
Infineon introduced this family in 2005 to address the need for efficient control in vehicles and machinery. The design team focused on optimizing the traditional 8051 instruction set for speed, creating what they called the E-Warp core. This allowed the chips to execute instructions faster than standard versions while maintaining compatibility. The launch established a platform that could serve both strict automotive standards and broader industrial applications simultaneously.
Inside the chip
The core handles instructions that vary in length, taking one, two, or four machine cycles to complete. A sixteen-bit co-processor assists with complex math, including multiplication, division, and trigonometric calculations via the CORDIC algorithm. Memory includes up to sixty-four kilobytes of flash storage and three kilobytes of RAM. The system features error correction for the flash memory to prevent code corruption. Analog signals are converted using a ten-bit successive approximation ADC, which can be triggered by timer events for precise control loops.
How it was made
Specific manufacturing process nodes and transistor counts are not provided in the available documentation. The chips operate on a single 2.5-volt supply managed by an embedded voltage regulator. Packaging options range from sixteen pins to sixty-four pins, allowing flexibility for different board sizes. The flash memory is sectorized, meaning individual sections can be erased without affecting the rest of the stored program.
Where it went
In the automotive sector, these microcontrollers manage safety and powertrain functions. They control motorcycle body control modules, window lifts, steering angle sensors, and low-end airbag systems. The industrial variant handles e-bike motors, pumps, fans, and digital power supplies. They also drive display panels and touch button interfaces. All automotive versions comply with the AEC Q100 reliability standards for car electronics.
Versions and family
The family divides into the A-Family for automotive use and the I-Family for industrial markets. The I-Family offers flash memory capacities between two kilobytes and sixty-four kilobytes. Specific variants include support for MultiCAN, an enhanced controller area network protocol developed by Infineon. This version adds more message objects and supports TTCAN level 2 for time-triggered communication in vehicles.
Why it matters
The XC800 series provided a robust solution for motor control and vehicle networking before modern high-performance processors became common in these roles. Its integration of CAN bus capabilities and specialized timer units made it suitable for complex systems like brushless DC motors and AC drives. The availability of free development tools like DAVE Bench helped lower the barrier for engineers adopting the platform.
Questions people ask about XC800
What kind of processor does the XC800 use?
It uses an 8-bit core based on the 8051 architecture. Infineon calls this the E-Warp core because it optimizes instruction execution to take fewer cycles than standard designs.
Is the XC800 used in cars?
Yes, the A-Family is designed for automotive applications. It handles tasks like lighting, window lifts, and steering sensors, meeting the AEC Q100 quality standards for car parts.
How much memory do these chips have?
They feature up to 64KB of flash memory for code and data. There is also up to 3KB of RAM, which includes some extended RAM (XRAM) for faster access.
What programming tools are available?
Infineon provides free tools like DAVE Bench, which is an Eclipse-based IDE. It includes the SDCC compiler and debugger. Evaluation kits and starter boards are also available for testing.
Good reading and sources
The facts on this page come from the Wikipedia article "XC800 family", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-15.
Like XC800
All microcontrollers
🇺🇸 United StatesBlackfin
Hybrid microprocessor and DSP family by Analog DevicesMicrocontroller · RISC · 2000
More from Infineon Technologies
All of them
🇺🇸 United StatesPSoC
Configurable microcontroller with mixed-signal blocksMicrocontroller · Arm · 2002
🇩🇪 GermanyTriCore
A 32-bit microcontroller architecture from Infineon combining RISC and DSP features.Microcontroller · RISC · 1999
WorldRLDRAM
Low-latency dynamic memory for networking and embedded systemsMemory · 1999
🇩🇪 GermanyXMC4000
Industrial 32-bit ARM Cortex-M4 microcontroller family by InfineonMicrocontroller · Arm · 2012